Brother M 1034D — выбор строчек для швейных машин: обметочные и декоративные [25/35]

Содержание

• Use this sewing machine only for its intended use as described in this manual use only accessories p.2
• Never drop or insert any object into any openings p.2
• Danger p.2
• To reduce the risk of electric shock p.2
• Near children p.2
• Caution p.2
• To reduce the risk of burns fire electric shock or injury to persons p.2
• Machine from the electrical outlet immediately after using and before cleaning p.2
• Been dropped or damaged or dropped into water return the sewing machine to the nearest p.2
• To disconnect turn the main switch to the symbol o position which represents off then remove plug p.2
• Keep fingers away from all moving parts special care is required around the sewing machine needle p.2
• Authorized dealer or service center for examination repair electrical or mechanical adjustment p.2
• This sewing machine is not intended for use by young children or infirm persons without supervision p.2
• Including the following p.2
• Area such as threading needle changing needle or changing presser foot and the like p.2
• This sewing machine is intended for household p.2
• Important safety instructions p.2
• Always use the proper needle plate the wrong plate can cause the needle to break p.2
• If the plug does not fit fully in the outlet reverse the plug p.2
• Always unplug the sewing machine from the electrical outlet when removing covers lubricating or p.2
• This appliance has a polarized plug one blade wider than the other to reduce p.2
• If it still does not fit contact a qualified electrician to install the proper outlet p.2
• Always unplug before relamping replace bulb with same type rated 15 watts p.2
• Эта швейная машина предназначена только для бытового применения p.2
• The sewing machine should never be left unattended when plugged in always unplug this sewing p.2
• From outlet p.2
• Сохраните это руководство p.2
• The risk of electric shock this plug is intended to fit in a polarized outlet only one way p.2
• Do not use outdoors p.2
• Предупреждение p.2
• Switch the sewing machine to the symbol o position when making any adjustments in the needle p.2
• Do not use bent needles p.2
• Инструкции по безопасности p.2
• Sewing machine and foot controller free from the accumulation of lint dust and loose cloth p.2
• Do not unplug by pulling on cord to unplug grasp the plug not the cord p.2
• Внимание p.2
• Save these instructions p.2
• Young children should be supervised to ensure that they do not play with this sewing machine p.2
• Recommended by the manufacturer as contained in this manual p.2
• Do not pull or push fabric while stitching it may deflect the needle causing it to break p.2
• When using the sewing machine ba ic safety precautions should always be followed p.2
• Read all instructions before using p.2
• Do not operate where aerosol spray products are being used or where oxygen is being administered p.2
• When making any other user servicing adjustments mentioned in the instruction manual p.2
• Never operate this sewing machine if it has a damaged cord or plug if it is not working properly if it has p.2
• Do not modify the plug in any way p.2
• Warning p.2
• Never operate the sewing machine with any air openings blocked keep ventilation openings of the p.2
• Do not allow to be used as a toy close attention is necessary when the sewing machine is used by or p.2
• From the ventilating holes on the back and p.3
• Sides of the machine so air can get to these p.3
• Замечания о двигателе p.3
• Seen through the ventilating hole in the motor p.3
• Disconnected from the supply by removing the p.3
• When threading the machine replacing a p.3
• Removing covers or changing lamps the p.3
• Continuous operation of the sewing machine p.3
• When the motor is running sparks can be p.3
• Removed from the socket outlet p.3
• Caution p.3
• When servicing the sewing machine or when p.3
• Quite fast compared to the normal operating p.3
• Can cause heat to build in the motor area but p.3
• When leaving this sewing machine p.3
• Plug from the socket outlet p.3
• Brushes and the commutator and are part of p.3
• We recommend disconnecting the electric p.3
• Performance p.3
• Bracket on the side opposite the hand wheel p.3
• Unattended the main switch of the machine p.3
• Notes on the motor p.3
• These sparks are produced by the carbon p.3
• Not enough to adversely affect its p.3
• The ordinary foot operated sewing machine p.3
• Needle or when the machine is not in use p.3
• The normal operating speed of this sewing p.3
• Must be switched off or the plug must be p.3
• Mounted in oil soaked felt to withstand long p.3
• The machines normal operation p.3
• Machine or the electrical set must be p.3
• The bearings in the motor are made of a p.3
• Machine is 1 300 stitches per minute which is p.3
• Supply plug to avoid any possible hazards p.3
• It is important to keep fabric and paper away p.3
• Speed of 300 to 800 stitches per minute for p.3
• Hours of continuous operation p.3
• Special sintered oil impregnated alloy p.3
• Table of contents p.4
• Содержание p.4
• Names of parts and p.5
• Upperlooper p.5
• Material slide plate for overlock stitch p.5
• Upper knife p.5
• Material plate cover p.5
• Thread tree p.5
• Main power switch and light switch p.5
• Thread take up cover p.5
• Lowerlooper threading lever p.5
• Their functions p.5
• Lowerlooper thread tension dial p.5
• Stitch width lever p.5
