Brother M 1034D — настройка швейной машины для обметочных и скрученных строчек [26/35]

Содержание

• When making any other user servicing adjustments mentioned in the instruction manual p.2
• Never operate this sewing machine if it has a damaged cord or plug if it is not working properly if it has p.2
• Do not modify the plug in any way p.2
• Warning p.2
• Never operate the sewing machine with any air openings blocked keep ventilation openings of the p.2
• Do not allow to be used as a toy close attention is necessary when the sewing machine is used by or p.2
• Use this sewing machine only for its intended use as described in this manual use only accessories p.2
• Never drop or insert any object into any openings p.2
• Danger p.2
• To reduce the risk of electric shock p.2
• Near children p.2
• Caution p.2
• To reduce the risk of burns fire electric shock or injury to persons p.2
• Machine from the electrical outlet immediately after using and before cleaning p.2
• Been dropped or damaged or dropped into water return the sewing machine to the nearest p.2
• To disconnect turn the main switch to the symbol o position which represents off then remove plug p.2
• Keep fingers away from all moving parts special care is required around the sewing machine needle p.2
• Authorized dealer or service center for examination repair electrical or mechanical adjustment p.2
• Including the following p.2
• Area such as threading needle changing needle or changing presser foot and the like p.2
• This sewing machine is not intended for use by young children or infirm persons without supervision p.2
• Important safety instructions p.2
• Always use the proper needle plate the wrong plate can cause the needle to break p.2
• This sewing machine is intended for household p.2
• If the plug does not fit fully in the outlet reverse the plug p.2
• Always unplug the sewing machine from the electrical outlet when removing covers lubricating or p.2
• This appliance has a polarized plug one blade wider than the other to reduce p.2
• If it still does not fit contact a qualified electrician to install the proper outlet p.2
• Always unplug before relamping replace bulb with same type rated 15 watts p.2
• Эта швейная машина предназначена только для бытового применения p.2
• The sewing machine should never be left unattended when plugged in always unplug this sewing p.2
• From outlet p.2
• Сохраните это руководство p.2
• The risk of electric shock this plug is intended to fit in a polarized outlet only one way p.2
• Предупреждение p.2
• Switch the sewing machine to the symbol o position when making any adjustments in the needle p.2
• Do not use outdoors p.2
• Инструкции по безопасности p.2
• Sewing machine and foot controller free from the accumulation of lint dust and loose cloth p.2
• Do not use bent needles p.2
• Внимание p.2
• Save these instructions p.2
• Do not unplug by pulling on cord to unplug grasp the plug not the cord p.2
• Young children should be supervised to ensure that they do not play with this sewing machine p.2
• Recommended by the manufacturer as contained in this manual p.2
• Do not pull or push fabric while stitching it may deflect the needle causing it to break p.2
• When using the sewing machine ba ic safety precautions should always be followed p.2
• Read all instructions before using p.2
• Do not operate where aerosol spray products are being used or where oxygen is being administered p.2
• Speed of 300 to 800 stitches per minute for p.3
• It is important to keep fabric and paper away p.3
• Special sintered oil impregnated alloy p.3
• Hours of continuous operation p.3
• Sides of the machine so air can get to these p.3
• From the ventilating holes on the back and p.3
• Замечания о двигателе p.3
• Seen through the ventilating hole in the motor p.3
• Disconnected from the supply by removing the p.3
• When threading the machine replacing a p.3
• Removing covers or changing lamps the p.3
• Continuous operation of the sewing machine p.3
• When the motor is running sparks can be p.3
• Removed from the socket outlet p.3
• Caution p.3
• When servicing the sewing machine or when p.3
• Quite fast compared to the normal operating p.3
• Can cause heat to build in the motor area but p.3
• When leaving this sewing machine p.3
• Plug from the socket outlet p.3
• Brushes and the commutator and are part of p.3
• We recommend disconnecting the electric p.3
• Performance p.3
• Bracket on the side opposite the hand wheel p.3
• Unattended the main switch of the machine p.3
• Notes on the motor p.3
• These sparks are produced by the carbon p.3
• Not enough to adversely affect its p.3
• Needle or when the machine is not in use p.3
• The ordinary foot operated sewing machine p.3
• Must be switched off or the plug must be p.3
• The normal operating speed of this sewing p.3
• Mounted in oil soaked felt to withstand long p.3
• The machines normal operation p.3
• Machine or the electrical set must be p.3
• The bearings in the motor are made of a p.3
• Machine is 1 300 stitches per minute which is p.3
• Supply plug to avoid any possible hazards p.3
• Содержание p.4
• Table of contents p.4
• Presser foot p.5
• Bed extension p.5
• Деталей и их функции p.5
• Needles p.5
• Upperlooper thread tension dial p.5
• Names of parts and p.5
• Upperlooper p.5
• Material slide plate for overlock stitch p.5
• Upper knife p.5
• Material plate cover p.5
• Thread tree p.5
• Thread take up cover p.5
• Main power switch and light switch p.5
