D-Link DGS-6604 [1000/1106] Spanning tree transmit hold count

D-Link DGS-6604 [1000/1106] Spanning tree transmit hold count
DGS-6600 Series Switch m spanning-tree transmit hold-count
CLI Reference Guide
990
spanning-tree transmit hold-count
This setting is used to limit the maximum BPDU transmission rate for every port.
spanning-tree transmit-hold-count VALUE
Default VALUE: 6.
Command Mode Global configuration.
Usage Guideline The transmission of BPDU on a port is controlled by a counter. The counter is
incrementally changed on every BPDU transmission, and decremented once
each second. The transmissions are paused for one second, if the counter
reaches the transmit hold count.This parameter will be is used in common by
STP, RSTP, and MSTP.
Changing this parameter to a higher value may have a significant impact on CPU
utilization, especially in MSTP mode. Lowering this parameter could slow
convergence in some scenarios. We recommend that to not change the value
from the default setting.
Example This example shows how to configure the transmit-hold-count value.
Verify the settings by entering the show spanning-tree command.
Syntax Description
VALUE Specifies the value to restrict the numbers of BPDU transmitted on a port within
the Hello Time period. The range is 1 to 10.
Switch(config)# spanning-tree transmit-hold-count 5

Содержание

Скачать