Brother M 1034D [34/35] No of needles and threads

Содержание

• From outlet p.2
• Сохраните это руководство p.2
• The risk of electric shock this plug is intended to fit in a polarized outlet only one way p.2
• Предупреждение p.2
• Switch the sewing machine to the symbol o position when making any adjustments in the needle p.2
• Do not use outdoors p.2
• Инструкции по безопасности p.2
• Sewing machine and foot controller free from the accumulation of lint dust and loose cloth p.2
• Do not use bent needles p.2
• Внимание p.2
• Save these instructions p.2
• Do not unplug by pulling on cord to unplug grasp the plug not the cord p.2
• Young children should be supervised to ensure that they do not play with this sewing machine p.2
• Recommended by the manufacturer as contained in this manual p.2
• Do not pull or push fabric while stitching it may deflect the needle causing it to break p.2
• When using the sewing machine ba ic safety precautions should always be followed p.2
• Read all instructions before using p.2
• Do not operate where aerosol spray products are being used or where oxygen is being administered p.2
• When making any other user servicing adjustments mentioned in the instruction manual p.2
• Never operate this sewing machine if it has a damaged cord or plug if it is not working properly if it has p.2
• Do not modify the plug in any way p.2
• Warning p.2
• Never operate the sewing machine with any air openings blocked keep ventilation openings of the p.2
• Do not allow to be used as a toy close attention is necessary when the sewing machine is used by or p.2
• Use this sewing machine only for its intended use as described in this manual use only accessories p.2
• Never drop or insert any object into any openings p.2
• Danger p.2
• To reduce the risk of electric shock p.2
• Near children p.2
• Caution p.2
• To reduce the risk of burns fire electric shock or injury to persons p.2
• Machine from the electrical outlet immediately after using and before cleaning p.2
• Been dropped or damaged or dropped into water return the sewing machine to the nearest p.2
• Keep fingers away from all moving parts special care is required around the sewing machine needle p.2
• Authorized dealer or service center for examination repair electrical or mechanical adjustment p.2
• To disconnect turn the main switch to the symbol o position which represents off then remove plug p.2
• Including the following p.2
• Area such as threading needle changing needle or changing presser foot and the like p.2
• This sewing machine is not intended for use by young children or infirm persons without supervision p.2
• Important safety instructions p.2
• Always use the proper needle plate the wrong plate can cause the needle to break p.2
• This sewing machine is intended for household p.2
• If the plug does not fit fully in the outlet reverse the plug p.2
• Always unplug the sewing machine from the electrical outlet when removing covers lubricating or p.2
• This appliance has a polarized plug one blade wider than the other to reduce p.2
• If it still does not fit contact a qualified electrician to install the proper outlet p.2
• Always unplug before relamping replace bulb with same type rated 15 watts p.2
• Эта швейная машина предназначена только для бытового применения p.2
• The sewing machine should never be left unattended when plugged in always unplug this sewing p.2
• Not enough to adversely affect its p.3
• These sparks are produced by the carbon p.3
• Needle or when the machine is not in use p.3
• The ordinary foot operated sewing machine p.3
• Must be switched off or the plug must be p.3
• The normal operating speed of this sewing p.3
• Mounted in oil soaked felt to withstand long p.3
• The machines normal operation p.3
• Machine or the electrical set must be p.3
• The bearings in the motor are made of a p.3
• Machine is 1 300 stitches per minute which is p.3
• Supply plug to avoid any possible hazards p.3
• Speed of 300 to 800 stitches per minute for p.3
• It is important to keep fabric and paper away p.3
• Special sintered oil impregnated alloy p.3
• Hours of continuous operation p.3
• Sides of the machine so air can get to these p.3
• From the ventilating holes on the back and p.3
• Замечания о двигателе p.3
• Seen through the ventilating hole in the motor p.3
• Disconnected from the supply by removing the p.3
• When threading the machine replacing a p.3
• Removing covers or changing lamps the p.3
• Continuous operation of the sewing machine p.3
• When the motor is running sparks can be p.3
• Removed from the socket outlet p.3
• Caution p.3
• When servicing the sewing machine or when p.3
• Quite fast compared to the normal operating p.3
• Can cause heat to build in the motor area but p.3
• When leaving this sewing machine p.3
• Plug from the socket outlet p.3
• Brushes and the commutator and are part of p.3
• We recommend disconnecting the electric p.3
• Performance p.3
• Bracket on the side opposite the hand wheel p.3
• Unattended the main switch of the machine p.3
• Notes on the motor p.3
• Содержание p.4
• Table of contents p.4
• Spool support p.5
• Knife lever p.5
• Spool stand thread tree support p.5
• Handle p.5
• Spool pin p.5
• Hand wheel p.5
• Right needle thread tension dial p.5
• Front cover p.5
• Presser foot pressure adjustment screw p.5
• Free arm cover p.5
• Presser foot lifting lever p.5
• Differential feed ratio adjustment lever p.5
• Наименование p.5
• Presser foot p.5
• Bed extension p.5
