Home
Главная
Karcher
Моющие Пылесосы
NT 20/1 Ap
Руководство по эксплуатации Страница: 11

Karcher NT 20/1 Ap Руководство по эксплуатации онлайн [11/176] 793759

Karcher NT 20/1 Ap Руководство по эксплуатации онлайн [11/176] 793759

English 11

ventilation at the location where

the device is to be disassem-

bled, for cleaning the mainte-

nance surface and to ensure

adequate protection for the per-

sonnel. ● The exterior of the de-

vice should be detoxified by

vacuuming and wiped clean, or

treated with sealant before be-

ing removed from the hazardous

area. All unit parts must be re-

garded as contaminated when

they are taken from the hazard-

ous area. Suitable measures

must be taken to prevent distri-

bution of the dust. ● All contami-

nated objects resulting from

maintenance and repair work

that cannot be satisfactorily

cleaned must be correctly dis-

posed of. Such objects must be

disposed of in sealed bags in ac-

cordance with the applicable

regulations for the disposal of

this type of waste. ● Dust class-

es M and H only: Close the suc-

tion opening with the plug when

transporting and servicing the

device. ● Dust class H only: The

effectiveness of the filtration of

the device can be tested by the

test method as specified in EN

60 335-2-69 22.AA.201.2. This

test must be carried out at least

annually or more frequently if

specified in national require-

ments. If the test result is nega-

tive, repeat the test with a new

flat fold filter.

몇 WARNING ● Safety devices

providing hazard protection

must be checked for correct

safety-related functionality at

least annually by the manufac-

turer or an appropriately instruc-

tion person, e.g. absence of

leaks, filter damage, functionali-

ty of the monitoring devices

(dust classes M and H only).

Devices with rotating brushes

 DANGER ● Risk of electric

shock. Never run over the mains

connection or the extension ca-

ble with the rotating brushes of

the suction head.

몇 CAUTION ● Unsuitable

brushes endanger your safety.

Only use the brushes supplied

with the device or brushes rec-

ommended in the operating in-

structions.

Devices with pneumatic tyres

몇 CAUTION ● Never exceed

the maximum permissible tyre

filling pressure. The tyre filling

pressure needs to be read on

the tyre and if necessary on the

wheel rim. If these values differ,

use the smaller value. ● Make

sure that the pressure reducer is

set correctly on the compressor

before setting the tyre filling

pressure. ● In case of devices

with screw-in wheel rims: Make

sure that all wheel rim bolts are

tightened securely before set-

ting the tyre filling pressure.

Содержание

Похожие устройства