• Their functions p.5
• Lowerlooper threading lever p.5
• Stitch width lever p.5
• Lowerlooper thread tension dial p.5
• Stitch length adjustment dial p.5
• Lowerlooper p.5
• Stitch finger p.5
• Left needle thread tension dial p.5
• Spool support p.5
• Knife lever p.5
• Spool stand thread tree support p.5
• Handle p.5
• Spool pin p.5
• Hand wheel p.5
• Right needle thread tension dial p.5
• Front cover p.5
• Presser foot pressure adjustment screw p.5
• Free arm cover p.5
• Наименование p.5
• Presser foot lifting lever p.5
• Differential feed ratio adjustment lever p.5
• Установка снятие лотка p.6
• Принадлежности p.6
• Дополнительные p.6
• Для обрезков p.6
• В комплекте поставки p.6
• With your serger p.6
• Trim trap p.6
• Option p.6
• Installing removing the p.6
• Accessories included p.6
• Wrench and remove the needle p.7
• On two needle models we suggest you hold p.7
• 3 loosen the needle set screw with hexagonal p.7
• Two needle models p.7
• Needle set screw p.7
• 3 hold the needle with its flat side away from p.7
• To remove the needle p.7
• Needle plate glass etc p.7
• 2 turn the hand wheel until the needle bar is at p.7
• To insert the needle p.7
• Needle p.7
• 2 turn the hand wheel counter clockwise by p.7
• Tighten p.7
• Machine needle p.7
• 1 turn the main power switch to the off p.7
• Loosen p.7
• This machine uses a standard home sewing p.7
• Keep this in mind when you loosen the set p.7
• Them both at the same time p.7
• Its highest position p.7
• The two needles with one hand and then insert p.7
• If the needles have been inserted correctly p.7
• The right needle should be set slightly lower p.7
• Hexagonal wrench p.7
• The recommended needle is schmetz 130 p.7
• The needle set screw holds both needles p.7
• Hand until the needle is at its highest position p.7
• Than the left one p.7
• Groove p.7
• Screw to exchange one or both needles p.7
• Flat side p.7
• Position p.7
• Check to see if the space is parallel p.7
• Игла p.7
• Place the needle on its flat side and p.7
• Caution p.7
• You and insert it up as far as it will go p.7
• One needle models p.7
• 4 tighten the needle set screw securely with the p.7
• Начало работы p.8
• Направление вращения p.8
• Крышки p.8
• Закрывание лицевой p.8
• Двигателя p.8
• Включение машины p.8
• Turning direction of p.8
• Preparation p.8
• Powering the machine p.8
• Operation p.8
• Operating p.8
• Opening and closing the p.8
• Main power and sewing light switch p.8
• Front cover p.8
• Открывание и p.8
• Ширина строчки p.9
• Снятие платформы p.9
• Снятие p.9
• Свободный рукав p.9
• Приставки для шитья с p.9
• Платформы приставки p.9
• Использованием функции p.9
• Длина стежка p.9
• Stitch width p.9
• Stitch length p.9
• Removing the bed p.9
• Free arm sewing p.9
• Extension for p.9
• Extension p.9
• The machine the differential feed controls the p.10
• Gathered or p.10
• 1 ___ ___ material is pulled p.10
• The fabric as it is sewn this is effective on p.10
• Function assists in removing the rippling when p.10
• Stretching or p.10
• Front feed dogs move faster than the back feed p.10
• Serging stretch fabrics p.10
• Forward p.10
• Pushed together p.10
• Feed ratio main feed rear differential feed front effect application p.10
• Feed ratio is set at less than 1 the front feed dogs p.10
• Подачи ткани модели с p.10
• Puckering p.10
• Feed adjustment lever p.10
• Подачей ткани p.10
• Prevents thin p.10
• Dogs when set at 1 the feed dogs are moving at p.10
• Использованию p.10
• Prevents stretch p.10
• Dogs gathering the fabric as it is sewn this p.10
• Инструкции по p.10
• On the left side of the machine p.10
• Differential feed ratio is set at greater than 1 the p.10
• Дифференциальной p.10
• Movement of both the front and the rear feed p.10
• Without p.10
• Move slower than the rear feed dogs stretching p.10
• Differential feed normal sewing p.10
• With differential feed p.10
• Mechanism models p.10
• Differential feed p.10
• Under the presser foot to move the fabric through p.10
• Materials from p.10
• 4 to set greater than 1 move the lever p.10
• To adjust the differential feed p.10
• Material is p.10
• 3 to set less than 1 move the lever back p.10
• This serger is equipped with two sets of feed dogs p.10
• Lightweight fabric that may pucker when the p.10
• 2 the normal setting is 1 on the differential p.10
• The same speed ratio of 1 when the differential p.10
• Instructions for the p.10
• 1 locate the differential feed adjustment lever p.10
• Material such as denim do not use the p.11
• Fabric p.11
• Differential feed as it may damage the p.11
• Caution p.11
• Before threading p.11
• Приготовления перед p.11
• Перед заправкой нити p.11
• Заправкой нити p.11
• When threading always thread in this p.11
• When sewing thick non stretchable p.11
• Threading p.11
• Preparation before p.11
• Order upperlooper lowerlooper right p.11
• Needle and then the left needle p.11
• Upperlooper thread lowerlooper thread right p.12
• See fig p.12
• Adapt the net to the shape of the spool see fig p.12
• Upperlooper lowerlooper right needle and p.12
• Release button when threading be sure to p.12
• 3 set the needle bar in its highest position by p.12
• Turning the handwheel toward you p.12
• Q thread tension release button p.12
• 3 release the button p.12
• Turn the handwheel to find the easiest position p.12
• Off the spool p.12
• 2 raise the presser foot using presser foot lever p.12
• Net supplied to prevent the thread from slipping p.12