• Деталей и их функции p.5
• Needles p.5
• Upperlooper thread tension dial p.5
• Names of parts and p.5
• Upperlooper p.5
• Material slide plate for overlock stitch p.5
• Upper knife p.5
• Material plate cover p.5
• Thread tree p.5
• Thread take up cover p.5
• Main power switch and light switch p.5
• Their functions p.5
• Lowerlooper threading lever p.5
• Stitch width lever p.5
• Lowerlooper thread tension dial p.5
• Stitch length adjustment dial p.5
• Lowerlooper p.5
• Stitch finger p.5
• Left needle thread tension dial p.5
• With your serger p.6
• Trim trap p.6
• Option p.6
• Installing removing the p.6
• Accessories included p.6
• Установка снятие лотка p.6
• Принадлежности p.6
• Дополнительные p.6
• Для обрезков p.6
• В комплекте поставки p.6
• The needle set screw holds both needles p.7
• Hand until the needle is at its highest position p.7
• Than the left one p.7
• Groove p.7
• Screw to exchange one or both needles p.7
• Flat side p.7
• Position p.7
• Check to see if the space is parallel p.7
• Игла p.7
• Place the needle on its flat side and p.7
• Caution p.7
• You and insert it up as far as it will go p.7
• One needle models p.7
• 4 tighten the needle set screw securely with the p.7
• Wrench and remove the needle p.7
• On two needle models we suggest you hold p.7
• 3 loosen the needle set screw with hexagonal p.7
• Two needle models p.7
• Needle set screw p.7
• 3 hold the needle with its flat side away from p.7
• To remove the needle p.7
• Needle plate glass etc p.7
• 2 turn the hand wheel until the needle bar is at p.7
• To insert the needle p.7
• Needle p.7
• 2 turn the hand wheel counter clockwise by p.7
• Machine needle p.7
• 1 turn the main power switch to the off p.7
• Tighten p.7
• Loosen p.7
• This machine uses a standard home sewing p.7
• Keep this in mind when you loosen the set p.7
• Them both at the same time p.7
• Its highest position p.7
• The two needles with one hand and then insert p.7
• If the needles have been inserted correctly p.7
• The right needle should be set slightly lower p.7
• Hexagonal wrench p.7
• The recommended needle is schmetz 130 p.7
• Operating p.8
• Opening and closing the p.8
• Main power and sewing light switch p.8
• Front cover p.8
• Открывание и p.8
• Начало работы p.8
• Направление вращения p.8
• Крышки p.8
• Закрывание лицевой p.8
• Двигателя p.8
• Включение машины p.8
• Turning direction of p.8
• Preparation p.8
• Powering the machine p.8
• Operation p.8
• Stitch length p.9
• Removing the bed p.9
• Free arm sewing p.9
• Extension for p.9
• Extension p.9
• Ширина строчки p.9
• Снятие платформы p.9
• Снятие p.9
• Свободный рукав p.9
• Приставки для шитья с p.9
• Платформы приставки p.9
• Использованием функции p.9
• Длина стежка p.9
• Stitch width p.9
• Without p.10
• Move slower than the rear feed dogs stretching p.10
• Differential feed normal sewing p.10
• With differential feed p.10
• Mechanism models p.10
• Differential feed p.10
• Under the presser foot to move the fabric through p.10
• Materials from p.10
• 4 to set greater than 1 move the lever p.10
• To adjust the differential feed p.10
• Material is p.10
• 3 to set less than 1 move the lever back p.10
• This serger is equipped with two sets of feed dogs p.10
• Lightweight fabric that may pucker when the p.10
• 2 the normal setting is 1 on the differential p.10
• The same speed ratio of 1 when the differential p.10
• Instructions for the p.10
• 1 locate the differential feed adjustment lever p.10
• The machine the differential feed controls the p.10
• Gathered or p.10
• 1 ___ ___ material is pulled p.10
• The fabric as it is sewn this is effective on p.10
• Function assists in removing the rippling when p.10
• Stretching or p.10
• Front feed dogs move faster than the back feed p.10
• Serging stretch fabrics p.10
• Forward p.10
• Feed ratio main feed rear differential feed front effect application p.10
• Pushed together p.10
• Feed ratio is set at less than 1 the front feed dogs p.10
• Подачи ткани модели с p.10
• Puckering p.10
• Feed adjustment lever p.10
• Подачей ткани p.10
• Prevents thin p.10
• Dogs when set at 1 the feed dogs are moving at p.10
• Использованию p.10
• Prevents stretch p.10
• Dogs gathering the fabric as it is sewn this p.10
• Инструкции по p.10
• On the left side of the machine p.10
• Differential feed ratio is set at greater than 1 the p.10
• Дифференциальной p.10
• Movement of both the front and the rear feed p.10
• When threading always thread in this p.11
• When sewing thick non stretchable p.11
• Threading p.11
• Preparation before p.11
• Order upperlooper lowerlooper right p.11
• Needle and then the left needle p.11
• Material such as denim do not use the p.11
• Fabric p.11
• Differential feed as it may damage the p.11
• Caution p.11
• Before threading p.11
• Приготовления перед p.11
• Перед заправкой нити p.11
• Заправкой нити p.11
• Как использовать p.12
• The tension adjustment wheel to the right p.12
• For threading and then thread the p.12
• Для катушки с нитью p.12
• The proper threading order for this serger is p.12
• Correct p.12
• Which is in the channel next to the tension p.12
• Tension release button p.12
• Caution p.12
• When using sewing thread spools the thread p.12
• Spool cap should be used as illustrated below p.12
• Care to thread in the proper order p.12
• When threading the needle always be sure p.12
• Spool cap p.12
• Before threading p.12
• We recommend that you cover the spool with the p.12
• Slide to the right p.12
