Simfer CS3320A+ Руководство по эксплуатации онлайн [13/105] 791546

PART 3

MOUNTING YOUR CHEST FREEZER AND FIRST START-UP

1.Remove the plastic transportation stiffener elements which have

been placed between the upper lid and the body.

2.It is compulsory to have an air circulation at the backside so as to

get a satisfying efficiency from the freezer. You should leave at least

20cm space at the sides of your chest freezer.

3.After mounting the freezer, expect at least for 2 hours without

moving before starting to use it. Then plug your device.

Line voltage and frequency must correspond to the values

written on the label located on the backside of the product. If

the line voltage is too lower or higher than the indicated

values, supply the desired voltage by assuredly using a voltage

regulator. You may consult a qualified electrician in regard to this

issue. The fuse of the wall-socket where your device is plugged must

be 16A maximum.

Climate Class Statement

Household type coolers and freezers have the climate classes as

indicated below according to EN62552 standard.

Climate Class Acceptable ambient temperature

Class T +16

C and 43

Class ST +16

C and 38

Class N +16

C and 32

Class SN +10

C and 32

* Being a member of SN-T climate class, Simfer chest freezers that

you have purchased are designed to operate on average between 10

C and 43

Operating your device out of the anticipated ambient temperature

range may cause temperature decreases.