• 2 pass the thread through the tension disc p.12
• To lift the presser foot lever and also take p.12
• Needle thread and then the left needle thread p.12
• 1 turn off the main power switch for safety p.12
• Перед заправкой нити p.12
• Thread tension discs p.12
• Make sure that the spool notch is on the bottom p.12
• 1 hold the tension release button directly above p.12
• Натяжения p.12
• Thread tension dial p.12
• If you are sewing with loosely spun nylon thread p.12
• Колпачок катушки с нитью p.12
• Thread spool cap p.12
• How to use the thread net p.12
• Кнопка освобождения p.12
• This serger is equipped with a thread tension p.12
• How to use the thread p.12
• Как использовать сетку p.12
• Then the left needle p.12
• Как использовать p.12
• The tension adjustment wheel to the right p.12
• For threading and then thread the p.12
• Для катушки с нитью p.12
• The proper threading order for this serger is p.12
• Correct p.12
• Which is in the channel next to the tension p.12
• Tension release button p.12
• Caution p.12
• When using sewing thread spools the thread p.12
• Spool cap should be used as illustrated below p.12
• Care to thread in the proper order p.12
• When threading the needle always be sure p.12
• Spool cap p.12
• Before threading p.12
• We recommend that you cover the spool with the p.12
• Slide to the right p.12
• Adjustment dial p.12
• Run the thread in the sequence illustrated p.13
• 6 inches through the front of the p.13
• Заправка нити в p.13
• Right and guiding the top toward you p.13
• 6 guide the thread down the channel and p.13
• Верхний петлитель p.13
• Release button to the right then pass p.13
• 4 pass the thread through the proper p.13
• Which is in the channel next to the green p.13
• Points next to the green color marks p.13
• 3 pull the thread about an extra 15cm p.13
• Upperlooper p.13
• Pass the thread through the threading p.13
• 2 pull the thread off the spool and directly p.13
• Up through the thread guide on the p.13
• Next to each threading point p.13
• Threading the p.13
• If the upperlooper thread breaks during p.13
• Thread tree from back to front p.13
• Happens lower the upperlooper by turning the p.13
• Thread tree p.13
• Hand wheel remove the lowerlooper thread from p.13
• Getting caught on the upperlooper if this p.13
• Thread guide p.13
• From at least the tension disc p.13
• This may be caused by the lowerlooper thread p.13
• Following the numerical order in the p.13
• The upperlooper and re thread the upperlooper p.13
• Following the green color and the numbers p.13
• The thread through the tension disc p.13
• D slide and hold the thread tension p.13
• Tension adjustment dial release the p.13
• Button p.13
• T open the front cover by sliding to the p.13
• Sewing p.13
• Accompanying illustration p.13
• Illustrated on page 21 p.14
• 1 slide the lowerlooper threading lever to the p.14
• Threading the p.14
• Re threading is done exactly as diagrammed p.14
• Illustrated p.14
• Thread tree from back to front p.14
• Pull the thread off the spool and directly p.14
• If the lowerlooper thread breaks during p.14
• Thread the needles after the lowerlooper p.14
• Pull the thread about an extra 15cm 6 p.14
• Guide the thread down the channel and p.14
• Thread guide p.14
• Points next to the blue color marks p.14
• The threading is not done in the proper sequence p.14
• Pass the thread through the threading p.14
• Following the numerical order in the p.14
• The thread through the tension disc p.14
• Pass the thread through the proper p.14
• Following the blue color and the numbers next p.14
• The needles before re threading the p.14
• Open the front cover by sliding to the p.14
• Directions shown by the arrow forcefully p.14
• The machine will not operate properly if p.14
• Of the threading lever p.14
• Direction may damage it p.14
• Tension adjustment dial release the p.14
• Moving the threading lever in any other p.14
• Caution p.14
• Slide the threading lever only in the p.14
• Lowerlooper threading lever to the left which p.14
• Button p.14
• Петлитель p.14
• Slide and hold the thread tension p.14
• Lowerlooper threading lever p.14
• And upperlooper have been threaded p.14
• Заправка нити в нижний p.14
• Sewing cut and remove thread from both of p.14
• Lowerlooper make sure that the lowerlooper p.14
• Accompanying illustration up to the p.14
• Which is in the channel next to the blue p.14
• Run the thread in the sequence illustrated p.14
• Lowerlooper easy threading operation p.14
• 5 make sure that the pink triangular marks line p.14
• When sliding the lowerlooper threading p.14
• Right and guiding the top toward you p.14
• Lowerlooper p.14
• 4 holding the end of the thread slide the p.14
• Up through the thread guide on the p.14
• Lever to the left always make sure that the p.14
• 3 place the thread through the eye of the p.14
• Two pink triangular marks line up as p.14
• Returns it to its standard position p.14
• Inches through the front of the thread p.14
• 2 position the thread under the hook left end p.14
• To each threading point p.14
• Release button to the right then pass p.14
• Threading the right p.15
• Needle on two needle p.15
• Thread tree from back to front p.15
• Models p.15
• Thread guide p.15
• Inches through the front of the thread p.15
• The thread through the tension disc p.15
• Guide the thread down the channel and p.15
• Guide 7 above the needle and through p.15
• The right needle from front to back p.15
• Button p.15
• The numerical order in the p.15