• Stitch length adjustment dial p.5
• Lowerlooper p.5
• Stitch finger p.5
• Left needle thread tension dial p.5
• Spool support p.5
• Knife lever p.5
• Spool stand thread tree support p.5
• Handle p.5
• Spool pin p.5
• Hand wheel p.5
• Right needle thread tension dial p.5
• Front cover p.5
• Presser foot pressure adjustment screw p.5
• Free arm cover p.5
• Наименование p.5
• Presser foot lifting lever p.5
• Differential feed ratio adjustment lever p.5
• Деталей и их функции p.5
• Presser foot p.5
• Bed extension p.5
• Upperlooper thread tension dial p.5
• Needles p.5
• Установка снятие лотка p.6
• Принадлежности p.6
• Дополнительные p.6
• Для обрезков p.6
• В комплекте поставки p.6
• With your serger p.6
• Trim trap p.6
• Option p.6
• Installing removing the p.6
• Accessories included p.6
• To remove the needle p.7
• Needle plate glass etc p.7
• 2 turn the hand wheel until the needle bar is at p.7
• To insert the needle p.7
• Needle p.7
• 2 turn the hand wheel counter clockwise by p.7
• Tighten p.7
• Machine needle p.7
• 1 turn the main power switch to the off p.7
• This machine uses a standard home sewing p.7
• Loosen p.7
• Them both at the same time p.7
• Keep this in mind when you loosen the set p.7
• Its highest position p.7
• The two needles with one hand and then insert p.7
• If the needles have been inserted correctly p.7
• The right needle should be set slightly lower p.7
• Hexagonal wrench p.7
• The recommended needle is schmetz 130 p.7
• Hand until the needle is at its highest position p.7
• The needle set screw holds both needles p.7
• Groove p.7
• Than the left one p.7
• Flat side p.7
• Screw to exchange one or both needles p.7
• Position p.7
• Check to see if the space is parallel p.7
• Игла p.7
• Place the needle on its flat side and p.7
• Caution p.7
• You and insert it up as far as it will go p.7
• One needle models p.7
• 4 tighten the needle set screw securely with the p.7
• Wrench and remove the needle p.7
• On two needle models we suggest you hold p.7
• 3 loosen the needle set screw with hexagonal p.7
• Two needle models p.7
• Needle set screw p.7
• 3 hold the needle with its flat side away from p.7
• Крышки p.8
• Закрывание лицевой p.8
• Двигателя p.8
• Включение машины p.8
• Turning direction of p.8
• Preparation p.8
• Powering the machine p.8
• Operation p.8
• Operating p.8
• Opening and closing the p.8
• Main power and sewing light switch p.8
• Front cover p.8
• Открывание и p.8
• Начало работы p.8
• Направление вращения p.8
• Снятие платформы p.9
• Снятие p.9
• Свободный рукав p.9
• Приставки для шитья с p.9
• Платформы приставки p.9
• Использованием функции p.9
• Длина стежка p.9
• Stitch width p.9
• Stitch length p.9
• Removing the bed p.9
• Free arm sewing p.9
• Extension for p.9
• Extension p.9
• Ширина строчки p.9
• Stretching or p.10
• Front feed dogs move faster than the back feed p.10
• Serging stretch fabrics p.10
• Forward p.10
• Pushed together p.10
• Feed ratio main feed rear differential feed front effect application p.10
• Puckering p.10
• Feed ratio is set at less than 1 the front feed dogs p.10
• Подачи ткани модели с p.10
• Prevents thin p.10
• Feed adjustment lever p.10
• Подачей ткани p.10
• Dogs when set at 1 the feed dogs are moving at p.10
• Использованию p.10
• Prevents stretch p.10
• Dogs gathering the fabric as it is sewn this p.10
• Инструкции по p.10
• On the left side of the machine p.10
• Differential feed ratio is set at greater than 1 the p.10
• Дифференциальной p.10
• Movement of both the front and the rear feed p.10
• Differential feed normal sewing p.10
• Without p.10
• Move slower than the rear feed dogs stretching p.10
• Differential feed p.10
• With differential feed p.10
• Mechanism models p.10
• 4 to set greater than 1 move the lever p.10
• Under the presser foot to move the fabric through p.10
• Materials from p.10
• To adjust the differential feed p.10
• Material is p.10
• 3 to set less than 1 move the lever back p.10
• This serger is equipped with two sets of feed dogs p.10
• Lightweight fabric that may pucker when the p.10
• 2 the normal setting is 1 on the differential p.10
• The same speed ratio of 1 when the differential p.10
• Instructions for the p.10
• 1 locate the differential feed adjustment lever p.10
• The machine the differential feed controls the p.10
• Gathered or p.10
• 1 ___ ___ material is pulled p.10
• The fabric as it is sewn this is effective on p.10
• Function assists in removing the rippling when p.10
• Differential feed as it may damage the p.11
• Caution p.11
• Before threading p.11
• Приготовления перед p.11
• Перед заправкой нити p.11
• Заправкой нити p.11
• When threading always thread in this p.11
• When sewing thick non stretchable p.11
• Threading p.11
• Preparation before p.11
• Order upperlooper lowerlooper right p.11
• Needle and then the left needle p.11
• Material such as denim do not use the p.11
• Fabric p.11
• Turning the handwheel toward you p.12
• Q thread tension release button p.12
• 3 release the button p.12
• Turn the handwheel to find the easiest position p.12
• Off the spool p.12
• 2 raise the presser foot using presser foot lever p.12
• To lift the presser foot lever and also take p.12
• Net supplied to prevent the thread from slipping p.12
• 2 pass the thread through the tension disc p.12
• Thread tension discs p.12
• Needle thread and then the left needle thread p.12
• 1 turn off the main power switch for safety p.12
• Перед заправкой нити p.12
• Thread tension dial p.12
