Brother PJ-673 — решение проблем с перегревом и ошибками принтера [62/75]

Chapter 5

NOTE

For errors not described above, see the next chapter, Troubleshooting on page 60.

Head or motor is cooling down The thermal head or motor is too hot.

Head:

If the thermal head becomes too hot, the thermal head may

produce imaging on the paper in areas not intended to be

printed. This phenomenon may occur when printing a large

number of documents with a great deal of text and a high print

density.

To avoid this, the printer will stop, and resume printing after the

print head has cooled down.

To avoid or delay the onset of this condition, print using a lighter

density setting, reduce the amount of black space being printed

(for example, remove background shading and colors in graphs

and presentation documents), and make sure that the printer

has adequate ventilation and is not located in an enclosed

space.

Motor:

Do not use the printer continuously. If the printer is used

continuously, the motor will become too hot. In this case,

the printer will stop and resume printing after the motor has

cooled down.

NOTE

This condition may occur more often when the printer is

used at high altitude (more than 10,000 feet (3,048 m)) due

to a lower air density available to cool the printer.

Data reception error With unstable communication, it may not be possible to receive

data correctly. Improve the communication conditions, and

then establish the connection again.

Printer is in boot mode This issue must be resolved.

Contact your reseller or Brother Customer Service for

assistance.

Problem Solution