• Adjustment dial p.12
• Upperlooper thread lowerlooper thread right p.12
• See fig p.12
• Adapt the net to the shape of the spool see fig p.12
• Upperlooper lowerlooper right needle and p.12
• Release button when threading be sure to p.12
• 3 set the needle bar in its highest position by p.12
• Turning the handwheel toward you p.12
• Q thread tension release button p.12
• 3 release the button p.12
• Turn the handwheel to find the easiest position p.12
• Off the spool p.12
• 2 raise the presser foot using presser foot lever p.12
• Net supplied to prevent the thread from slipping p.12
• 2 pass the thread through the tension disc p.12
• To lift the presser foot lever and also take p.12
• Needle thread and then the left needle thread p.12
• 1 turn off the main power switch for safety p.12
• Перед заправкой нити p.12
• Thread tension discs p.12
• Make sure that the spool notch is on the bottom p.12
• 1 hold the tension release button directly above p.12
• Натяжения p.12
• Thread tension dial p.12
• If you are sewing with loosely spun nylon thread p.12
• Колпачок катушки с нитью p.12
• Thread spool cap p.12
• How to use the thread net p.12
• Кнопка освобождения p.12
• This serger is equipped with a thread tension p.12
• Как использовать сетку p.12
• Then the left needle p.12
• How to use the thread p.12
• From at least the tension disc p.13
• This may be caused by the lowerlooper thread p.13
• Following the numerical order in the p.13
• The upperlooper and re thread the upperlooper p.13
• Following the green color and the numbers p.13
• The thread through the tension disc p.13
• D slide and hold the thread tension p.13
• Tension adjustment dial release the p.13
• T open the front cover by sliding to the p.13
• Button p.13
• Sewing p.13
• Accompanying illustration p.13
• Run the thread in the sequence illustrated p.13
• 6 inches through the front of the p.13
• Заправка нити в p.13
• Right and guiding the top toward you p.13
• 6 guide the thread down the channel and p.13
• Верхний петлитель p.13
• Release button to the right then pass p.13
• 4 pass the thread through the proper p.13
• Which is in the channel next to the green p.13
• Points next to the green color marks p.13
• 3 pull the thread about an extra 15cm p.13
• Upperlooper p.13
• Pass the thread through the threading p.13
• 2 pull the thread off the spool and directly p.13
• Up through the thread guide on the p.13
• Next to each threading point p.13
• Threading the p.13
• If the upperlooper thread breaks during p.13
• Thread tree from back to front p.13
• Happens lower the upperlooper by turning the p.13
• Thread tree p.13
• Hand wheel remove the lowerlooper thread from p.13
• Getting caught on the upperlooper if this p.13
• Thread guide p.13
• Slide and hold the thread tension p.14
• Lowerlooper threading lever p.14
• And upperlooper have been threaded p.14
• Заправка нити в нижний p.14
• Sewing cut and remove thread from both of p.14
• Lowerlooper make sure that the lowerlooper p.14
• Accompanying illustration up to the p.14
• Which is in the channel next to the blue p.14
• Run the thread in the sequence illustrated p.14
• Lowerlooper easy threading operation p.14
• 5 make sure that the pink triangular marks line p.14
• When sliding the lowerlooper threading p.14
• Right and guiding the top toward you p.14
• Lowerlooper p.14
• 4 holding the end of the thread slide the p.14
• Up through the thread guide on the p.14
• Lever to the left always make sure that the p.14
• 3 place the thread through the eye of the p.14
• Two pink triangular marks line up as p.14
• Returns it to its standard position p.14
• Inches through the front of the thread p.14
• 2 position the thread under the hook left end p.14
• To each threading point p.14
• Release button to the right then pass p.14
• Illustrated on page 21 p.14
• 1 slide the lowerlooper threading lever to the p.14
• Threading the p.14
• Re threading is done exactly as diagrammed p.14
• Illustrated p.14
• Thread tree from back to front p.14
• Pull the thread off the spool and directly p.14
• If the lowerlooper thread breaks during p.14
• Thread the needles after the lowerlooper p.14
• Pull the thread about an extra 15cm 6 p.14
• Thread guide p.14
• Points next to the blue color marks p.14
• Guide the thread down the channel and p.14
• The threading is not done in the proper sequence p.14
• Pass the thread through the threading p.14
• Following the numerical order in the p.14
• The thread through the tension disc p.14
• Pass the thread through the proper p.14
• Following the blue color and the numbers next p.14
• The needles before re threading the p.14
• Open the front cover by sliding to the p.14
• Directions shown by the arrow forcefully p.14
• The machine will not operate properly if p.14
• Of the threading lever p.14
• Direction may damage it p.14
• Tension adjustment dial release the p.14
• Moving the threading lever in any other p.14
• Caution p.14
• Slide the threading lever only in the p.14
• Lowerlooper threading lever to the left which p.14
• Button p.14
• Петлитель p.14
• Pull the thread off the spool and directly p.15
• Иглу модели с двойной p.15
• Pull the thread about an extra 15cm 6 p.15
• Иглой p.15
• Pass the thread through the proper p.15
• Заправка нити в правую p.15
• Page 22 following the pink color and the p.15
• Which is in the channel next to the pink p.15
• Numbers next to each threading point p.15
• Up through the thread guide on the p.15
• Next to the pink color marks following p.15