• Make sure that the spool notch is on the bottom p.12
• 1 hold the tension release button directly above p.12
• Натяжения p.12
• If you are sewing with loosely spun nylon thread p.12
• Колпачок катушки с нитью p.12
• Thread spool cap p.12
• How to use the thread net p.12
• Кнопка освобождения p.12
• This serger is equipped with a thread tension p.12
• How to use the thread p.12
• Как использовать сетку p.12
• Then the left needle p.12
• For threading and then thread the p.12
• Как использовать p.12
• The tension adjustment wheel to the right p.12
• Correct p.12
• Для катушки с нитью p.12
• The proper threading order for this serger is p.12
• Which is in the channel next to the tension p.12
• Tension release button p.12
• Caution p.12
• When using sewing thread spools the thread p.12
• Spool cap should be used as illustrated below p.12
• Care to thread in the proper order p.12
• When threading the needle always be sure p.12
• Spool cap p.12
• Before threading p.12
• We recommend that you cover the spool with the p.12
• Slide to the right p.12
• Adjustment dial p.12
• Upperlooper thread lowerlooper thread right p.12
• See fig p.12
• Adapt the net to the shape of the spool see fig p.12
• Upperlooper lowerlooper right needle and p.12
• Release button when threading be sure to p.12
• 3 set the needle bar in its highest position by p.12
• Верхний петлитель p.13
• Release button to the right then pass p.13
• 4 pass the thread through the proper p.13
• Which is in the channel next to the green p.13
• Points next to the green color marks p.13
• 3 pull the thread about an extra 15cm p.13
• Upperlooper p.13
• Pass the thread through the threading p.13
• 2 pull the thread off the spool and directly p.13
• Up through the thread guide on the p.13
• Next to each threading point p.13
• Threading the p.13
• If the upperlooper thread breaks during p.13
• Thread tree from back to front p.13
• Happens lower the upperlooper by turning the p.13
• Thread tree p.13
• Hand wheel remove the lowerlooper thread from p.13
• Thread guide p.13
• Getting caught on the upperlooper if this p.13
• This may be caused by the lowerlooper thread p.13
• From at least the tension disc p.13
• The upperlooper and re thread the upperlooper p.13
• Following the numerical order in the p.13
• Following the green color and the numbers p.13
• The thread through the tension disc p.13
• D slide and hold the thread tension p.13
• Tension adjustment dial release the p.13
• Button p.13
• T open the front cover by sliding to the p.13
• Accompanying illustration p.13
• Sewing p.13
• 6 inches through the front of the p.13
• Run the thread in the sequence illustrated p.13
• Заправка нити в p.13
• Right and guiding the top toward you p.13
• 6 guide the thread down the channel and p.13
• If the lowerlooper thread breaks during p.14
• Thread the needles after the lowerlooper p.14
• Pull the thread about an extra 15cm 6 p.14
• Guide the thread down the channel and p.14
• Thread guide p.14
• Points next to the blue color marks p.14
• Following the numerical order in the p.14
• The threading is not done in the proper sequence p.14
• Pass the thread through the threading p.14
• Following the blue color and the numbers next p.14
• The thread through the tension disc p.14
• Pass the thread through the proper p.14
• The needles before re threading the p.14
• Open the front cover by sliding to the p.14
• Directions shown by the arrow forcefully p.14
• The machine will not operate properly if p.14
• Of the threading lever p.14
• Direction may damage it p.14
• Tension adjustment dial release the p.14
• Moving the threading lever in any other p.14
• Caution p.14
• Петлитель p.14
• Slide the threading lever only in the p.14
• Lowerlooper threading lever to the left which p.14
• Button p.14
• Заправка нити в нижний p.14
• Slide and hold the thread tension p.14
• Lowerlooper threading lever p.14
• And upperlooper have been threaded p.14
• Which is in the channel next to the blue p.14
• Sewing cut and remove thread from both of p.14
• Lowerlooper make sure that the lowerlooper p.14
• Accompanying illustration up to the p.14
• Run the thread in the sequence illustrated p.14
• Lowerlooper easy threading operation p.14
• 5 make sure that the pink triangular marks line p.14
• When sliding the lowerlooper threading p.14
• Right and guiding the top toward you p.14
• Lowerlooper p.14
• 4 holding the end of the thread slide the p.14
• Up through the thread guide on the p.14
• Returns it to its standard position p.14
• Lever to the left always make sure that the p.14
• 3 place the thread through the eye of the p.14
• Two pink triangular marks line up as p.14
• Release button to the right then pass p.14
• Inches through the front of the thread p.14
• 2 position the thread under the hook left end p.14
• To each threading point p.14
• Re threading is done exactly as diagrammed p.14
• Illustrated on page 21 p.14
• 1 slide the lowerlooper threading lever to the p.14
• Threading the p.14
• Illustrated p.14
• Thread tree from back to front p.14
• Pull the thread off the spool and directly p.14
• Thread guide p.15
• Inches through the front of the thread p.15
• The thread through the tension disc p.15
• Guide the thread down the channel and p.15
• The right needle from front to back p.15
• Guide 7 above the needle and through p.15
• The numerical order in the p.15
• Button p.15
• Bring the thread down through the p.15
• Tension adjustment dial release the p.15
• Across through the threading points p.15
