Texas Benzin kantsk?rer EC2600 Инструкция по эксплуатации онлайн [17/42] 770495

www.texas.dk

7. Adjustment of cutting height

8. Edge guide

The cutting height has 3 positions: 10, 20, and 30 mm.

To adjust the height turn the adjustment knob 5-6 full turns.

It should not be removed.

Press the knob towards the machine and at the same time

move the front wheel to the other side. Lift or lower the arm

to the new position.

Pull the knob back out and tighten when the arm is in the

correct position.

The edge guide is used when working against solid material like

a paved surface to prevent the blade from being damaged

against the hard surface.

Press the handle to the side (towards the centre of the ma-

chine) and then downwards. Then press it to the side again.

The edge guide is now active.

When the edge guide lever is up the edge guide is not in use.