• Threading the right p.15
• Needle on two needle p.15
• Thread tree from back to front p.15
• Models p.15
• Thread guide p.15
• Inches through the front of the thread p.15
• Guide the thread down the channel and p.15
• The thread through the tension disc p.15
• Guide 7 above the needle and through p.15
• The right needle from front to back p.15
• Button p.15
• The numerical order in the p.15
• Bring the thread down through the p.15
• Tension adjustment dial release the p.15
• Across through the threading points p.15
• Slide and hold the thread tension p.15
• Accompanying illustration p.15
• Run the thread in the sequence illustrated on p.15
• Release button to the right then pass p.15
• Tension adjustment dial release the p.16
• Accompanying illustration p.16
• Slide and hold the thread tension p.16
• Run the thread in the sequence illustrated p.16
• Release button to the right then pass p.16
• Pull the thread off the spool and directly p.16
• Pull the thread about an extra 15cm 6 p.16
• Иглу p.16
• Pass the thread through the proper p.16
• Заправка нити в левую p.16
• Next to the yellow color marks following p.16
• Which is in the channel next to the yellow p.16
• Next to each threading point p.16
• Up through the thread guide on the p.16
• Inches through the front of the thread p.16
• Threading the left needle p.16
• Guide the thread down the channel and p.16
• Thread tree from back to front p.16
• Guide 7 above the needle and through p.16
• Thread guide p.16
• Following the yellow color and the numbers p.16
• The thread through the tension disc p.16
• Button p.16
• The numerical order in the p.16
• Bring the thread down through the p.16
• The left needle from front to back p.16
• Across through the threading points p.16
• Smaller than p.17
• Narrow rolled p.17
• Crepe de chine p.17
• Silk 80 100 p.17
• Mm thread needle p.17
• Cotton 80 100 p.17
• Silk 50 80 p.17
• Medium seersucker p.17
• Cotton 60 80 p.17
• Silk 40 60 p.17
• Materials lawn p.17
• Cotton 40 60 p.17
• Schmetz p.17
• Materials gabardine p.17
• Comparison chart of sewing materials p.17
• Poplin p.17
• Materials denim p.17
• Cashmere p.17
• Polyester 80 p.17
• Material stitch stitch length p.17
• Polyester 50 80 p.17
• Looper thread p.17
• Polyester 30 60 p.17
• Light georgette p.17
• Lawn materials _ organdy p.17
• Сравнительная таблица материалов p.17
• Overlock stitch 3 4 p.17
• Knitted p.17
• Для шитья нитей и игл p.17
• Overlock stitch 2 3 p.17
• Jersey p.17
• Woolly nylon thread p.17
• Organdy p.17
• Hem stitch p.17
• Tricot p.17
• Nylon 80 p.17
• Heavy tweed p.17
• Threads and needles p.17
• Nylon 50 80 p.17
• Spun 80 p.17
• Nylon 30 60 p.17
• Gingham p.17
• Spun 60 80 p.17
• Needle thread p.17
• Decorative thread will work best in the upperlooper for fashion sewing p.17
• Caution p.18
• Thread tension dial p.18
• Needle p.18
• Be necessary for any change in sewing p.18
• Thread tension p.18
• Materials p.18
• And thickness of the fabric and the type of p.18
• There is a thread tension adjustment dial for p.18
• Make sure that the thread is properly p.18
• The illustrations in this case on following p.18
• Lowerlooper p.18
• And the upperlooper thread the correct p.18
• Tension selection mark p.18
• Illustration on the previous page p.18
• Adjusting the thread tension p.18
• Tension release button to the right while p.18
• If the stitch quality is insufficient select a p.18
• Adjust the tension according to the drawing p.18
• Tension control p.18
• Green marked tension disc is for p.18
• 4 blue marked tension disc is for p.18
• Standard span 60 3z p.18
• From the left to right p.18
• 2 if you cannot find the correct tension refer to p.18
• Sewing is possible at position 4 for most p.18
• For medium tension p.18
• 1 to select the correct tension refer to the p.18
• Set from 5 to 3 p.18
• For light tension p.18
• Set from 4 to 7 p.18
• For heavy tension p.18
• Set from 4 to 2 p.18
• Each needle thread the lowerlooper thread p.18
• Натяжение нитей p.18
• Seated in the tension discs by holding the p.18
• Different tension setting from the illustration p.18
• Yellow marked tension disc is for left p.18
• Pink marked tension disc is for right p.18
• Dial upto decrease tension p.18
• Upperlooper p.18
• Dial down to increase tension p.18
• Thread used thread tension adjustments may p.18
• Passing the thread through the tension p.18
• Circumstances if improper stitching occurs p.18
• Thread tension may vary according to the type p.18
• On the previous or following pages p.18
• Tighten upperlooper thread green p.19
• Loosen lowerlooper thread blue p.19
• Tighten right needle thread pink p.19
• Loosen left needle thread yellow p.19
• Tighten lowerlooper thread blue p.19
• Left needle thread is tight p.19
• Left needle thread is loose p.19
• Tighten left needle thread yellow p.19
• Left needle thread p.19
• Thread tension p.19
• Following order p.19
• This is the easiest way to obtain the correct p.19
• Chart of thread tension adjustment p.19
• Surface p.19
• 4 lowerlooper thread p.19
• Right needle thread is tight p.19
• Right needle thread is loose p.19
• 3 upperlooper thread p.19
• Таблица настройки натяжения нити p.19
• Right needle thread p.19
• 2 right needle thread p.19
• Двойная игла четыре нити p.19
• Order of thread tension adjustment p.19
• 1 left needle thread p.19
• When you adjust the thread tension do it in the p.19
• Lowerlooper thread is tight p.19
• Upperlooper thread is tight p.19