• Slide and hold the thread tension p.15
• Accompanying illustration p.15
• Run the thread in the sequence illustrated on p.15
• Release button to the right then pass p.15
• Pull the thread off the spool and directly p.15
• Иглу модели с двойной p.15
• Pull the thread about an extra 15cm 6 p.15
• Иглой p.15
• Pass the thread through the proper p.15
• Заправка нити в правую p.15
• Page 22 following the pink color and the p.15
• Which is in the channel next to the pink p.15
• Numbers next to each threading point p.15
• Up through the thread guide on the p.15
• Next to the pink color marks following p.15
• Threading the right p.15
• Needle on two needle p.15
• Thread tree from back to front p.15
• Models p.15
• Which is in the channel next to the yellow p.16
• Next to each threading point p.16
• Up through the thread guide on the p.16
• Inches through the front of the thread p.16
• Threading the left needle p.16
• Guide the thread down the channel and p.16
• Thread tree from back to front p.16
• Guide 7 above the needle and through p.16
• Thread guide p.16
• Following the yellow color and the numbers p.16
• The thread through the tension disc p.16
• Button p.16
• The numerical order in the p.16
• Bring the thread down through the p.16
• The left needle from front to back p.16
• Across through the threading points p.16
• Tension adjustment dial release the p.16
• Accompanying illustration p.16
• Slide and hold the thread tension p.16
• Run the thread in the sequence illustrated p.16
• Release button to the right then pass p.16
• Pull the thread off the spool and directly p.16
• Pull the thread about an extra 15cm 6 p.16
• Pass the thread through the proper p.16
• Иглу p.16
• Заправка нити в левую p.16
• Next to the yellow color marks following p.16
• Polyester 30 60 p.17
• Light georgette p.17
• Overlock stitch 3 4 p.17
• Lawn materials _ organdy p.17
• Сравнительная таблица материалов p.17
• Overlock stitch 2 3 p.17
• Knitted p.17
• Для шитья нитей и игл p.17
• Organdy p.17
• Jersey p.17
• Woolly nylon thread p.17
• Hem stitch p.17
• Tricot p.17
• Nylon 80 p.17
• Heavy tweed p.17
• Threads and needles p.17
• Nylon 50 80 p.17
• Gingham p.17
• Spun 80 p.17
• Nylon 30 60 p.17
• Decorative thread will work best in the upperlooper for fashion sewing p.17
• Spun 60 80 p.17
• Needle thread p.17
• Crepe de chine p.17
• Smaller than p.17
• Narrow rolled p.17
• Silk 80 100 p.17
• Mm thread needle p.17
• Cotton 80 100 p.17
• Silk 50 80 p.17
• Medium seersucker p.17
• Cotton 60 80 p.17
• Silk 40 60 p.17
• Materials lawn p.17
• Cotton 40 60 p.17
• Schmetz p.17
• Materials gabardine p.17
• Comparison chart of sewing materials p.17
• Poplin p.17
• Materials denim p.17
• Cashmere p.17
• Polyester 80 p.17
• Material stitch stitch length p.17
• Polyester 50 80 p.17
• Looper thread p.17
• Sewing is possible at position 4 for most p.18
• For medium tension p.18
• 1 to select the correct tension refer to the p.18
• Set from 5 to 3 p.18
• For light tension p.18
• Set from 4 to 7 p.18
• For heavy tension p.18
• Set from 4 to 2 p.18
• Each needle thread the lowerlooper thread p.18
• Натяжение нитей p.18
• Seated in the tension discs by holding the p.18
• Different tension setting from the illustration p.18
• Yellow marked tension disc is for left p.18
• Pink marked tension disc is for right p.18
• Dial upto decrease tension p.18
• Upperlooper p.18
• Passing the thread through the tension p.18
• Dial down to increase tension p.18
• Thread used thread tension adjustments may p.18
• On the previous or following pages p.18
• Circumstances if improper stitching occurs p.18
• Thread tension may vary according to the type p.18
• Needle p.18
• Caution p.18
• Thread tension dial p.18
• Be necessary for any change in sewing p.18
• Thread tension p.18
• Materials p.18
• And thickness of the fabric and the type of p.18
• There is a thread tension adjustment dial for p.18
• Make sure that the thread is properly p.18
• And the upperlooper thread the correct p.18
• The illustrations in this case on following p.18
• Lowerlooper p.18
• Adjusting the thread tension p.18
• Tension selection mark p.18
• Illustration on the previous page p.18
• Adjust the tension according to the drawing p.18
• Tension release button to the right while p.18
• If the stitch quality is insufficient select a p.18
• Tension control p.18
• Green marked tension disc is for p.18
• 4 blue marked tension disc is for p.18
• Standard span 60 3z p.18
• From the left to right p.18
• 2 if you cannot find the correct tension refer to p.18
• 3 upperlooper thread p.19
• Right needle thread is loose p.19
• 2 right needle thread p.19
• Таблица настройки натяжения нити p.19
• Right needle thread p.19
• 1 left needle thread p.19
• Двойная игла четыре нити p.19
• Order of thread tension adjustment p.19
• When you adjust the thread tension do it in the p.19
• Lowerlooper thread is tight p.19
• Upperlooper thread is tight p.19
• Lowerlooper thread is loose p.19
• Upperlooper thread is loose p.19
• Lowerlooper thread p.19
• Upperlooper thread p.19
• Loosen upperlooper thread green p.19
• Two needle four thread p.19
• Loosen right needle thread pink p.19
• Tighten upperlooper thread green p.19
• Loosen lowerlooper thread blue p.19
• Tighten right needle thread pink p.19
• Loosen left needle thread yellow p.19
• Tighten lowerlooper thread blue p.19
• Left needle thread is tight p.19
• Tighten left needle thread yellow p.19
• Left needle thread is loose p.19
