Yamaha CLP-220 Инструкция по эксплуатации онлайн [42/50] 9474
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Yamaha CLP-220 Инструкция по эксплуатации онлайн [42/50] 9474

Yamaha CLP-220 Инструкция по эксплуатации онлайн [42/50] 9474
CLP-220 èËÎÓÊÂÌËÂ
42
8. SYSTEM EXCLUSIVE MESSAGES (XG Standard)
(1) XG Native Parameter Change
Data format: [F0H] -> [43H] -> [1nH] -> [4CH] -> [hhH] ->
[mmH] -> [llH] -> [ddH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
1nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
|
F7H = End of Exclusive
Data size must match parameter size (2 or 4 bytes).
When the XG System On message is received, the MIDI sys-
tem will be reset to its default settings.
The message requires approximately 50ms to execute, so
sufficient time should be allowed before the next message is
sent.
(2) XG Native Bulk Data (reception only)
Data format: [F0H] -> [43H] -> [0nH] -> [4CH] -> [aaH] ->
[bbH] -> [hhH] -> [mmH] -> [llH] ->[ddH] ->...->
[ccH] -> [F7H]
F0H = Exclusive status
43H = YAMAHA ID
0nH = When received, n=0~F.
When transmitted, n=0.
4CH = Model ID of XG
aaH = ByteCount
bbH = ByteCount
hhH = Address High
mmH =
Address Mid
llH = Address Low
ddH = Data
| |
| |
ccH = Check sum
F7H = End of Exclusive
• Receipt of the XG SYSTEM ON message causes reinitializa-
tion of relevant parameters and Control Change values. Allow
sufficient time for processing to execute (about 50 msec)
before sending the Clavinova another message.
• XG Native Parameter Change message may contain two or
four bytes of parameter data (depending on the parameter
size).
•For information about the Address and Byte Count values,
refer to Table 1 below. Note that the table’s Total Size value
gives the size of a bulk block. Only the top address of the
block (00H, 00H, 00H) is valid as a bulk data address.
9. SYSTEM EXCLUSIVE MESSAGES
(Clavinova MIDI Format)
Data format:
[F0H] -> [43H] -> [73H] -> [xxH] -> [nnH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
01H = Product ID (CLP common)
xxH = Substatus
nn Control
02H Internal MIDI clock
03H External MIDI clock
06H Bulk Data (the bulk data follows 06H)
F7H = End of Exclusive
10.
SYSTEM EXCLUSIVE MESSAGES (Special Control)
Data format: [F0H] -> [43H] -> [73H] -> [66H] -> [11H] ->
[0nH] -> [ccH] -> [vvH] -> [F7H]
F0H = Exclusive status
43H = Yamaha ID
73H = Clavinova ID
7FH = Extended Product ID
4BH = Product ID
11H = Special control
0nH = Control MIDI change (n=channel number)
cc = Control number
vv = Value
F7H = End of Exclusive
Control Channel ccH vvH
Metronome Always 00H 1BH 00H : off
01H : –
02H : 2/4
03H : 3/4
04H : 4/4
05H : 5/4
06H : 6/4
7FH : No accent
Channel Detune
ch: 00H-0FH 43H (Sets the Detune value
for each channel)
00H-7FH
Voice Reserve
ch: 00H-0FH 45H 00H : Reserve off
7FH : on*
*
When Volume, Expression is received for Reserve On, they
will be effective from the next Key On. Reserve Off is normal.
11. SYSTEM EXCLUSIVE MESSAGES (Others)
Data format:
[F0H] -> [43H] -> [1nH] -> [27H] -> [30H] -> [00H]
-> [00H] -> [mmH] -> [
ll
H] -> [ccH] -> [F7H]
Master Tuning (XG and last message priority) simultaneously
changes the pitch of all channels.
F0H = Exclusive Status
43H = Yamaha ID
1nH = When received, n=0~F.
When transmitted, n=0.
27H = Model ID of TG100
30H = Sub ID
00H =
00H =
mmH = Master Tune MSB
llH = Master Tune LSB
ccH = don’t care (under 7FH)
F7H = End of Exclusive

Содержание

Похожие устройства

8 SYSTEM EXCLUSIVE MESSAGES XG Standard 1 XG Native Parameter Change 10 SYSTEM EXCLUSIVE MESSAGES Special Control Data format FOH 43H 73H 66H 11 H OnH ccH wH F7H Data format FOH 43H 1 nH 4CH hhH mmH H ddH F7H FOH Exclusive status 43H YAMAHA ID 1пН When received n 0 F When transmitted n 0 4CH Model ID of XG FOH Exclusive status 43H Yamaha ID 73H Clavinova ID 7FH Extended Product ID 4BH Product ID 11H Special control hhH Address High OnH Control MIDI change n channel number cc Control number mmH Address Mid vv Value H Address Low F7H End of Exclusive ddH Data I Control Channel F7H End of Exclusive Metronome Always OOH Data size must match parameter size 2 or 4 bytes 01H When the XG System On message is received the MIDI sys 02H 2 4 tem will be reset to its default settings The message requires approximately 50ms to execute so 03H 3 4 04H 4 4 sufficient time should be allowed before the next message is 05H 5 4 sent 06H 6 4 2 XG Native Bulk Data reception only Channel Detune ch 00H 0FH Data format FOH 43H OnH 4CH aaH ccH F7H 7FH No accent 43H Sets the Detune value for each channel 00H 7FH bbH hhH mmH H ddH Voice Reserve ch 00H 0FH FOH Exclusive status 45H OOH Reserve off 7FH on 43H YAMAHA ID When Volume Expression is received for Reserve On they OnH When received n 0 F will be effective from the next Key On Reserve Off is normal When transmitted n 0 4CH Model ID of XG aaH ByteCount 11 SYSTEM EXCLUSIVE MESSAGES Others Data format FOH 43H 1nH 27H ЗОН OOH OOH mmH H ccH F7H bbH ByteCount hhH Address High Master Tuning XG and last message priority simultaneously mmH Address Mid changes the pitch of all channels H Address Low FOH Exclusive Status ddH Data 43H Yamaha ID I I I I ccH Check sum F7H End of Exclusive Receipt of the XG SYSTEM ON message causes reinitializa 1пН When received n 0 F When transmitted n 0 27H Model ID of TG100 30H SublD 00H 00H tion of relevant parameters and Control Change values Allow mmH Master Tune MSB sufficient time for processing to execute about 50 msec UH Master Tune LSB before sending the Clavinova another message ccH don t care under 7FH XG Native Parameter Change message may contain two or four bytes of parameter data depending on the parameter size For information about the Address and Byte Count values refer to Table 1 below Note that the table s Total Size value gives the size of a bulk block Only the top address of the block OOH OOH OOH is valid as a bulk data address 9 SYSTEM EXCLUSIVE MESSAGES Clavinova MIDI Format Data format FOH 43H 73H xxH nnH F7H FOH Exclusive status 43H Yamaha ID 73H Clavinova ID O1H Product ID CLP common xxH Substatus nn Control 02H Internal MIDI clock 03H External MIDI clock 06H Bulk Data the bulk data follows 06H F7H End of Exclusive 42 ccH wH 1BH OOH off CLP 220 Приложение F7H End of Exclusive

Скачать