Тион Lite белый Руководство по эксплуатации онлайн [54/68] 791942

Compact ventilation device Tion Breezer Lite

Choose an appropriate place for installing the device on the wall using the

mounting template. Make sure that the installation site meets the following

requirements:

all safety requirements from Section 3 of this User Manual are met;

heaters, curtains, furniture and other objects should not impede the

installation or affect the normal device operation;

free access is provided to the device during its operation in order to

adjust its settings and monitor the parameters of operation by means

of the indicators;

the wall is at least 300 mm thick;

the wall surface is flat, ensuring the device fits evenly to the wall;

•

Remove the transportation packaging and examine the device carefully to make sure it has

no damage caused by improper transportation or storage. If you notice any damage, please

call the Vendor’s Service Center regarding further device operation.

A new device may have a characteristic plastic odor. Such an odor most likely comes from

the shipping package. Switch the device on for several hours at speed 5. If the odor persists,

please contact the Vendor’s Service Center.

For the device to be used properly, it must be mounted onto an indoor wall. Follow the steps

described below and listed on the mounting template.

6. SETUP

6.1. Unpacking and primary examination

6.2. Installation

WARNING!

After storage or transportation at low temperature, to avoid device failure, condensate

formation or damage to plastic parts, leave the device in a warm room for 2 h before

installing it.

WARNING!

The factory warranty covers only devices mounted by the Manufacturer’s certified

installation experts. Make sure that the installation expert fills in the warranty card with

all required data on installation.