Brayer 1701BR Руководство по эксплуатации онлайн [7/44] 794925
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer 1701BR Руководство по эксплуатации онлайн [7/44] 794925

Brayer BR1701 Руководство по эксплуатации онлайн [7/44] 796878
7
EN
• Disassemble the Juicer and wash the parts that
come into contact with fruit and vegetables when the
Juicer is in use.
• Remove the pusher (9) from the feeding chute (1).
• Turn the feeding chute (1) with the lter element (2)
counterclockwise until the «▲» mark matches the «
» mark on the top of the motor unit and remove
them (Fig. 1).
• Remove the juice collector (4) from the motor unit
upwards (g. 2).
• Remove the auger (3) from the juice collector (4)
(g. 3).
• Wash the removed parts (1-2, 3, 4, 9), the juice cup
(7), the pulp container (8) and the cleaning brush (10)
with warm water and a neutral detergent, then rinse
and dry.
• Wipe the motor unit with a slightly damp cloth, then
dry.
JUICE EXTRACTOR ASSEMBLING
• Place the juice extractor on an even, dry and stable
surface so that an electrical outlet is always easily
accessible.
• Make sure before assembling the juice extractor
that the silicone seal on the underside of the juice
collector (4) is in place (g. 4).
Notes: the silicone seal must t tightly into its place of
installation, otherwise the juice may ow out of the juice
collector (4) during the operation and damage the juice
extractor.
• Install the juice collector (4) on the motor unit (g. 5).
• Install the auger (3) into the juice collector (4), make
sure that the auger (3) is correctly installed, it must
be mounted on the driving shaft and sink slightly into
the juice collector (4), otherwise the installation of the
lling chute (1) with the lter element (2) will not be
possible.
• Install the feeding chute (1) with the lter element (2)
on the juice collector (4), the «▲» mark must match
the « » mark on the top of the motor unit, turn the
feeding chute (1) with the lter element (2) clockwise
to «
» (Fig. 7). Make sure the feeding chute (1) with
the lter element (2) are securely xed.
• Insert the pusher (9) into the feeding chute (1).
• Place the juice cup (7) under the spout (5) and install
the pulp container (8) (g. 8).
• The juice exractor is ready for use.
TIPS
• The Juicer is not intended for extracting juice from
fruits, containing high levels of
• pectin or starch, such as bananas, papayas, gs,
avocados, and etc., bananas contain little to no juice,
only add them for the scent.
• The Juicer is not intended to process too hard high-
ber foods, such as, coconuts, quinces, rheum, and
etc.
• Use other types of kitchen appliances to process
those kinds of food.

Содержание

Похожие устройства

Скачать