• Lowerlooper thread is loose p.19
• Upperlooper thread is loose p.19
• Lowerlooper thread p.19
• Upperlooper thread p.19
• Loosen upperlooper thread green p.19
• Two needle four thread p.19
• Loosen right needle thread pink p.19
• Lowerlooper thread is tight p.20
• Одинарная игла три нити p.20
• Lowerlooper thread is loose p.20
• When you adjust the thread tension do it in p.20
• Lowerlooper thread p.20
• Upperlooper thread is loose p.20
• Loosen upperlooper thread green p.20
• Upperlooper thread p.20
• Loosen needle thread yellow p.20
• Tighten upperlooper thread green p.20
• Loosen lowerlooper thread blue p.20
• Tighten needle thread yellow p.20
• 3 lowerlooper thread p.20
• Tighten lowerlooper thread blue p.20
• 2 upperlooper thread p.20
• Thread tension p.20
• 1 needle thread p.20
• This is the easiest way to obtain the correct p.20
• The following order p.20
• Surface p.20
• Order of thread tension adjustment p.20
• One needle three thread p.20
• Needle thread is loose p.20
• Needle thread p.20
• Chaining off p.21
• Пробное шитье p.21
• Пробная цепочка p.21
• Test sewing p.21
• Шитья p.22
• Шитье p.22
• То remove work p.22
• Снятие изделия p.22
• Разрыв нити во время p.22
• Начало шитья p.22
• When sewing as they will damage the p.22
• To start sewing p.22
• Sewing p.22
• Needles and knives p.22
• If threads break during p.22
• Do not leave straight pins in the fabric p.22
• Caution p.22
• Knives need to be replaced if you notice the p.23
• To sew heavy materials p.23
• If the tension is too loose the thread may p.23
• To sew fine materials p.23
• From puckering and to allow sewing of curves p.23
• The pressure of the presser foot can be p.23
• The presser foot pressure should be tightened p.23
• Foot until it touches the front of the upper p.23
• Start sewing p.23
• Fabric puckering while sewing p.23
• See next page p.23
• D pressure adjustment screw p.23
• Screw at the top left of this machine since this p.23
• Break and stitches may be skipped p.23
• Pressure suitable for light to medium fabrics p.23
• Also cause the fabric to pucker the cutting p.23
• Presser foot pressure p.23
• Adjusted by turning the pressure adjustment p.23
• Place the material underneath the presser p.23
• 5 standard height for medium material p.23
• Шитье тонких p.23
• O do not lift the presser foot while sewing p.23
• 4 pressure adjustment screw p.23
• Шитье плотных p.23
• No further adjustment is necessary except p.23
• 3 more pressure p.23
• Материалов p.23
• Materials usually when sewing on very light p.23
• 3 dull knives will not cut a clean seam and will p.23
• Materials the presser foot pressure should be p.23
• 2 loosen the thread tension but remember that p.23
• Лапки p.23
• Machine has already been adjusted to a p.23
• 2 less pressure p.23
• Давление прижимной p.23
• Loosened when sewing very heavy materials p.23
• 1 adjust the presser foot to prevent the material p.23
• When sewing on very heavy or very light p.23
• Stitches are not p.24
• Needle bent or needle tip p.24
• Поиск и устранение неисправностей p.24
• Skipped stitches p.24
• Mproper threading or thread p.24
• Sewing p.24
• Material pulled forcibly do not press or pull material too hard when p.24
• Wrong needle used use correct needle p.24
• See pages 27 32 p.24
• Lightweight or fine material p.24
• Which may occur if basic adjustments are not made properly p.24
• See pages 14 24 p.24
• Improper threading thread correctly p.24
• Uniform p.24
• See page 5 p.24
• Fabric is p.24
• Turn the pressure adjustment screw p.24
• Schmetz 130 705h suggested p.24
• Does not feed presser foot pressure too loose p.24
• Trouble cause remedy p.24
• Remove tangled thread p.24
• Decrease thread tension when sewing p.24
• Troubieshooting p.24
• Clockwise to increase the presser foot p.24
• Threads break p.24
• Puckered p.24
• Blunt replace with new needle p.24
• Thread tensions are not adjusted p.24
• Properly see pages 27 32 thread tension p.24
• Thread tension too tight see pages 27 32 thread tension p.24
• Pressure p.24
• Thread tension too tight p.24
• Presser foot pressure too p.24
• Thread tangled check spool pin thread holders etc and p.24
• Needlesbent orneedletipblunt replace with new needle p.24
• Thread correctly p.24
• Needles incorrectly installed install needles correctly p.24
• This sewing machine is designed for trouble fr0e operation however the following chart indicates trouble p.24
• Needles break p.24
• Tangled p.24
• Needle incorrectly installed install needle correctly p.24
• 1 four thread overlock stitch p.25
• Two needle models p.25
• Stitch selection p.25
• Rolled edge stitch p.25
• One needle models p.25
• Narrow overlock stitch p.25
• Instructions for both narrow overlock rolled p.25
• Edge stitches p.25
• 8 inch p.25
• 64 inch p.25
• 4 narrow rolled hemming stitches 2 mm p.25
• 32 inch p.25
• Узкая обметочная p.25
• 3 three thread overlock stitch 2 mm p.25
• Строчка строчка с p.25
• 2 three thread overlock stitch 5 mm p.25
• 2 narrow rolled hemming stitches 2 mm p.25
• Подогнутым краем p.25
• 16 inch p.25
• Выбор строчки p.25
• 1 three thread overlock stitch 3 mm p.25
• Use for p.25
• Two needle models p.26
• Side of the machine toward the front up to the p.26
• Make sure to install stitch finger when sewing p.26
• To do rolled edge stitch p.26
• Set the stitch length adjustment lever to r p.26
• Lowerlooper thread tension at 5 7 p.26
• Right needle thread tension at 4 p.26
• Front cover p.26
• To do narrow overlock stitch p.26