• Bring the thread down through the p.15
• Tension adjustment dial release the p.15
• Across through the threading points p.15
• Slide and hold the thread tension p.15
• Accompanying illustration p.15
• Run the thread in the sequence illustrated on p.15
• Release button to the right then pass p.15
• Pull the thread off the spool and directly p.15
• Иглу модели с двойной p.15
• Pull the thread about an extra 15cm 6 p.15
• Иглой p.15
• Pass the thread through the proper p.15
• Заправка нити в правую p.15
• Page 22 following the pink color and the p.15
• Which is in the channel next to the pink p.15
• Numbers next to each threading point p.15
• Up through the thread guide on the p.15
• Next to the pink color marks following p.15
• Иглу p.16
• Pass the thread through the proper p.16
• Заправка нити в левую p.16
• Next to the yellow color marks following p.16
• Which is in the channel next to the yellow p.16
• Next to each threading point p.16
• Up through the thread guide on the p.16
• Inches through the front of the thread p.16
• Threading the left needle p.16
• Guide the thread down the channel and p.16
• Thread tree from back to front p.16
• Guide 7 above the needle and through p.16
• Thread guide p.16
• Following the yellow color and the numbers p.16
• The thread through the tension disc p.16
• Button p.16
• The numerical order in the p.16
• Bring the thread down through the p.16
• The left needle from front to back p.16
• Across through the threading points p.16
• Tension adjustment dial release the p.16
• Accompanying illustration p.16
• Slide and hold the thread tension p.16
• Run the thread in the sequence illustrated p.16
• Release button to the right then pass p.16
• Pull the thread off the spool and directly p.16
• Pull the thread about an extra 15cm 6 p.16
• Polyester 80 p.17
• Material stitch stitch length p.17
• Polyester 50 80 p.17
• Looper thread p.17
• Polyester 30 60 p.17
• Light georgette p.17
• Lawn materials _ organdy p.17
• Сравнительная таблица материалов p.17
• Overlock stitch 3 4 p.17
• Knitted p.17
• Для шитья нитей и игл p.17
• Overlock stitch 2 3 p.17
• Jersey p.17
• Woolly nylon thread p.17
• Organdy p.17
• Hem stitch p.17
• Tricot p.17
• Nylon 80 p.17
• Heavy tweed p.17
• Threads and needles p.17
• Nylon 50 80 p.17
• Gingham p.17
• Spun 80 p.17
• Nylon 30 60 p.17
• Spun 60 80 p.17
• Needle thread p.17
• Decorative thread will work best in the upperlooper for fashion sewing p.17
• Smaller than p.17
• Narrow rolled p.17
• Crepe de chine p.17
• Silk 80 100 p.17
• Mm thread needle p.17
• Cotton 80 100 p.17
• Silk 50 80 p.17
• Medium seersucker p.17
• Cotton 60 80 p.17
• Silk 40 60 p.17
• Materials lawn p.17
• Cotton 40 60 p.17
• Schmetz p.17
• Materials gabardine p.17
• Comparison chart of sewing materials p.17
• Poplin p.17
• Materials denim p.17
• Cashmere p.17
• Tension control p.18
• Green marked tension disc is for p.18
• 4 blue marked tension disc is for p.18
• Standard span 60 3z p.18
• From the left to right p.18
• 2 if you cannot find the correct tension refer to p.18
• Sewing is possible at position 4 for most p.18
• For medium tension p.18
• 1 to select the correct tension refer to the p.18
• Set from 5 to 3 p.18
• For light tension p.18
• Set from 4 to 7 p.18
• For heavy tension p.18
• Set from 4 to 2 p.18
• Each needle thread the lowerlooper thread p.18
• Натяжение нитей p.18
• Seated in the tension discs by holding the p.18
• Different tension setting from the illustration p.18
• Yellow marked tension disc is for left p.18
• Pink marked tension disc is for right p.18
• Dial upto decrease tension p.18
• Upperlooper p.18
• Dial down to increase tension p.18
• Thread used thread tension adjustments may p.18
• Passing the thread through the tension p.18
• Circumstances if improper stitching occurs p.18
• Thread tension may vary according to the type p.18
• On the previous or following pages p.18
• Caution p.18
• Thread tension dial p.18
• Needle p.18
• Be necessary for any change in sewing p.18
• Thread tension p.18
• Materials p.18
• And thickness of the fabric and the type of p.18
• There is a thread tension adjustment dial for p.18
• Make sure that the thread is properly p.18
• And the upperlooper thread the correct p.18
• The illustrations in this case on following p.18
• Lowerlooper p.18
• Tension selection mark p.18
• Illustration on the previous page p.18
• Adjusting the thread tension p.18
• Tension release button to the right while p.18
• If the stitch quality is insufficient select a p.18
• Adjust the tension according to the drawing p.18
• Chart of thread tension adjustment p.19
• Surface p.19
• 4 lowerlooper thread p.19
• Right needle thread is tight p.19
• 3 upperlooper thread p.19
• Right needle thread is loose p.19
• Таблица настройки натяжения нити p.19
• Right needle thread p.19
• 2 right needle thread p.19
• Двойная игла четыре нити p.19
• Order of thread tension adjustment p.19
• 1 left needle thread p.19
• When you adjust the thread tension do it in the p.19
• Lowerlooper thread is tight p.19
• Upperlooper thread is tight p.19
• Lowerlooper thread is loose p.19
• Upperlooper thread is loose p.19
• Lowerlooper thread p.19
• Upperlooper thread p.19
• Loosen upperlooper thread green p.19
• Two needle four thread p.19
• Loosen right needle thread pink p.19
• Tighten upperlooper thread green p.19
• Loosen lowerlooper thread blue p.19
• Tighten right needle thread pink p.19
• Loosen left needle thread yellow p.19
• Tighten lowerlooper thread blue p.19
