Home
Главная
Stadler Form
Колонный вентилятор
Peter P-013
Руководство по эксплуатации Страница: 6

Stadler Form Peter P-013 Руководство по эксплуатации онлайн [6/52] 772839

• Only connect the cable to alternating current. Observe the voltage infor-

mation given on the appliance.

• Do not use damaged extension cords.

• Do not run the power cord over sharp edges and make sure that it does

not get trapped.

• Do not pull the plug from the socket with wet hands or by holding on to

the power cord.

• Do not use the appliance in immediate vicinity of a bath tub, a shower or a

swimming pool (observe a minimum distance of 3 m). Place the appliance

such that a person in the bath tub cannot touch the appliance.

• Do not place the appliance near a heat source. Do not subject the power

cord to direct heat (such as a heated hotplate, open flames, hot iron sole

plates or heaters for example). Protect power cords from oil.

• See to it that the appliance is properly positioned to ensure a high stabil-

ity during its operation and make sure that no one can trip over the power

cord.

• The appliance is not splash-proof.

• For indoor use only.

• Do not store the appliance outdoors.

• Store the appliance in a dry place inaccessible to children (pack the ap-

pliance).

• If the supply cord is damaged, it must be replaced by the manufacturer, or

its service agent, or a qualified person in order to avoid a hazard.

• Prior to any maintenance, cleaning and after each use, switch off the ap-

pliance and unplug the mains cable from the socket.

• Repairs to electrical appliances must only be carried out by a qualified

electrical technician.

Assembly (see page 2 and 3)

Attach the foot (1) to the bottom of the housing (2) with the 4 screws pro-

vided. Make sure the screws are firmly tightened.

Setting up / operation

1. Place Peter in the desired location on a flat surface. Connect the mains

cable (3) to a suitable power outlet.

2. Switch on the appliance by pressing the on/off button (4). The blue LEDs

on the control panel (5) will then turn on. The appliance gives an audible

signal when a setting is changed via the control panel (5) or the remote

control (11).

3. Press the button for the selection of the speed level (6) to change the

fan speed (levels 1–3). Pressing once increases the speed by one level.

If you would like to increase the speed by another level, press again. The

number of the selected speed level (7) lights up on the front of the unit,

and disappears after 5 seconds.

4. Press the button for the selection of “Natural Breeze” mode (8) for natu-

ral wind conditions. The blue LED beneath the button (8) will now light

up. This mode provides an even more pleasant cooling effect, simulat-

ing a natural breeze. The fan speed of this breeze automatically varies

depending on the selected speed level.

Stadler Form Peter P-013 Руководство по эксплуатации онлайн [6/52] 772839

Содержание

Похожие устройства