• Remove the stitch finger p.26
• Causing the edge of the fabric to fold around the p.26
• Through 6 above adjust your machine to these p.26
• Remaining stitch finger after completing steps 1 p.26
• Be tightened this pulls the upperlooper thread p.26
• Through 6 above adjust the thread tension to p.26
• Regular overlock stitches p.26
• And thread used p.26
• This is a decorative application used for finishing p.26
• Recommended thread tension settings are p.26
• All thread tensions should be set at 4 p.26
• This application rolls the edge of the fabric inside p.26
• Adjustment is suitable for either narrow p.26
• The inside of the front cover illustrated p.26
• Recommended thread tension settings p.26
• Achieve a normal 3 thread overlock stitch p.26
• The edge of the fabric after completing steps 1 p.26
• R position p.26
• 6 adjust the stitch length p.26
• Tension may vary slightly according to the fabric p.26
• Press the stitch finger release lever to p.26
• 5 adjust the stitch width for rolled hemming p.26
• T upperlooper p.26
• Position as shown in the illustration this p.26
• Storage for the stitch finger is provided on p.26
• Overlock stitch or rolled edge stitch p.26
• Stitch width lever p.26
• One needle models p.26
• Stitch finger release lever p.26
• Of the hem stitch the lowerlooper tension should p.26
• Stitch finger holder p.26
• Needle plate with stitch finger removed p.26
• Upperlooper thread tension at 1 4 p.26
• Stitch finger p.26
• Move the stitch width lever located on the left p.26
• Polyester thread 80 p.27
• Organdie p.27
• Таблица узких обметочных строчек строчек с p.27
• Nylon thread 80 p.27
• Подогнутым краем p.27
• Needle thread nylon thread 80 p.27
• Wooly nylon thread p.27
• Needle thread p.27
• Upperlooper thread wooly nylon thread p.27
• Lowerlooper thread nylon thread 80 p.27
• Upperlooper thread p.27
• Lowerlooper thread p.27
• Top of material top of material p.27
• Light material p.27
• Thread tension p.27
• Lawn organdie p.27
• Stitch width r two needle models p.27
• Georgette lawn p.27
• Stitch style underside of material underside of material p.27
• Georgette p.27
• Stitch length r r p.27
• Fabrics light material p.27
• Stitch finger removed removed p.27
• Decorative thread p.27
• Crepe de chine p.27
• Rolled edge stitch narrow overlock stitch p.27
• Chart of narrow overlock rolled edge stitch p.27
• R two needle models p.27
• R one needle models p.27
• Blind stitching with blind p.28
• Applications for this p.28
• Шитье потайной строчки p.28
• С использованием лапки p.28
• Проектов для данной p.28
• Примеры швейных p.28
• Машины p.28
• Для потайной строчки p.28
• Stitch presser foot p.28
• Serger p.28
• How to change feet p.28
• Features p.28
• Examples of sewing p.28
• Models p.29
• Blind stitch presser foot p.29
• Upper looper thread tension slightly p.29
• Sewing test p.29
• Mm one needle models p.29
• At a constant speed down the fold p.29
• Turn the handwheel counter clockwise to set p.29
• Sew with the right sides together the needle p.29
• Adjusting screw p.29
• To adjust the position of the fabric guide a p.29
• Set up the machine for 3 thread overlock with p.29
• Mm inside the folded edge of the fabric so p.29
• Adjust the guide position of the presser foot p.29
• Tightened p.29
• Screw backward away from you the fabric p.29
• Lower looper thread tension slightly p.29
• 4 fabric guide p.29
• Thread ladder will decorate the right side when p.29
• Reverse p.29
• Lift the presser foot lever and insert the fabric p.29
• The wrong sides together the upper looper thread p.29
• Replace the presser foot with a blind stitch p.29
• Guide will go to the left p.29
• The right needle should be removed p.29
• Refer to page 47 p.29
• Guide toward the folded edge p.29
• The needle at its highest position p.29
• Pulled flat p.29
• Fold the fabric as shown in the illustration p.29
• The following are the recommended setting p.29
• Presser foot multi purpose presser foot p.29
• Flatlock stitching with p.29
• Стачивание краев с p.29
• The flatlock stitch is primarily used as a p.29
• Piece of the same fabric can be used to do a p.29
• Flat as shown in the illustration p.29
• Использованием лапки p.29
• The fabric is pulled flat either stitch finish can be p.29
• One needle in the left position on two needle p.29
• Fabric guide will go to the right by turning the p.29
• Для потайной строчки p.29
• That some of the stitching loops over the edge p.29
• O when stiching is finished pull the fabric open p.29
• Fabric guide and the thread tension p.29
• With the folded edge in such a way that the p.29
• Needle thread tension slightly slackened p.29
• F lower the presser foot lever adjust the fabric p.29
• With the adjusting screw so that the needle p.29
• Test sew on a scrap of the fabric to adjust the p.29
• Needle pierces just on the fold p.29
• Decorative finish on a project the finished stitch p.29
• Will decorate the right side when pulled flat if you p.29
• Stitch width 5 mm two needle models p.29
• Needle path p.29
• Can look like a ladder or small parallel lines when p.29
• While holding the fabric pieces together sew p.29
• Stitch length 3 4 mm p.29
• Moves down to a position 1 8 inch 2 3 p.29
• By turning the screw forward toward you the p.29
• Used on the right side of the fabric if you sew with p.29
• Slackened p.29
• Lower looper thread tension 6 9 p.30
• By turning the screw forward toward you the p.30
• Лапки для потайной строчки p.30
