AENO EG1 (AEG0001) Руководство по эксплуатации онлайн [10/122] 791156

10 aeno.com/documents

NOTE that is you do not press the “Start” button, the grill will be switched to

the standby mode in 30 minutes, and the “OFF” message will be displayed.

At the end of the countdown, an audible signal will sound for 5 times. The

“DONE” message will be displayed.

See below the LED indication of the grill’s modes (See Figure c):

LED colour Grill mode

Blue

Preheating

is on

Green Preheating is finished

Yellow

Cooking is on

Red

Cooking is

finished

When you finished with cooking, press the “Cancel” button and unplug the

grill. Wait for the grill to cool down, then carefully remove the drip tray ❽ and

pour its contents down the drain. Don’t forget to wash the removable plates

and the drip tray with warm soapy water.

Troubleshooting

1. The grill does not turn on. Possible causes and solutions: Make sure that

there is no power supply failure in the mains socket (e.g. plug any known

good device into it) and that the grill is correctly plugged into the mains

socket.

2. The grill is switched on, but removable plates do not heat up. Possible causes

and solutions: Make sure that you set both the operating time and the

temperature and that the “Start” button was pressed.

3. The control panel does not light up. Possible causes and solutions: Unplug

the grill, let it cool down, and plug it in again.