• Thread tension p.19
• Left needle thread p.19
• This is the easiest way to obtain the correct p.19
• Following order p.19
• Chart of thread tension adjustment p.19
• Surface p.19
• 4 lowerlooper thread p.19
• Right needle thread is tight p.19
• Thread tension p.20
• 1 needle thread p.20
• This is the easiest way to obtain the correct p.20
• The following order p.20
• Surface p.20
• Order of thread tension adjustment p.20
• One needle three thread p.20
• Needle thread is loose p.20
• Needle thread p.20
• Lowerlooper thread is tight p.20
• Одинарная игла три нити p.20
• Lowerlooper thread is loose p.20
• When you adjust the thread tension do it in p.20
• Lowerlooper thread p.20
• Upperlooper thread is loose p.20
• Loosen upperlooper thread green p.20
• Upperlooper thread p.20
• Loosen needle thread yellow p.20
• Tighten upperlooper thread green p.20
• Loosen lowerlooper thread blue p.20
• Tighten needle thread yellow p.20
• 3 lowerlooper thread p.20
• Tighten lowerlooper thread blue p.20
• 2 upperlooper thread p.20
• Пробное шитье p.21
• Пробная цепочка p.21
• Test sewing p.21
• Chaining off p.21
• Sewing p.22
• Needles and knives p.22
• If threads break during p.22
• Do not leave straight pins in the fabric p.22
• Caution p.22
• Шитья p.22
• Шитье p.22
• То remove work p.22
• Снятие изделия p.22
• Разрыв нити во время p.22
• Начало шитья p.22
• When sewing as they will damage the p.22
• To start sewing p.22
• Presser foot pressure p.23
• Adjusted by turning the pressure adjustment p.23
• Place the material underneath the presser p.23
• 5 standard height for medium material p.23
• Шитье тонких p.23
• O do not lift the presser foot while sewing p.23
• 4 pressure adjustment screw p.23
• Шитье плотных p.23
• No further adjustment is necessary except p.23
• 3 more pressure p.23
• Материалов p.23
• Materials usually when sewing on very light p.23
• 3 dull knives will not cut a clean seam and will p.23
• Лапки p.23
• Materials the presser foot pressure should be p.23
• 2 loosen the thread tension but remember that p.23
• Давление прижимной p.23
• Machine has already been adjusted to a p.23
• 2 less pressure p.23
• When sewing on very heavy or very light p.23
• Loosened when sewing very heavy materials p.23
• 1 adjust the presser foot to prevent the material p.23
• Knives need to be replaced if you notice the p.23
• To sew heavy materials p.23
• If the tension is too loose the thread may p.23
• To sew fine materials p.23
• From puckering and to allow sewing of curves p.23
• The pressure of the presser foot can be p.23
• Foot until it touches the front of the upper p.23
• The presser foot pressure should be tightened p.23
• Fabric puckering while sewing p.23
• Start sewing p.23
• D pressure adjustment screw p.23
• See next page p.23
• Screw at the top left of this machine since this p.23
• Break and stitches may be skipped p.23
• Pressure suitable for light to medium fabrics p.23
• Also cause the fabric to pucker the cutting p.23
• Puckered p.24
• Clockwise to increase the presser foot p.24
• Threads break p.24
• Properly see pages 27 32 thread tension p.24
• Blunt replace with new needle p.24
• Thread tensions are not adjusted p.24
• Pressure p.24
• Thread tension too tight see pages 27 32 thread tension p.24
• Thread tension too tight p.24
• Presser foot pressure too p.24
• Thread tangled check spool pin thread holders etc and p.24
• Needlesbent orneedletipblunt replace with new needle p.24
• Thread correctly p.24
• Needles incorrectly installed install needles correctly p.24
• This sewing machine is designed for trouble fr0e operation however the following chart indicates trouble p.24
• Needles break p.24
• Tangled p.24
• Needle incorrectly installed install needle correctly p.24
• Stitches are not p.24
• Needle bent or needle tip p.24
• Поиск и устранение неисправностей p.24
• Skipped stitches p.24
• Mproper threading or thread p.24
• Wrong needle used use correct needle p.24
• Sewing p.24
• Material pulled forcibly do not press or pull material too hard when p.24
• Which may occur if basic adjustments are not made properly p.24
• See pages 27 32 p.24
• Lightweight or fine material p.24
• Uniform p.24
• See pages 14 24 p.24
• Improper threading thread correctly p.24
• See page 5 p.24
• Fabric is p.24
• Turn the pressure adjustment screw p.24
• Schmetz 130 705h suggested p.24
• Does not feed presser foot pressure too loose p.24
• Trouble cause remedy p.24
• Remove tangled thread p.24
• Decrease thread tension when sewing p.24
• Troubieshooting p.24
• 64 inch p.25
• 4 narrow rolled hemming stitches 2 mm p.25
• 32 inch p.25
• Узкая обметочная p.25
• 3 three thread overlock stitch 2 mm p.25
• Строчка строчка с p.25
• 2 three thread overlock stitch 5 mm p.25
• Подогнутым краем p.25
• 2 narrow rolled hemming stitches 2 mm p.25
• Выбор строчки p.25
• 16 inch p.25
• Use for p.25
• 1 three thread overlock stitch 3 mm p.25
• 1 four thread overlock stitch p.25
• Two needle models p.25
• Stitch selection p.25
• Rolled edge stitch p.25
• One needle models p.25
• Narrow overlock stitch p.25
• Instructions for both narrow overlock rolled p.25
• Edge stitches p.25
• 8 inch p.25
• R position p.26
• Achieve a normal 3 thread overlock stitch p.26
• The edge of the fabric after completing steps 1 p.26
• Press the stitch finger release lever to p.26
• 6 adjust the stitch length p.26
• Tension may vary slightly according to the fabric p.26
• 5 adjust the stitch width for rolled hemming p.26
• T upperlooper p.26