• Stitch length 2 4 mm p.30
• Blind stitch presser foot p.30
• With the folded edge in such a way that the p.30
• Stitch guide will go to the right by turning the p.30
• Located and guide the fold through the serger p.30
• Between the needle and the upper knife p.30
• Use the blind stitch presser foot to make narrow p.30
• Shape and decoration to any sewing project fold p.30
• Lift the presser foot lever and insert the fabric p.30
• Been sewn p.30
• Upper looper thread tension 2 5 p.30
• Set up the machine for narrow overlock p.30
• Guide will goto the left p.30
• Align the fold with the guide and insert the p.30
• Turn the handwheel counterclockwise to set p.30
• Screw backward away from you the stitch p.30
• Guide toward the folded edge p.30
• Align the blind stitch presser foot guide with p.30
• Tucks at equal distances from each other p.30
• Reverse p.30
• Guide the fold in the fabric to sew half way p.30
• Adjusting screw p.30
• Thread which will run smoothly p.30
• Replace the presser foot with a blind stitch p.30
• For thin fabrics it s a good idea to choose a fine p.30
• This method is not suitable for thin fabrics p.30
• Refer to page 47 p.30
• Fold the fabric along one of the lines and p.30
• Accent to your project p.30
• The pin tuck stitch uses a rolled edge to add p.30
• Presser foot multi purpose presser foot p.30
• Fabric up to the needle position p.30
• The needle at its highest position p.30
• Press in place lightly with an iron p.30
• Fabric pencil as guides for pin tuck placement p.30
• The line on the right side of the stitch finger p.30
• Pin tuck stitching with p.30
• Fabric guide and the thread tension p.30
• The following are the recommended setting p.30
• Overlock stitches to produce seams in the form of p.30
• Fabric guide p.30
• Needle thread tension 0 3 p.30
• Draw equally spaced lines on the fabric with a p.30
• The fabric on a line where the pin tuck is to be p.30
• Needle pierces just the folded edge p.30
• Correct minor contractions by hand p.30
• Test sew on a scrap of the fabric to adjust the p.30
• Mm one needle models p.30
• Contrasting thread in the upper looper adds an p.30
• Шитье строчки с мелкими p.30
• Stitching refer to pages 42 45 p.30
• Lower the presser foot lever adjust the fabric p.30
• Continue sewing until all marked lines have p.30
• Складками с использованием p.30
• Stitch width 5 mm two needle models p.30
• Through different combinations of fabric and p.31
• Making lines p.31
• Make any project more exciting p.31
• Thread decorative thread with a high thread p.31
• For all models lt5 p.31
• Test sew on a scrap of the fabric to adjust the p.31
• Fold in two p.31
• Stitch width lever p.31
• Fabric guide and the thread tension p.31
• Stitch length adjustment lever p.31
• Fabric guide p.31
• Stitch finger release lever p.31
• Stitch finger p.31
• Decorative stitching p.31
• Sa212 u s a canada p.31
• Count or extremely fine thread can be used in the p.31
• Regular needle plate p.31
• Available p.31
• Presser foot ls p.31
• Attractive decorative stitches can be made p.31
• Presser foot lp p.31
• Adjusting screw p.31
• Parts no xb0537001 p.31
• 3 piping presser foot p.31
• Parts no xb0241101 p.31
• 2 pearlsequence presser foot p.31
• Декоративная отделка p.31
• Parts no x76663001 p.31
• 1 tape presser foot p.31
• Upperlooper to produce decorative stitches to p.31
• Other special purpose presser feet that are p.31
• Upperlooper p.31
• On two needle models p.31
• Отвод верхнего ножа p.32
• Нижний нож p.32
• Замена ножей p.32
• Верхний нож и p.32
• Upper knife and p.32
• Retracting upper knife p.32
• Replacing the knives p.32
• Lower knife p.32
• Oilthe machine once or twice a month p.33
• Carrying out the following operation p.33
• Oiling p.33
• Be sure to oil your sewing machine before use p.33
• Of the machine should be oiled periodically see p.33
• Apply oil p.33
• New one p.33
• Always clean the lint off your machine before you p.33
• More often oil it once a week p.33
• Always be sure to turn off the power before p.33
• Loosen the lightbulb cover set screw pull up p.33
• Lightbulb p.33
• Light bulb cover p.33
• Lamp cover p.33
• Смазка p.33
• Illustration p.33
• Подсветки p.33
• For smooth and silent operation the moving pa rt p.33
• Замена лампочки p.33
• For normal use if the machine is used p.33
• The light bulb cover and remove it p.33
• Take out the light bulb and replace it with a p.33
• Diagram below p.33
• Suggested oiling points p.33
• Changing the light bulb p.33
• Remove the lamp cover as shown in the p.33
• Changing the light p.33
• Remarks p.33
• Caution p.33
• Stitch p.34
• Mm to 3 mm 1 8 to 9 64 inch one needle p.34
• Mm 1 inch p.34
• Specifications p.34
• Machine net weight p.34
• Sewing speed p.34
• Machine p.34
• Setting record p.34
• Light to heavy weight materials p.34
• Schmetz 130 705h p.34
• Free presser type p.34
• Presser foot lift p.34
• Характеристики p.34
• Presser foot p.34
• Fabric p.34
• Технические p.34
• On two needle models p.34
• 300 stitches per minute p.34
• Машины p.34
• No of needles and threads p.34
• Записи установок p.34
• Needle set schmetz 130 705h p.34
• Two needles or single needle p.34
• Needle bar stroke p.34
• Three four threads convertible p.34
• Needle p.34
• Thread tension p.34
• Models p.34
• Thread p.34
• Mm to 7 mm 5 64 to 9 32 inch two needle p.34
• Stitch width p.34
• Mm to 6 mm 3 16 to 15 64 inch p.34
• Stitch length pitch p.34
• Mm to 4 mm 5 64 to 5 32 inch p.34
• English p.35

