Home
Главная
Krups
Кофемашина
EA81R870
Руководство по эксплуатации Страница: 28

Krups EA81R870 Руководство по эксплуатации онлайн [28/144] 774032

Automatic rinsing of the circuits when the machine starts.

■You can choose to program the machine to be rinsed automatically each time it is turned on. To do this, press the

maintenance and settings button (27). Using the navigation button , select the automatic rinsing programming

symbol . Press the button to choose ON which confirms this program. If you press the , button, automatic

rinsing is disabled.

■You can return to the coffee types menu by pressing the button.

Warning : after this rinsing process, hot water will be released from the coffee jet. Ensure that the drip tray is in place

even when the machine is not being used. The cycle lasts only a few seconds and stops automatically.

Cleaning program - total duration: approximately 13 minutes

You do not have to run the cleaning program as soon as the appliance requests it, but it must be done reasonably

soon after. If cleaning is postponed, the alert message will remain illuminated until the process is carried out.

■When the symbol lights up, you can run the automatic cleaning program by pressing the maintenance and

settings button . The symbol is selected. The function indicator is shown above the maintenance button

■the automatic cleaning program is divided into 2 stages: the cleaning cycle itself, followed by the rinse cycle. You

can clean the machine at any time by pressing the maintenance and settings button then, using the navigation

button select the cleaning symbol .

■To run this cleaning program, you will need a container which holds at least 0.6 L and which can be placed beneath

the coffee jets and the steam nozzle. The symbol flashes.

■Lift the cup grid (28).

■Insert the KRUPS cleaning tablet (29).

■Fill the water container to its maximum level of 1.7 L (2).

■Empty the coffee grounds collector and the drip tray (23-25).

■Put a 0.6 L container under the coffee and steam jets (30).

■Press START . The symbol becomes constant. The first phase (approximately 10 minutes) begins. When this

phase has finished, empty the container and the drip dray. The symbol flashes. Put the parts back in place.

■Press START . The symbol becomes constant, the final phase (approximately 3 minutes) begins. When this

phase has finished, empty the container and the drip tray. The cycle has finished, the coffee types menu appears.

Note: if you turn off or unplug your machine during cleaning or if there is a power failure, the cleaning program will

start from the beginning of the program once the power is restored to the appliance. It is not possible to postpone

this process. It is obligatory in order to rinse the water circuit. In this case, a new cleaning tablet may be necessary. It

is best to run the full cleaning program in order to avoid any risk of poisoning. The cleaning cycle is irregular: do not

put your hands under the coffee jets while the cycle is running.

Descaling program - duration: approximately 20 minutes

You do not have to run the descaling program as soon as the appliance requests it, but it must be done reasonably

soon after. If descaling is postponed, the alert message will remain illuminated until the process is carried out.

The amount of limescale collected depends on the hardness of your water.

Warning : if your product is fitted with our Claris - Aqua Filter System cartridge, remove the cartridge before descaling.

■When the symbol lights up, you can run the automatic descaling program by pressing the maintenance and

settings button (27). If necessary, using the navigation button, select the symbol. The symbol flashes

and the function indicator is located above the maintenance button .

■To run the descaling program, you will need a container which holds at least 0.6 L and a sachet of KRUPS descaler.

■Fill the water tank up to the CALC mark then pour in the contents of one sachet (31).

■Put a 0.6 L container under the coffee and steam nozzles.

■Press START to begin the first phase (approximately 8 min). The symbol becomes constant. When this phase

has finished, empty the container and the drip dray. The and symbols flash. Remove and clean the water tank

using a sponge.

■Once clean, refill your water tank and replace all parts. The symbol disappears.

■Press START to begin the second phase (approximately 6 min). The symbol becomes constant. When this

phase has finished, empty the container and the drip tray. The symbol flashes.

■ Press START to begin the final phase (approximately 6 min). The symbol becomes constant. When this phase

has finished, empty the container and the drip tray. Descaling is complete.

Krups EA81R870 Руководство по эксплуатации онлайн [28/144] 774032

Содержание

Похожие устройства