• Position as shown in the illustration this p.26
• Storage for the stitch finger is provided on p.26
• Overlock stitch or rolled edge stitch p.26
• Stitch width lever p.26
• One needle models p.26
• Stitch finger release lever p.26
• Of the hem stitch the lowerlooper tension should p.26
• Stitch finger holder p.26
• Needle plate with stitch finger removed p.26
• Upperlooper thread tension at 1 4 p.26
• Stitch finger p.26
• Move the stitch width lever located on the left p.26
• Two needle models p.26
• Side of the machine toward the front up to the p.26
• Make sure to install stitch finger when sewing p.26
• To do rolled edge stitch p.26
• Set the stitch length adjustment lever to r p.26
• Lowerlooper thread tension at 5 7 p.26
• To do narrow overlock stitch p.26
• Right needle thread tension at 4 p.26
• Front cover p.26
• Through 6 above adjust your machine to these p.26
• Remove the stitch finger p.26
• Causing the edge of the fabric to fold around the p.26
• Through 6 above adjust the thread tension to p.26
• Remaining stitch finger after completing steps 1 p.26
• Be tightened this pulls the upperlooper thread p.26
• Regular overlock stitches p.26
• And thread used p.26
• This is a decorative application used for finishing p.26
• Recommended thread tension settings are p.26
• All thread tensions should be set at 4 p.26
• This application rolls the edge of the fabric inside p.26
• Recommended thread tension settings p.26
• Adjustment is suitable for either narrow p.26
• The inside of the front cover illustrated p.26
• Thread tension p.27
• Lawn organdie p.27
• Stitch width r two needle models p.27
• Georgette lawn p.27
• Stitch style underside of material underside of material p.27
• Georgette p.27
• Stitch length r r p.27
• Fabrics light material p.27
• Stitch finger removed removed p.27
• Decorative thread p.27
• Rolled edge stitch narrow overlock stitch p.27
• Crepe de chine p.27
• R two needle models p.27
• Chart of narrow overlock rolled edge stitch p.27
• R one needle models p.27
• Polyester thread 80 p.27
• Organdie p.27
• Таблица узких обметочных строчек строчек с p.27
• Nylon thread 80 p.27
• Подогнутым краем p.27
• Needle thread nylon thread 80 p.27
• Wooly nylon thread p.27
• Needle thread p.27
• Upperlooper thread wooly nylon thread p.27
• Lowerlooper thread nylon thread 80 p.27
• Upperlooper thread p.27
• Lowerlooper thread p.27
• Top of material top of material p.27
• Light material p.27
• Примеры швейных p.28
• Машины p.28
• Для потайной строчки p.28
• Stitch presser foot p.28
• Serger p.28
• How to change feet p.28
• Features p.28
• Examples of sewing p.28
• Blind stitching with blind p.28
• Applications for this p.28
• Шитье потайной строчки p.28
• С использованием лапки p.28
• Проектов для данной p.28
• Стачивание краев с p.29
• The following are the recommended setting p.29
• Presser foot multi purpose presser foot p.29
• Flatlock stitching with p.29
• Использованием лапки p.29
• The flatlock stitch is primarily used as a p.29
• Piece of the same fabric can be used to do a p.29
• Flat as shown in the illustration p.29
• The fabric is pulled flat either stitch finish can be p.29
• One needle in the left position on two needle p.29
• Fabric guide will go to the right by turning the p.29
• Для потайной строчки p.29
• That some of the stitching loops over the edge p.29
• O when stiching is finished pull the fabric open p.29
• Fabric guide and the thread tension p.29
• With the folded edge in such a way that the p.29
• Test sew on a scrap of the fabric to adjust the p.29
• Needle thread tension slightly slackened p.29
• F lower the presser foot lever adjust the fabric p.29
• With the adjusting screw so that the needle p.29
• Stitch width 5 mm two needle models p.29
• Needle pierces just on the fold p.29
• Decorative finish on a project the finished stitch p.29
• Will decorate the right side when pulled flat if you p.29
• Stitch length 3 4 mm p.29
• Needle path p.29
• Can look like a ladder or small parallel lines when p.29
• While holding the fabric pieces together sew p.29
• Moves down to a position 1 8 inch 2 3 p.29
• By turning the screw forward toward you the p.29
• Used on the right side of the fabric if you sew with p.29
• Slackened p.29
• Models p.29
• Blind stitch presser foot p.29
• Upper looper thread tension slightly p.29
• Sewing test p.29
• Mm one needle models p.29
• At a constant speed down the fold p.29
• Turn the handwheel counter clockwise to set p.29
• Sew with the right sides together the needle p.29
• Mm inside the folded edge of the fabric so p.29
• Adjusting screw p.29
• To adjust the position of the fabric guide a p.29
• Set up the machine for 3 thread overlock with p.29
• Lower looper thread tension slightly p.29
• Adjust the guide position of the presser foot p.29
• Tightened p.29
• Screw backward away from you the fabric p.29
• Lift the presser foot lever and insert the fabric p.29
• 4 fabric guide p.29
• Thread ladder will decorate the right side when p.29
• Reverse p.29
• The wrong sides together the upper looper thread p.29
• Replace the presser foot with a blind stitch p.29
• Guide will go to the left p.29
• The right needle should be removed p.29
• Refer to page 47 p.29
• Guide toward the folded edge p.29
• The needle at its highest position p.29
• Pulled flat p.29
• Fold the fabric as shown in the illustration p.29
• The pin tuck stitch uses a rolled edge to add p.30
• Presser foot multi purpose presser foot p.30
• Fabric up to the needle position p.30