Похожие устройства

• 
  Brother 3034 D

  Руководство по эксплуатации
• 
  Brother 1034 D

  Руководство по эксплуатации
• 
  Brother M 1034 D

  Руководство по эксплуатации
• 
  Brother 4234 D

  Руководство по эксплуатации
• 
  Brother HF4000ST Strong&Tough

  Руководство по эксплуатации
• 
  Brother 455 D

  Руководство по эксплуатации
• 
  Brother 1034 D(LE)

  Руководство по эксплуатации
• 
  Brother HF 4000 ST

  Инструкция по эксплуатации
• 
  Brother HF4000ST

  Руководство пользователя
• 
  Brother CV3550

  Руководство пользователя
• 
  Brother CV3440

  Руководство пользователя
• 
  Brother 929D

  Руководство пользователя

Machine Specifications Технические характеристики машины Use Light to heavy weight materials Sewing speed 1 300 stitches per minute Использование 1 300 стежков в минуту 2 3 мм 7 мм модели с двойной иглой Needle bar stroke 25 mm 1 inch Presser foot Free presser type Presser foot lift 5 mm to 6 mm 3 16 to 15 64 inch Needle SCHMETZ 130 705H No of needles and threads Three Four threads convertible Two needles or single needle Machine net weight 7 0 kgs Needle set SCHMETZ 130 705H 80 2 90 2 НАТЯЖЕНИЕ НИТИ FABRIC THREAD NEEDLE МАТЕРИАЛ НИТЬ ИГЛА Ширина строчки 3 0 мм 3 5 мм модели с одинарной иглой Длина стежка 2 мм 4 мм Длина хода иглы 25 мм Прижимная лапка Со свободной лапкой Высота подъема прижимной лапки 5 мм 6 мм Игла SCHMETZ 130 705Н Кол во игл и нитей Три четыре нити преобразуемая Одна или две иглы Вес нетто 7 0 кг Набор игл SCHMETZ 130 705Н 80 2 90 2 on Two needle models для моделей с двойной иглой 59 right upper left needle looper needle правая левая игла Скорость шитья 2 3 mm to 7 mm 5 64 to 9 32 inch Two needle models 3 0 mm to 3 5 mm 1 8 to 9 64 inch One needle models 2 mm to 4 mm 5 64 to 5 32 inch THREAD TENSION От тонких до плотных материалов Stitch width Stitch length pitch SETTING RECORD ЗАПИСИ УСТАНОВОК игла к lowerlooper верхний нижний петли петли тель тель NOTE ПРИМЕЧАНИЕ STITCH TYPE ТИП СТРОЧКИ