• Left needle thread is tight p.19
• Left needle thread is loose p.19
• Tighten left needle thread yellow p.19
• Left needle thread p.19
• Thread tension p.19
• Following order p.19
• This is the easiest way to obtain the correct p.19
• Tighten needle thread yellow p.20
• 3 lowerlooper thread p.20
• Tighten lowerlooper thread blue p.20
• 2 upperlooper thread p.20
• Thread tension p.20
• 1 needle thread p.20
• This is the easiest way to obtain the correct p.20
• The following order p.20
• Surface p.20
• Order of thread tension adjustment p.20
• One needle three thread p.20
• Needle thread is loose p.20
• Needle thread p.20
• Lowerlooper thread is tight p.20
• Одинарная игла три нити p.20
• Lowerlooper thread is loose p.20
• When you adjust the thread tension do it in p.20
• Lowerlooper thread p.20
• Upperlooper thread is loose p.20
• Loosen upperlooper thread green p.20
• Upperlooper thread p.20
• Loosen needle thread yellow p.20
• Tighten upperlooper thread green p.20
• Loosen lowerlooper thread blue p.20
• Пробное шитье p.21
• Пробная цепочка p.21
• Test sewing p.21
• Chaining off p.21
• When sewing as they will damage the p.22
• To start sewing p.22
• Sewing p.22
• Needles and knives p.22
• If threads break during p.22
• Do not leave straight pins in the fabric p.22
• Caution p.22
• Шитья p.22
• Шитье p.22
• То remove work p.22
• Снятие изделия p.22
• Разрыв нити во время p.22
• Начало шитья p.22
• Screw at the top left of this machine since this p.23
• Break and stitches may be skipped p.23
• Pressure suitable for light to medium fabrics p.23
• Also cause the fabric to pucker the cutting p.23
• Presser foot pressure p.23
• Adjusted by turning the pressure adjustment p.23
• Place the material underneath the presser p.23
• 5 standard height for medium material p.23
• Шитье тонких p.23
• O do not lift the presser foot while sewing p.23
• 4 pressure adjustment screw p.23
• Шитье плотных p.23
• No further adjustment is necessary except p.23
• 3 more pressure p.23
• Материалов p.23
• Materials usually when sewing on very light p.23
• 3 dull knives will not cut a clean seam and will p.23
• Лапки p.23
• Materials the presser foot pressure should be p.23
• 2 loosen the thread tension but remember that p.23
• Machine has already been adjusted to a p.23
• 2 less pressure p.23
• Давление прижимной p.23
• Loosened when sewing very heavy materials p.23
• 1 adjust the presser foot to prevent the material p.23
• When sewing on very heavy or very light p.23
• Knives need to be replaced if you notice the p.23
• To sew heavy materials p.23
• If the tension is too loose the thread may p.23
• To sew fine materials p.23
• From puckering and to allow sewing of curves p.23
• The pressure of the presser foot can be p.23
• The presser foot pressure should be tightened p.23
• Foot until it touches the front of the upper p.23
• Start sewing p.23
• Fabric puckering while sewing p.23
• See next page p.23
• D pressure adjustment screw p.23
• Schmetz 130 705h suggested p.24
• Does not feed presser foot pressure too loose p.24
• Trouble cause remedy p.24
• Remove tangled thread p.24
• Decrease thread tension when sewing p.24
• Troubieshooting p.24
• Clockwise to increase the presser foot p.24
• Threads break p.24
• Puckered p.24
• Blunt replace with new needle p.24
• Thread tensions are not adjusted p.24
• Properly see pages 27 32 thread tension p.24
• Thread tension too tight see pages 27 32 thread tension p.24
• Pressure p.24
• Thread tension too tight p.24
• Presser foot pressure too p.24
• Thread tangled check spool pin thread holders etc and p.24
• Needlesbent orneedletipblunt replace with new needle p.24
• Thread correctly p.24
• Needles incorrectly installed install needles correctly p.24
• This sewing machine is designed for trouble fr0e operation however the following chart indicates trouble p.24
• Needles break p.24
• Tangled p.24
• Needle incorrectly installed install needle correctly p.24
• Stitches are not p.24
• Needle bent or needle tip p.24
• Поиск и устранение неисправностей p.24
• Skipped stitches p.24
• Mproper threading or thread p.24
• Wrong needle used use correct needle p.24
• Sewing p.24
• Material pulled forcibly do not press or pull material too hard when p.24
• See pages 27 32 p.24
• Lightweight or fine material p.24
• Which may occur if basic adjustments are not made properly p.24
• See pages 14 24 p.24
• Improper threading thread correctly p.24
• Uniform p.24
• See page 5 p.24
• Fabric is p.24
• Turn the pressure adjustment screw p.24
• Edge stitches p.25
• 8 inch p.25
• 64 inch p.25
• 4 narrow rolled hemming stitches 2 mm p.25
• 32 inch p.25
• Узкая обметочная p.25
• 3 three thread overlock stitch 2 mm p.25
• Строчка строчка с p.25
• 2 three thread overlock stitch 5 mm p.25
• 2 narrow rolled hemming stitches 2 mm p.25
• Подогнутым краем p.25
• 16 inch p.25
• Выбор строчки p.25
• 1 three thread overlock stitch 3 mm p.25
• Use for p.25
• 1 four thread overlock stitch p.25
• Two needle models p.25
• Stitch selection p.25
• Rolled edge stitch p.25
• One needle models p.25
• Narrow overlock stitch p.25
• Instructions for both narrow overlock rolled p.25
• Recommended thread tension settings are p.26
• All thread tensions should be set at 4 p.26
• This application rolls the edge of the fabric inside p.26
• Recommended thread tension settings p.26
• Adjustment is suitable for either narrow p.26
• The inside of the front cover illustrated p.26
• Achieve a normal 3 thread overlock stitch p.26
