Gigabyte MZ32-AR0 (rev. 1.0) Руководство пользователя GIGABYTE Management Console _AMI_ онлайн [88/134] 534551

Gigabyte Server Management Console - 88 -

5. Enable or Disable the Enable User Access Privilege.

Note: Enabling User Access will intern assign the IPMI messaging privilege to user.

It is recommended that the IPMI messaging option should be enabled for the user to

enable the User Access option, while creating User through IPMI.

6. IntheNetworkPrivilegeandSerialPrevilegeelds,selecttheprivilegesassignedtothe

user which could be Administrator, Operator, User, OEM or None.

7. Check KVM Access to assign the KVM privilege for the user.

8. Check VMedia Access assign the VMedia privilege for the user.

Note: It is recommended that the privileges support to KVM and VMedia should be

provided only to the ADMIN user and shouldn't be provided to USER and OPERATOR

privilege level users. The Admin user can provide the privilege support to USER and

OPERATOR privilege level users at their own risk.

VMedia Privilege only restricts initiating / starting media redirection. If a device is already

being redirected and attached to the host, then in host it will be visible as normal device.

Hence, it will be accessible to all the KVM sessions, which includes ‘KVM Privilege only’

sessions as well.

9. Check the SNMP Access check box to enable SNMP access for the user.

Note: Passwordeldismandatory,ifSNMPStatusisenabled.

10. Choose the SNMP Access level option for user from the SNMP Access level (SHA or

MD5) drop-down list. Either it can be Read Only or Read Write.

11. Choose the SNMP Authentication Protocol (SHA or MD5) to use for SNMP settings

from the drop down list.

Note: Passwordeldismandatory,ifAuthenticationprotocolischanged.

12. Choose the Encryption algorithm to use for SNMP settings from the SNMP Privacy

protocol (AES or DES) drop-down list.

13. In the Email ID eld,entertheemailIDoftheuser.Iftheuserforgetsthepassword,the

newpasswordwillbemailedtotheconguredemailaddress.

Note: SMTPServermustbeconguredtosendemails.

Email Format: Two types of formats are available:

• AMI-Format: The subject of this mail format is ‘Alert from (your Host name)’. The

mail content shows sensor information, ex: Sensor type and Description.

• Fixed-Subject Format: This format displays the message according to user's

setting. You must set the subject and message for email alert.

14. In the Upload SSH Keyeld,clickBrowseandselecttheSSHkeyle.

Note: SSHkeyleshouldbeofpubtype.

15. Click Save to save the new user and return to the users list.