Stiga Combi 48 Q Руководство по эксплуатации онлайн [79/246] 768569

Stiga Combi 48 Q Руководство по эксплуатации онлайн [79/246] 768569
EN - 5
1. Start the machine
(par. 6.3).
2. Operate the drive
lever.
3. Disengage the drive
lever.
2. 
move the machine

3. 
stop and the machine

Test driving No abnormal vibrations.
No abnormal sound.
If any of the results fail to match the indications
provided in the tables, do not use the machine! Contact
an Authorised Service Centre to have it checked and
repaired if necessary.
6.3 START-UP
NOTE Start up the machine on a at surface without ob-
stacles or high grass.
6.3.1 Models with manual start handgrip
Fig.17.A /B)
NOTE The engine brake lever / cutting means must be
kept pulled to prevent the engine stop.
6.3.2 Models with push-button electric start
command Fig.18.A/B/C/D)
NOTE The engine brake / cutting means lever must be
kept pulled to prevent the engine stop.
6.4 OPERATION
IMPORTANT When working, always keep a safe dis-
tance from the cutting means, given by the length of the
handle.
6.4.1 Grass cutting
1. 
2. Adjust the speed and cutting height (par. 5.5) in relation

and the amount of grass to be cut.
3. 

For mulching or rear grass discharge:
Never cut more than one third of the total grass height
per single pass (Fig.19).
Keep the chassis clean (par. 7.4.2).
For side discharge: avoid discharging the cut grass

6.4.2 Grass catcher emptying
For grass catcher with contents indicator device:
 
that the grass catcher is full and must be emptied.
:
1. Wait until the cutting means stops (Fig.21.A);
2. remove the grass catcher (Fig.21.B/C/D).
6.5 STOP Fig.22.A)
After having stopped the machine, it will take a few
seconds for the cutting means to stop.
Do not touch the engine after stopping it. Risk of
burns.
IMPORTANT Always stop the machine.
When moving between work areas.
When driving on grass free surfaces.
Close to an obstacle.
Before adjusting the cutting height.
Any time the grass catcher is removed or retted.
Any time the side discharge chute (if available) is re-
moved or retted.
6.6 AFTER USE Fig.23.A/B/C/D)
1. Clean (par. 7.4).
2. -

IMPORTANT Any time the machine is inactive or unat-
tended:
Remove the spark plug cap (for models with manual start
handgrip)(Fig.23.B/C).
Press the tab and remove the permission key (for models
with push-button electric start) (Fig.23.D).
7. MAINTENANCE
7.1 GENERAL INFORMATION
The safety regulations to follow are described in
chap. 2. Strictly comply with these instructions to avoid
serious risks or hazards:
Before commencing any inspections, cleaning or
maintenance/adjustments on the machine:
Stop the machine.
Make sure that any moving component has stopped.
Wait until the engine cools down.
Remove the spark plug cap (Fig. 23.B).
Remove the key (Fig.23.D) (for models with
push-button electric start).
Read the relevant instructions.
Use suitable clothing, protective gloves and gog-
gles.
7.2 ROUTINE MAINTENANCE

in the "Maintenance Table" (chapter 10).
IMPORTANT Any maintenance and adjustment opera-
tions not described in this manual must be carried out by
your Authorised Service Centre.
7.2.1 Refuelling
Place the machine in a stable horizontal position on the
ground.
Refuelling must be performed with the machine
stopped and with the spark plug cap removed.



Содержание

Скачать