Miele SBCD3 Classic C1 Allergy Руководство по эксплуатации онлайн [45/56] 772486
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Miele SBCD3 Classic C1 Allergy Руководство по эксплуатации онлайн [45/56] 772486

Miele SBCD3 Classic C1 Allergy Руководство по эксплуатации онлайн [45/56] 772486
en
45
However, if the cleaner has been used
to vacuum up fine dust, such as plaster,
brick dust, cement or flour, the pores of
the dustbag will become blocked very
quickly.
This affects the air permeability of the
bag, and the marker will indicate that
the bag is “full” even when it is not. The
dustbag must be replaced if this is the
case.
If, on the other hand, a large amount of
hair and carpet fluff which typically con-
tains a lot of air is vacuumed up, the in-
dicator may fail to react even though
the bag is full. You should still change it.
Both these extremes can occur.
How to replace the dustbag (dia. 25)
Press both release buttons at the side
of the hose connector, and lift the
hose from the socket (dia. 01).
Pull the release catch upwards and
open the dust compartment lid as far
as it will go(dia. 08).
The dustbag has a flap which closes
automatically when the dust compart-
ment lid is raised to prevent any dust
escaping.
Pull the dustbag out by the grip on
the collar.
Fit the new dustbag into the holder
as far as it will go. Leave it folded up
when you take it out of the box.
Close the dust compartment lid se-
curely, making sure it clicks into posi-
tion. Take care not to trap the dust-
bag when doing so.
A safety device prevents the lid clos-
ing without a dustbag in place. Do
not use force!
Insert the hose connector into the
suction socket on the vacuum
cleaner until it clicks into posi-
tion(dia. 01).
When to change the motor protection
filter
Replace this filter every time you start a
new packet of dustbags.
Every packet of original Miele dustbags
contains a motor protection filter. Mul-
tipacks contain four motor protection
filters (only available in selected coun-
tries).
How to change the motor protection
filter (dia. 26)
Open the dust compartment lid.
Pull the dustbag out by the grip on
the collar.
Unclip the filter frame and replace the
motor protection filter.
Close the filter frame.
Fit the dustbag into the holder as far
as it will go.
Close the dust compartment lid.
When to replace the exhaust filter
AirClean
Replace this filter every time you start a
new packet of Miele dustbags. Every
packet of original Miele dustbags con-
tains one AirClean exhaust filter. Mul-
tipacks contain four AirClean filters
(only available in selected countries).

Содержание

Похожие устройства

Скачать