Stiga SBC 48 AE Руководство по эксплуатации онлайн [90/318] 779227

Stiga SBC 48 AE Руководство по эксплуатации онлайн [90/318] 779227
2
particularly on slopes or rough,
slippery and unstable ground.
If the machine is sold or
lent to others, make sure
that the operator looks
over the user instructions
contained in this manual.
2.2 PREPARATION
Personal Protective
Equipment (PPE)
Always wear slim-tting
protective clothes with
slash-proof protection, anti-
vibration gloves, helmet,
protective goggles, half-
mask respirator, protective
earplugs, cut resistant safety
boots with nonslip soles.
Use of hearing protections can
reduce the ability to hear any
warnings (shouting or alarms).
Be careful of what occurs
around you in the work area.
Never wear scarves, shirts,
necklaces, bracelets, loose
owing clothing, laces or ties
or any hanging or apping
accessory that could catch in
the machine or in any objects
or materials in the work area.
Tie your hair back if it is long.
Work area/Machine
Thoroughly inspect the entire work
area and remove anything that could be
thrown by the machine or damage the
cutting means/rotating units (stones,
branches, iron wire, bones, etc.).
2.3 DURING OPERATION
Work Area
Do not use the machine
in environments at risk of
explosion, in the presence
of ammable liquids, gas
or powder. Power tools
create sparks which may
ignite the dust or fumes.
Work only in daylight or
with good articial light in
good visibility conditions.
Keep persons, children and
animals away from the working
area. Get another adult to keep
the children under supervision.
Check that there is
nobody within 15 metres
of the machines range
of operation or within 30
metres for heavier cutting.
Avoid working with wet grass,
in the rain and when there
is a risk of a thunderstorm,
especially lightening.
Where possible, avoid working
on wet, slippery ground or in
any case on uneven or steep
ground that does not guarantee
stability for the operator.
Do not expose the machine
to rain or wet environments.
Water entering a power
tool will increase the risk
of electric shock.
Pay careful attention to uneven
ground (hills, dips), slopes,
hidden hazards and obstacles
that could limit visibility.
Be very careful near ravines,
ditches or embankments.
Always work across the face
of the slope and never up and
down it, being very careful
when changing direction,
making sure the cutting means
is always downstream.
Look out for trac when using
the machine near the road.
Behaviour
When working, the machine
must always be rmly held
in both hands, keeping the
power unit on the right of the
body and the cutting group

Содержание

Скачать