• The edge of the fabric after completing steps 1 p.26
• R position p.26
• 6 adjust the stitch length p.26
• Tension may vary slightly according to the fabric p.26
• Press the stitch finger release lever to p.26
• 5 adjust the stitch width for rolled hemming p.26
• T upperlooper p.26
• Position as shown in the illustration this p.26
• Storage for the stitch finger is provided on p.26
• Overlock stitch or rolled edge stitch p.26
• Stitch width lever p.26
• One needle models p.26
• Stitch finger release lever p.26
• Of the hem stitch the lowerlooper tension should p.26
• Stitch finger holder p.26
• Needle plate with stitch finger removed p.26
• Upperlooper thread tension at 1 4 p.26
• Stitch finger p.26
• Move the stitch width lever located on the left p.26
• Two needle models p.26
• Side of the machine toward the front up to the p.26
• Make sure to install stitch finger when sewing p.26
• To do rolled edge stitch p.26
• Set the stitch length adjustment lever to r p.26
• Lowerlooper thread tension at 5 7 p.26
• Right needle thread tension at 4 p.26
• Front cover p.26
• To do narrow overlock stitch p.26
• Remove the stitch finger p.26
• Causing the edge of the fabric to fold around the p.26
• Through 6 above adjust your machine to these p.26
• Remaining stitch finger after completing steps 1 p.26
• Be tightened this pulls the upperlooper thread p.26
• Through 6 above adjust the thread tension to p.26
• Regular overlock stitches p.26
• And thread used p.26
• This is a decorative application used for finishing p.26
• Upperlooper thread p.27
• Lowerlooper thread p.27
• Top of material top of material p.27
• Light material p.27
• Thread tension p.27
• Lawn organdie p.27
• Stitch width r two needle models p.27
• Georgette lawn p.27
• Stitch style underside of material underside of material p.27
• Georgette p.27
• Stitch length r r p.27
• Fabrics light material p.27
• Stitch finger removed removed p.27
• Decorative thread p.27
• Crepe de chine p.27
• Rolled edge stitch narrow overlock stitch p.27
• Chart of narrow overlock rolled edge stitch p.27
• R two needle models p.27
• R one needle models p.27
• Polyester thread 80 p.27
• Organdie p.27
• Таблица узких обметочных строчек строчек с p.27
• Nylon thread 80 p.27
• Подогнутым краем p.27
• Needle thread nylon thread 80 p.27
• Wooly nylon thread p.27
• Needle thread p.27
• Upperlooper thread wooly nylon thread p.27
• Lowerlooper thread nylon thread 80 p.27
• С использованием лапки p.28
• Проектов для данной p.28
• Примеры швейных p.28
• Машины p.28
• Для потайной строчки p.28
• Stitch presser foot p.28
• Serger p.28
• How to change feet p.28
• Features p.28
• Examples of sewing p.28
• Blind stitching with blind p.28
• Applications for this p.28
• Шитье потайной строчки p.28
• The right needle should be removed p.29
• Refer to page 47 p.29
• Guide toward the folded edge p.29
• The needle at its highest position p.29
• Pulled flat p.29
• Fold the fabric as shown in the illustration p.29
• The following are the recommended setting p.29
• Presser foot multi purpose presser foot p.29
• Flatlock stitching with p.29
• Стачивание краев с p.29
• The flatlock stitch is primarily used as a p.29
• Piece of the same fabric can be used to do a p.29
• Flat as shown in the illustration p.29
• Использованием лапки p.29
• The fabric is pulled flat either stitch finish can be p.29
• One needle in the left position on two needle p.29
• Fabric guide will go to the right by turning the p.29
• Для потайной строчки p.29
• That some of the stitching loops over the edge p.29
• O when stiching is finished pull the fabric open p.29
• Fabric guide and the thread tension p.29
• With the folded edge in such a way that the p.29
• Test sew on a scrap of the fabric to adjust the p.29
• Needle thread tension slightly slackened p.29
• F lower the presser foot lever adjust the fabric p.29
• With the adjusting screw so that the needle p.29
• Needle pierces just on the fold p.29
• Decorative finish on a project the finished stitch p.29
• Will decorate the right side when pulled flat if you p.29
• Stitch width 5 mm two needle models p.29
• Needle path p.29
• Can look like a ladder or small parallel lines when p.29
• While holding the fabric pieces together sew p.29
• Stitch length 3 4 mm p.29
• Moves down to a position 1 8 inch 2 3 p.29
• By turning the screw forward toward you the p.29
• Used on the right side of the fabric if you sew with p.29
• Slackened p.29
• Models p.29
• Blind stitch presser foot p.29
• Upper looper thread tension slightly p.29
• Sewing test p.29
• Mm one needle models p.29
• At a constant speed down the fold p.29
• Turn the handwheel counter clockwise to set p.29
• Sew with the right sides together the needle p.29
• Adjusting screw p.29
• To adjust the position of the fabric guide a p.29
• Set up the machine for 3 thread overlock with p.29
• Mm inside the folded edge of the fabric so p.29
• Adjust the guide position of the presser foot p.29
• Tightened p.29
• Screw backward away from you the fabric p.29
• Lower looper thread tension slightly p.29
• 4 fabric guide p.29
• Thread ladder will decorate the right side when p.29
• Reverse p.29
• Lift the presser foot lever and insert the fabric p.29
• The wrong sides together the upper looper thread p.29
• Replace the presser foot with a blind stitch p.29
• Guide will go to the left p.29
• Adjusting screw p.30
• Thread which will run smoothly p.30
• Replace the presser foot with a blind stitch p.30
