Bosch ROTAK 32 [22/261] Troubleshooting

Bosch ROTAK 32 [22/261] Troubleshooting
22 | English
F 016 L70 585 | (10.11.09) Bosch Power Tools
Troubleshooting
The following chart lists problem symptoms, possible causes and corrective action, if your garden
product does not operate properly. If these do not identify and correct the problem, contact your
service agent.
f Warning: Switch off and remove plug from mains before investigating fault.
Problem Possible Cause Corrective Action
Motor refuses to start Power turned off Turn power on
Mains socket faulty Use another socket
Extension cable damaged Inspect cable, replace if dam-
aged
Fuse faulty/blown Replace fuse
Possible clogging Check underneath the garden
product and clear out as neces-
sary (always wear gardening
gloves)
Motor protector has activated Allow motor to cool and in-
crease height of cut
Mowing too low for the condi-
tions
Increase height of cut
Garden product functions
intermittently
Extension cable damaged Inspect cable, replace if dam-
aged
Internal wiring of garden
product damaged
Contact Service Agent
Motor protector has activated Allow motor to cool and in-
crease height of cut
Garden product leaves ragged
finish
and/or
Motor labours
Height of cut too low Increase height of cut (see “Ad-
justing the Cutting Height
(see figure F)”)
Cutting blade dull Replacing the blade (see “Blade
Maintenance (see figure I)”)
Possible clogging Check underneath the garden
product and clear out as neces-
sary (always wear gardening
gloves)
Blade fitted upside down Refit blade correctly (see
“Blade Maintenance
(see figure I)”)
Blade not rotating while garden
product switched on
Cutting blade obstructed Switch off garden product
Clear obstruction (always wear
gardening gloves)
Blade nut/bolt loose Tighten blade nut/bolt
Excessive vibrations/noise Blade nut/bolt loose Tighten blade nut/bolt
Cutting blade damaged Replacing the blade
OBJ_BUCH-1068-001.book Page 22 Tuesday, November 10, 2009 9:41 AM

Содержание