![Aurora A-1790D [137/151] Common problems and solutions](/img/pdf.png)
Aurora A-1790D [137/151] Common problems and solutions
![Aurora A-1790D [137/151] Common problems and solutions](/views2/1495536/page137/bg89.png)
Computerized Control System for Square Buttonhole Machine Appendix 1
127
M-064 EEPROM knife parameter error
Press Enter to recover default setting
M-065 Restore all the settings
Are You Sure？Yes：enter No：X
M-066 Restore the selected items
Are You Sure？Yes：enter No：X
M-067 Not select an item
Please select one or several parameters
M-068 Clear running records
Are You Sure？Yes：enter No：X
M-069 Successful
Current operation is successful
M-070 Failed
Current operation is failed
M-071
Current cyclic sewing pattern is empty or the
quoted continuous sewing pattern is empty
Edit again
M-072 Initialize U disk
Press Enter to perform operation; Press ESC to quit.
The initialization will delete all the files in U disk
M-073 Initialize memory
Press Enter to perform operation; Press ESC to quit.
The initialization will delete all the files in memory
M-074 Please turn off machine
Current operation is finished, please restart machine
M-075 Parameter restoration successful
Parameter restoration successful, please restart
machine
M-076 Fail to open file
Fail to open file
M-077 Not select update item
Please select at least one item for update
M-078 Selected item for update is not existed
If the item has no update file, the system will cancel
the selection. If user wants to update the rest, please
confirm again
M-079 Update successful
Update successful, please restart machine
M-080 Copy failed, please check memory room
Check the room of memory
M-081 Copy failed, please check U Disk
Check whether the U disk is pulled out
M-082 File I/O error
File I/O error
M-083 Verification failed at updating main software
M-084 Can not delete pattern data
The selected sewing data is in use
M-085 Perform parameter transfer
Are You Sure？Yes：enter No：X
M-086 Can not open changed pattern
Please confirm pattern file
M-087 Changed pattern format error
Please confirm pattern file
M-088 Changed pattern data is too long
Please confirm pattern file
M-089 Pattern-designing data error
EPD parameter is abnormal
M-090 Can not change counter
At changing, please turn off the setting
M-091 Verification failed at updating main software
10.3 Common Problems and Solutions
No. Name Solutions and Steps
E-004 Main voltage too low
1、 Check the input voltage. Make sure it is stable
2、 Check the working condition of main motor
E-005 Main voltage too high
E-007 IPM over-voltage or
over-current
Содержание
- Sc500 1790 p.1
- Version 2013 01 p.1
- Computerized control system for square buttonhole machine p.1
- Forewords p.3
- Safety matters for attention p.5
- Installation p.5
- Safety matters for attention computerized control system for square buttonhole machine p.6
- Maintenance inspection p.6
- Before checking adjusting and repair any air driven equipment user needs cut off the source of gas and wait for the pressure indicator drop to 0 p.6
- Sewing p.6
- Table of content p.7
- General information p.11
- General p.11
- Function and specification p.11
- Working environment p.12
- Standardization p.12
- Matters for safe using p.12
- Installation p.12
- Warning and danger p.13
- Others p.13
- Maintenance inspection and repair p.13
- Abandonment p.13
- Warning p.14
- The preventions on instruction p.14
- Operation method p.15
- Sewing list p.16
- Threading needle thread p.17
- Preparation before sewing p.17
- Needles p.17
- Installation of needle p.17
- In order to avoid the personal injury caused by the sudden start of machine user has to turn off power and make sure the motor stops before performing the following operation p.17
- Do turn off power when you install p.17
- Installation of bobbin p.18
- In order to avoid the personal injury caused by the sudden start of machine user has to turn off power and make sure the motor stops before performing the following operation p.18
- If the bobbin is not in the proper position the shuttle core will move at sewing and thread will be wound to shaft the shape of standard shuttle is different from that of non oil shuttle they cannot be used in common p.18
- Threading at bobbin p.19
- In straight buttonhole sewing is different from that of zigzag buttonhole p.19
- In order to avoid the personal injury caused by the sudden start of machine user has to turn off power and make sure the motor stops before performing the following operation p.19
- Attention the threading method at slot p.19
- Adjustment of bobbin thread tension p.19
- After adjusting the bobbin thread tension user also needs to check the needle thread tension in the sewing parameters p.20
- When the chemical thread is used please decrease the tension slightly increase the tension when the cotton thread is used p.20
- Installation of knife p.20