• For thin fabrics it s a good idea to choose a fine p.30
• This method is not suitable for thin fabrics p.30
• Refer to page 47 p.30
• Fold the fabric along one of the lines and p.30
• Accent to your project p.30
• The pin tuck stitch uses a rolled edge to add p.30
• Presser foot multi purpose presser foot p.30
• Fabric up to the needle position p.30
• The needle at its highest position p.30
• Press in place lightly with an iron p.30
• Fabric pencil as guides for pin tuck placement p.30
• The line on the right side of the stitch finger p.30
• Pin tuck stitching with p.30
• Fabric guide and the thread tension p.30
• The following are the recommended setting p.30
• Overlock stitches to produce seams in the form of p.30
• Fabric guide p.30
• Needle thread tension 0 3 p.30
• Draw equally spaced lines on the fabric with a p.30
• The fabric on a line where the pin tuck is to be p.30
• Needle pierces just the folded edge p.30
• Correct minor contractions by hand p.30
• Test sew on a scrap of the fabric to adjust the p.30
• Mm one needle models p.30
• Contrasting thread in the upper looper adds an p.30
• Шитье строчки с мелкими p.30
• Stitching refer to pages 42 45 p.30
• Lower the presser foot lever adjust the fabric p.30
• Continue sewing until all marked lines have p.30
• Складками с использованием p.30
• Stitch width 5 mm two needle models p.30
• Lower looper thread tension 6 9 p.30
• By turning the screw forward toward you the p.30
• Лапки для потайной строчки p.30
• Stitch length 2 4 mm p.30
• Located and guide the fold through the serger p.30
• Blind stitch presser foot p.30
• With the folded edge in such a way that the p.30
• Stitch guide will go to the right by turning the p.30
• Between the needle and the upper knife p.30
• Use the blind stitch presser foot to make narrow p.30
• Shape and decoration to any sewing project fold p.30
• Lift the presser foot lever and insert the fabric p.30
• Been sewn p.30
• Upper looper thread tension 2 5 p.30
• Set up the machine for narrow overlock p.30
• Guide will goto the left p.30
• Align the fold with the guide and insert the p.30
• Turn the handwheel counterclockwise to set p.30
• Screw backward away from you the stitch p.30
• Guide toward the folded edge p.30
• Align the blind stitch presser foot guide with p.30
• Tucks at equal distances from each other p.30
• Reverse p.30
• Guide the fold in the fabric to sew half way p.30
• Decorative stitching p.31
• Stitch finger p.31
• Sa212 u s a canada p.31
• Count or extremely fine thread can be used in the p.31
• Regular needle plate p.31
• Available p.31
• Presser foot ls p.31
• Attractive decorative stitches can be made p.31
• Presser foot lp p.31
• Adjusting screw p.31
• Parts no xb0537001 p.31
• 3 piping presser foot p.31
• Parts no xb0241101 p.31
• 2 pearlsequence presser foot p.31
• Декоративная отделка p.31
• Parts no x76663001 p.31
• 1 tape presser foot p.31
• Upperlooper to produce decorative stitches to p.31
• Other special purpose presser feet that are p.31
• Upperlooper p.31
• On two needle models p.31
• Through different combinations of fabric and p.31
• Making lines p.31
• Make any project more exciting p.31
• Thread decorative thread with a high thread p.31
• For all models lt5 p.31
• Test sew on a scrap of the fabric to adjust the p.31
• Fold in two p.31
• Stitch width lever p.31
• Fabric guide and the thread tension p.31
• Stitch length adjustment lever p.31
• Fabric guide p.31
• Stitch finger release lever p.31
• Нижний нож p.32
• Замена ножей p.32
• Верхний нож и p.32
• Upper knife and p.32
• Retracting upper knife p.32
• Replacing the knives p.32
• Lower knife p.32
• Отвод верхнего ножа p.32
• Lightbulb p.33
• Light bulb cover p.33
• Lamp cover p.33
• Смазка p.33
• Illustration p.33
• Подсветки p.33
• For smooth and silent operation the moving pa rt p.33
• Замена лампочки p.33
• For normal use if the machine is used p.33
• The light bulb cover and remove it p.33
• Take out the light bulb and replace it with a p.33
• Diagram below p.33
• Suggested oiling points p.33
• Changing the light bulb p.33
• Remove the lamp cover as shown in the p.33
• Changing the light p.33
• Remarks p.33
• Caution p.33
• Oilthe machine once or twice a month p.33
• Carrying out the following operation p.33
• Oiling p.33
• Be sure to oil your sewing machine before use p.33
• Of the machine should be oiled periodically see p.33
• Apply oil p.33
• New one p.33
• Always clean the lint off your machine before you p.33
• More often oil it once a week p.33
• Always be sure to turn off the power before p.33
• Loosen the lightbulb cover set screw pull up p.33
• Fabric p.34
• Характеристики p.34
• Presser foot p.34
• Технические p.34
• On two needle models p.34
• 300 stitches per minute p.34
• Машины p.34
• No of needles and threads p.34
• Записи установок p.34
• Needle set schmetz 130 705h p.34
• Two needles or single needle p.34
• Needle bar stroke p.34
• Three four threads convertible p.34
• Needle p.34
• Thread tension p.34
• Models p.34
• Thread p.34
• Mm to 7 mm 5 64 to 9 32 inch two needle p.34
• Stitch width p.34
• Mm to 6 mm 3 16 to 15 64 inch p.34
• Stitch length pitch p.34
• Mm to 4 mm 5 64 to 5 32 inch p.34
• Stitch p.34
• Mm to 3 mm 1 8 to 9 64 inch one needle p.34
• Mm 1 inch p.34
• Specifications p.34
• Machine net weight p.34
• Sewing speed p.34
• Machine p.34
• Setting record p.34
• Light to heavy weight materials p.34
• Schmetz 130 705h p.34
• Free presser type p.34
• Presser foot lift p.34
• English p.35