• The needle at its highest position p.30
• Press in place lightly with an iron p.30
• Fabric pencil as guides for pin tuck placement p.30
• The line on the right side of the stitch finger p.30
• Pin tuck stitching with p.30
• Fabric guide and the thread tension p.30
• The following are the recommended setting p.30
• Overlock stitches to produce seams in the form of p.30
• Fabric guide p.30
• The fabric on a line where the pin tuck is to be p.30
• Needle thread tension 0 3 p.30
• Draw equally spaced lines on the fabric with a p.30
• Test sew on a scrap of the fabric to adjust the p.30
• Needle pierces just the folded edge p.30
• Correct minor contractions by hand p.30
• Stitching refer to pages 42 45 p.30
• Mm one needle models p.30
• Contrasting thread in the upper looper adds an p.30
• Шитье строчки с мелкими p.30
• Lower the presser foot lever adjust the fabric p.30
• Continue sewing until all marked lines have p.30
• Складками с использованием p.30
• Stitch width 5 mm two needle models p.30
• Lower looper thread tension 6 9 p.30
• By turning the screw forward toward you the p.30
• Лапки для потайной строчки p.30
• Stitch length 2 4 mm p.30
• Located and guide the fold through the serger p.30
• Blind stitch presser foot p.30
• With the folded edge in such a way that the p.30
• Stitch guide will go to the right by turning the p.30
• Lift the presser foot lever and insert the fabric p.30
• Between the needle and the upper knife p.30
• Use the blind stitch presser foot to make narrow p.30
• Shape and decoration to any sewing project fold p.30
• Guide will goto the left p.30
• Been sewn p.30
• Upper looper thread tension 2 5 p.30
• Set up the machine for narrow overlock p.30
• Align the fold with the guide and insert the p.30
• Turn the handwheel counterclockwise to set p.30
• Screw backward away from you the stitch p.30
• Guide toward the folded edge p.30
• Align the blind stitch presser foot guide with p.30
• Tucks at equal distances from each other p.30
• Reverse p.30
• Guide the fold in the fabric to sew half way p.30
• Adjusting screw p.30
• Thread which will run smoothly p.30
• Replace the presser foot with a blind stitch p.30
• For thin fabrics it s a good idea to choose a fine p.30
• Accent to your project p.30
• This method is not suitable for thin fabrics p.30
• Refer to page 47 p.30
• Fold the fabric along one of the lines and p.30
• Available p.31
• Regular needle plate p.31
• Presser foot ls p.31
• Attractive decorative stitches can be made p.31
• Presser foot lp p.31
• Adjusting screw p.31
• Parts no xb0537001 p.31
• 3 piping presser foot p.31
• Parts no xb0241101 p.31
• 2 pearlsequence presser foot p.31
• Декоративная отделка p.31
• Parts no x76663001 p.31
• 1 tape presser foot p.31
• Upperlooper to produce decorative stitches to p.31
• Other special purpose presser feet that are p.31
• Upperlooper p.31
• On two needle models p.31
• Through different combinations of fabric and p.31
• Making lines p.31
• Thread decorative thread with a high thread p.31
• Make any project more exciting p.31
• Test sew on a scrap of the fabric to adjust the p.31
• For all models lt5 p.31
• Stitch width lever p.31
• Fold in two p.31
• Fabric guide and the thread tension p.31
• Stitch length adjustment lever p.31
• Fabric guide p.31
• Stitch finger release lever p.31
• Decorative stitching p.31
• Stitch finger p.31
• Count or extremely fine thread can be used in the p.31
• Sa212 u s a canada p.31
• Верхний нож и p.32
• Upper knife and p.32
• Retracting upper knife p.32
• Replacing the knives p.32
• Lower knife p.32
• Отвод верхнего ножа p.32
• Нижний нож p.32
• Замена ножей p.32
• Смазка p.33
• Lamp cover p.33
• Illustration p.33
• Подсветки p.33
• For smooth and silent operation the moving pa rt p.33
• Замена лампочки p.33
• For normal use if the machine is used p.33
• The light bulb cover and remove it p.33
• Diagram below p.33
• Take out the light bulb and replace it with a p.33
• Changing the light bulb p.33
• Suggested oiling points p.33
• Changing the light p.33
• Remove the lamp cover as shown in the p.33
• Remarks p.33
• Caution p.33
• Oilthe machine once or twice a month p.33
• Carrying out the following operation p.33
• Oiling p.33
• Be sure to oil your sewing machine before use p.33
• Of the machine should be oiled periodically see p.33
• Apply oil p.33
• New one p.33
• Always clean the lint off your machine before you p.33
• More often oil it once a week p.33
• Always be sure to turn off the power before p.33
• Loosen the lightbulb cover set screw pull up p.33
• Lightbulb p.33
• Light bulb cover p.33
• Машины p.34
• No of needles and threads p.34
• Записи установок p.34
• Needle set schmetz 130 705h p.34
• Two needles or single needle p.34
• Needle bar stroke p.34
• Three four threads convertible p.34
• Needle p.34
• Thread tension p.34
• Models p.34
• Thread p.34
• Mm to 7 mm 5 64 to 9 32 inch two needle p.34
• Stitch width p.34
• Mm to 6 mm 3 16 to 15 64 inch p.34
• Stitch length pitch p.34
• Mm to 4 mm 5 64 to 5 32 inch p.34
• Stitch p.34
• Mm to 3 mm 1 8 to 9 64 inch one needle p.34
• Specifications p.34
• Mm 1 inch p.34
• Sewing speed p.34
• Machine net weight p.34
• Setting record p.34
• Machine p.34
• Light to heavy weight materials p.34
• Schmetz 130 705h p.34
• Free presser type p.34
• Presser foot lift p.34
• Fabric p.34
• Характеристики p.34
• Presser foot p.34
• 300 stitches per minute p.34
• Технические p.34
• On two needle models p.34
• English p.35

