Dreame L10s Pro Gen2 Руководство по эксплуатации онлайн [11/26] 875880

16 17

ENEN

Routine Maintenance

Main Brush

1. Press the brush guard clips inwards to remove the brush guard and

lift the brush out of the robot.

Mopping Module

1. Open the robot's cover and press the clip to remove the water tank. Pour

out the water in the tank. Clean the tank with water only and leave to air dry

before use.

Note: Do not directly expose the water tank to sunlight.

2. Remove the mop pads from the mop pad holder. Clean the mop pads with

water only and leave it to air dry before use.

3. If slow water flow occurs, or the water volume is not well-distributed,

clean the air hole in the cover of the water tank.

Routine Maintenance

Side Brush & Mop Pad Holder

Remove and clean the side brush and mop pad holder.

Omnidirectional Wheel

Note:

Use a tool such as a small screwdriver to separate the axle and tire of

the omnidirectional wheel. Do not use excessive force.

Rinse the omnidirectional wheel under the running water and put it

back after drying it completely.

2. Pull out the brush covers at both ends of the brush as shown in the

diagram. Use a proper cleaning tool to remove any hair tangled in the

brush. Reinstall the brush covers on both ends of the brush, and then

reinstall the brush. Press on the brush guard to lock it in place.