Beon BN-1201 [6/9] Operation of the device
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Beon BN-1201 [6/9] Operation of the device

Beon BN-1201 [6/9] Operation of the device
6 INSTRUCTION MANUAL
OPERATION OF THE DEVICE
After transporting or storing the device at a reduced temperature, it must be kept at room
temperature for at least three hours.
Connect the device to an electrical outlet for mains operation or to recharge the battery.
Place the product on a flat surface and straighten all the folds.
Remove the protective cover from the device.
Turn the device on with the switch (3), remove the spools from the product in a Circular
motion. Do not press the device hard against the fabric, as this may damage the fabric or mesh.
All removed spools are collected in the compartment (2).
CLEANING AND MAINTENANCE
Unscrew the mesh (4) by rotating it counterclockwise. Carefully remove the blades. Remove
any accumulated dust. Replace the blades and the metal mesh by twisting it clockwise until it
stops.
Make sure that the spool collection compartment (2) is never completely clogged.
Always disconnect the appliance from the power supply before cleaning.
Wipe the exterior surfaces with a damp cloth.
Check the condition of the knives and the mesh by lightly pressing the mesh to make sure that
there is a sufficient gap between the knife and the mesh.
Before turning on the device, make sure that the external surface and electrical contacts are
completely dry.
Keep the device out of the reach of children and people with disabilities.
CAUTION!
The supplier reserves the right to change the appearance and configuration of the device without notifying the
buyer.
The device's service life is 3 years.
The date of manufacture is indicated on the packaging or on the product itself.
CAUTION! In order to protect the environment, after the end of the service life of the device and batteries
(if included in the kit), do not throw them away together with ordinary household waste, transfer the device
and batteries to specialized points for further disposal.
Waste generated during the disposal of products is subject to mandatory collection and subsequent disposal in
accordance with the established procedure. For more information about recycling this product, contact your local
municipality, the household waste disposal service, or the store where you purchased this product.
This product meets all the required European and Russian safety and hygiene standards.
DELIVERY SET
Spool removal machine – 1 pcs.
Cleaning brush – 1 pcs.
Power cord – 1 pcs.
Manual – 1 pcs.
TECHNICAL CHARACTERISTICS
BN-1201
Power: 3 W
Power supply: 220 V ~ 50 Hz
Working surface diameter: 5 cm
Charging time: 8 hours
Battery lifetime without charging: 30 min.
Cord length: 60 cm

Содержание

Похожие устройства

Скачать