Hisense PL1H Руководство по эксплуатации онлайн [14/26] 785445

FILL THE TOP OF THE IMAGE TO THE SCREEN

If the top of the image is wider than the screen, then use the

wrench to rotate the center-front foot of the Laser Cinema

2. Now, rotate the Laser Cinema clockwise so that the bottom of

the image is parallel with the screen.

3. Repeat the steps above until the top of the image is parallel

with the screen.

4. Rotate the back-right foot clockwise to the same height as

the left one and make sure the Laser Cinema sits stably.

3. Repeat the steps above until the top of the image is parallel

with the screen.

4. Rotate the back-left foot to the same height as the right one

and make sure the Laser Cinema sits stably.

ADJUST THE UPPER-LEFT CORNER OF THE IMAGE

1. If the top of the image is higher on the left and lower on the

right, then use the wrench to rotate the back-left foot of the

Laser Cinema clockwise so that the bottom of the image

is also higher on the left. The upper-left corner will expand

further by default. Make sure part of the image is displayed

beyond the upper-left corner of the screen.

back-left foot

center-front foot