Похожие устройства

• 
  Brother 3034 D

  Руководство по эксплуатации
• 
  Brother 1034 D

  Руководство по эксплуатации
• 
  Brother M 1034 D

  Руководство по эксплуатации
• 
  Brother 4234 D

  Руководство по эксплуатации
• 
  Brother HF4000ST Strong&Tough

  Руководство по эксплуатации
• 
  Brother 455 D

  Руководство по эксплуатации
• 
  Brother 1034 D(LE)

  Руководство по эксплуатации
• 
  Brother HF 4000 ST

  Инструкция по эксплуатации
• 
  Brother HF4000ST

  Руководство пользователя
• 
  Brother CV3550

  Руководство пользователя
• 
  Brother CV3440

  Руководство пользователя
• 
  Brother 929D

  Руководство пользователя

Stitch Selection Two needle models This sewing machine can sew five different stitches by following the simple steps below 1 Four thread overlock stitch Use all four threads and two needles for producing four thread overlock stitches Use Ideal for sewing knits and wovens 2 Three thread overlock stitch 5 mm 3 16 inch Use three threads and the left needle producing 5 mm seams which works with all kinds of materials Use For overlock stitching on suits blouses slacks etc NOTE Remove the right needle when sewing this overlock stitch 3 Three thread overlock stitch 2 8 mm 1 8 inch Use three threads and the right needle producing 2 8 mm 1 8 inch seams Use For overlock stitching on suits blouses slacks etc NOTE Remove the left needle when sewing this overlock stitch 4 Narrow rolled hemming stitches 2 0 mm 1 32 inch Use as decorative or finishing stitch Выбор строчки Narrow overlock stitch rolled edge stitch Модели с двойной иглой Используя процедуру описанную ниже на данной швейной машине можно выполнить пять различных видов строчек The Narrow overlock Rolled edge stitche is a decorative finish for lightweight to midweight fabrics It is often used to complete the edge of a fabric This stitch is sewn by removing the left needle and using the 3 thread overlock stitch 1 Обметочная строчка оверлок из четырех нитей Для выполнения обметочной строчки оверлок из четырех нитей используйте все четыре нити и обе иглы Использование Идеально подходит для шитья трикотажной и текстильной ткани 1 Three thread overlock stitch 3 5 mm 9 64 inch Use For overlock stitching on suits blouses slacks etc 2 Narrow rolled hemming stitches 2 0 mm 1 32 inch Use as decorative or finishing stitch легкой ткани и ткани средней плотности Данные строчки часто используются для отделки краев снять с машины левую иглу и использовать обметочную строчку из трех нитей 2 Обметочная строчка оверлок из трех нитей 5 мм Используя три нити и левую иглу можно создать шов шириной 5 мм который подходит к любому типу материала Использование Для обметывания костюмов блуз брюк и т д ПРИМЕЧАНИЕ Перед шитьем данной строчки снимите с машины правую иглу Instructions for both Narrow overlock Rolled edge Stitches 1 Remove the left needle on Two needle models Инструкции по выполнению узких обметочных строчек строчек с подогнутым краем 1 Снимите левую иглу модели с двойной иглой 3 Обметочная строчка оверлок из трех нитей 2 8 мм Используя три нити и правую иглу можно создать шов шириной 2 8 мм Использование Для обметывания костюмов блуз брюк и т д ПРИМЕЧАНИЕ Перед шитьем данной строчки снимите с машины левую иглу 4 Узкая скрученная подогнутая строчка 2 0 мм Используется в качестве декоративной или отделочной строчки 2 It is recommended that a 80 Nylon or Polyester thread be used on the following fabric Georgette Rayon Linen Light Cotton Broad Cloth 2 This sewing machine can sew two different stitches Узкая обметочная строчка строчка с подогнутым краем предназначены для декоративной отделки ткани Для шитья данных строчек необходимо 1 One needle models Узкая обметочная строчка строчка с подогнутым краем Модели с одинарной иглой На данной швейной машине могут быть выполнены два вида строчки 1 Обметочная строчка оверлок из трех нитей 3 5 мм Использование Для обметывания костюмов блуз брюки т д 2 Узкая скрученная подогнутая строчка 2 0 мм Используется в качестве декоративной отделочной строчки или 3 Thread the machine for a three thread overlock using the right needle 4 Remove the stitch finger D Raise the presser foot lever 2 Pull all threads toward the back of the machine Check to make sure that the thread is no longer wrapped around the stitch finger Open the front cover Turn the hand wheel until the upperlooper is at its lowest position 2 Для шитья следующих тканей рекомендуется использовать нейлоновую или полиэфирную нить 80 Жоржет Вискоза Льняная ткань легкая х б ткань Сукно 3 Заправьте нити в машину для выполнения обметочной строчки с использованием трех нитей и правой иглы 4 Удалите штифт регулировки стежка ф Поднимите рычаг прижимной лапки 1 Потяните все нити к задней стороне машины Убедитесь что нить не обведена вокруг штифта регулировки стежка Откройте лицевую крышку Опустите верхний петлитель в крайнее нижнее положение повернув маховик 41 42

Узнайте, как выбрать и использовать различные строчки на швейной машине. Подробные инструкции по обметочным и декоративным строчкам для разных тканей.