- In order to avoid the personal injury caused by the sudden start of machine user has to turn off power and make sure the motor stops before performing the following operation p.20
- Method for adding oil p.22
- In order to avoid the personal injury caused by the sudden start of machine user has to turn off power and make sure the motor stops before performing the following operation p.22
- Operating instruction p.23
- Name an p.23
- Description of each part p.23
- Reset release the error p.24
- Operating instruction computerized control system for square buttonhole machine p.24
- Number input display the number keyboard and input the number p.24
- Minus decrease the value p.24
- First make sure that the set presser type a is the same as that of the presser actually installed p.24
- Esc quit the current interface at data change interface it is for cancelling the change of data p.24
- Enter confirm the changed data p.24
- Common buttons p.24
- Basic operation p.24
- ② select the wanted pattern no p.24
- ① turn on the power p.24
- When the power is on the data input screen is displayed pattern no button b which is marked at present is displayed in the upper section of the screen press button b to select the pattern no the unregistered pattern no will not be displayed p.24
- The buttons for the common operation in each interface are shown at below p.24
- Plus increase the value p.24
- Operation of normal pattern p.25
- Operation of continuous sewing p.27
- Operation of cyclic sewing p.29
- Normal pattern sewing p.32
- Function keys p.32
- Pattern registration p.35
- Pattern copy p.37
- Threading p.38
- Pattern naming p.38
- Winding p.39
- Select the type of presser p.40
- Pattern selection p.41
- Sewing shape selection p.42
- Sewing data setting p.44
- Trial sewing p.52
- Direct selection of pattern p.52
- Set needle thread tension p.54
- Operation of counter p.55
- In case of the radial eyelet shape set the bar tacking tension to approximately 120 and make the balance of stitches p.55
- Emergency stop p.56
- Vdt pattern operation p.57
- Display and operation of vdt pattern p.57
- Sewing data of vdt pattern p.58
- Function list p.59
- Continuous sewing p.59
- Edition of continuous sewing p.60
- Selection of continuous sewing pattern p.60
- Edition of continuous sewing pattern p.60
- Continuous sewing pattern registration p.63
- Continuous sewing pattern copy p.64
- Deletion of continuous sewing pattern p.65
- Function list p.68
- Continuous sewing interface p.68
- Trial sewing for continuous sewing p.69
- Function list p.72
- Cyclic sewing p.72
- Pattern registration p.73
- Edition of cyclic sewing p.73
- Pattern copy p.74
- Selection of cyclic sewing pattern p.75
- Edition of cyclic sewing pattern p.75
- Change fabric p.77
- Function list p.78
- Cyclic sewing interface p.78
- Trial sewing at cyclic sewing p.80
- Mode setting p.82
- Function list p.83
- Level 1 parameter setting p.84
- Level 2 parameters setting p.88
- Counter setting p.91
- Functions p.92
- Settings on user management p.93
- Edition of sewing data p.94
- Register pattern to direct button p.95
- Change sewing mode p.95
- Test mode p.97
- 1 adjustment of needle thread trimming p.97
- 2 adjustment of down thread trimmer p.98
- 3 input signal test method p.98
- 4 inspection of lcd display p.99
- 6 output inspection p.100
- 5 correction of touching panel p.100
- 8 continuous running p.101
- 7 speed test p.101
- Operation of keyboard lock p.102
- Brightness adjustment p.102
- Initialization p.104
- Parameter back up restoration p.106
- Operations p.108
- Communication p.108
- About the available data p.108
- Pattern transfer p.109
- Parameter transfer p.111
- Software update p.112
- Information p.114
- Check the maintenance information p.114
- Set the maintenance time p.116
- Method to release the warning p.117
- Via information interface p.118
- Information of production control p.118
- Via sewing interface p.119
- Setting of production control information p.120
- Threading figure p.123
- Warning record p.124
- Running record p.125
- Setting of periodical password p.126
- Warning list p.134
- Appendix 1 p.134
- Hint list p.135
- Common problems and solutions p.137
- Default values of sewing shapes p.140
- Installation size of control box p.149
- Appendix 2 p.149
- Installation size of operation panel p.150
- System diagram p.151
Похожие устройства
-
Aurora А-782DИнструкция к блоку управления -
Aurora А-782DИнструкция по эксплуатации -
Aurora А-781DИнструкция к блоку управления
-
Aurora А-781DИнструкция по эксплуатации
-
Aurora A-9820Руководство по эксплуатации -
Aurora A-1790DРуководство по эксплуатации -
Aurora A-783DИнструкция к блоку управления
-
Aurora A-783DИнструкция по эксплуатации
-
Aurora A-782DИнструкция по эксплуатации -
Aurora A-782DИнструкция к блоку управления -
Aurora A-781DИнструкция к блоку управления -
Aurora A-781DИнструкция по эксплуатации