Похожие устройства

• 
  Brother 3034 D

  Руководство по эксплуатации
• 
  Brother 1034 D

  Руководство по эксплуатации
• 
  Brother M 1034 D

  Руководство по эксплуатации
• 
  Brother 4234 D

  Руководство по эксплуатации
• 
  Brother HF4000ST Strong&Tough

  Руководство по эксплуатации
• 
  Brother 455 D

  Руководство по эксплуатации
• 
  Brother 1034 D(LE)

  Руководство по эксплуатации
• 
  Brother HF 4000 ST

  Инструкция по эксплуатации
• 
  Brother HF4000ST

  Руководство пользователя
• 
  Brother CV3550

  Руководство пользователя
• 
  Brother CV3440

  Руководство пользователя
• 
  Brother 929D

  Руководство пользователя

Press the stitch finger release lever to remove the stitch finger Storage for the stitch finger is provided on the inside of the front cover illustrated NOTE Make sure to install stitch finger when sewing regular overlock stitches T Upperlooper Stitch finger Stitch finger release lever Front cover Stitch finger holder Stitch finger Нажмите рычажок освобождения штифта регулировки стежка и снимите штифт Специальное место для хранения штифта находится на внутренней стороне лицевой крышки показано на рисунке 6 Adjust the stitch length Set the stitch length adjustment lever to R position as shown in the illustration This adjustment is suitable for either Narrow Overlock stitch or Rolled Edge stitch 6 Настройте длину стежка Установите регулятор длины стежка в положение R как показано на рисунке Эта установка подходит как для узкой обметочной так и для скрученной подогнутой строчки ПРИМЕЧАНИЕ При выполнении обычных обметочных строчек установите штифт регулировки стежка на место ф Верхний петлитель Штифт регулировки стежка Рычажок освобождения штифта регулировки стежка Лицевая крышка Держатель штифта регулировки стежка Штифт регулировки стежка To Do Rolled Edge Stitch Выполнение скрученной подогнутой строчки This application rolls the edge of the fabric inside of the hem stitch The lowerlooper tension should be tightened This pulls the upperlooper thread causing the edge of the fabric to fold around the remaining stitch finger After completing steps 1 through 6 above adjust your machine to these recommended thread tension settings При применении данной строчки край ткани скручивается и подгибается под шов Натяжение нити в нижнем петлителе следует увеличить При этом нить в верхнем петлителе натягивается а край ткани складывается при помощи штифта регулировки стежка После выполнения шагов 1 6 установите следующие 5 Adjust the stitch width for rolled hemming Move the stitch width lever located on the left side of the machine toward the front up to the R position Stitch width lever Needle plate with stitch finger removed Two needle models One needle models 5 Настройте ширину строчки для выполнения скрученной подогнутой строчки Переключите регулятор ширины строчки Upperlooper thread tension at 1 4 Lowerlooper thread tension at 5 7 Right needle thread tension at 4 Tension may vary slightly according to the fabric and thread used значения натяжения нитей Натяжения нити в верхнем петлителе 1 4 Натяжение нити в нижнем петлителе 5 7 Натяжение нити в правой игле 4 Натяжение может немного варьироваться в находится на левой стороне машины соответствии с типом используемой ткани и ближе к лицевой стороне в положение R нити Регулятор ширины строчки Игольная пластина со снятым штифтом регулировки стежка Модели с двойной иглой Модели с одинарной иглой To Do Narrow Overlock Stitch Выполнение узкой обметочной строчки This is a decorative application used for finishing the edge of the fabric After completing steps 1 through 6 above adjust the thread tension to achieve a normal 3 thread overlock stitch Recommended thread tension settings are Данная строчка используется для декоративных All thread tensions should be set at 4 Tension may vary slightly according to the fabric and thread used значения натяжения нитей целей при отделке краев ткани После выполнения шагов 1 6 установите значения натяжения нитей соответствующие нормальной обметочной строчке из трех нитей Рекомендуется использовать следующие Натяжение всех нитей 4 Натяжение может немного варьироваться в соответствии с типом используемой ткани и нити 43 44

Узнайте, как правильно настроить швейную машину для выполнения обметочных и скрученных подогнутых строчек. Пошаговые инструкции и советы по натяжению нитей.