Home
Главная
Brayer
Шнековые Соковыжималки
1701BR
Руководство по эксплуатации Страница: 9

Brayer 1701BR Руководство по эксплуатации онлайн [9/44] 794925

• Do not use your ngers or any utensil other than

the included plunger (9) while inserting fruits and

vegetables into the feeding chute (1).

• Regularly check the lter element (2) for clogging

with pulp, if necessary switch the juice extractor o󰀨 by

setting the power switch (6) to the «0» position, and

disconnect the power plug from the electrical outlet.

• Turn the feeding chute (1) with the lter element (2)

counterclockwise until the «▲» mark matches the «

» mark on the top of the motor unit and remove

them (Fig. 1), rinse the lter element (2) under running

water and install it back by turning the feeding chute

(1) with the lter element (2) clockwise to «

» (Fig. 7).

Make sure the feeding chute (1) with the lter element

(2) are securely xed, insert the power cord plug into

an electrical outlet, switch the juice extractor on to

continue the operation.

• To mix di󰀨erent juices while the juice extractor is

running you can close the juice spout (5) lid (g. 9) and

continue pressing juice from another fruit or vegetable,

then open the spout (5) lid and pour the juice into the

cup (7).

• Close the spout (5) lid when pouring the juice from the

cup (7) or when the juice extractor operation is nished.

• If the auger (3) slows down during the juice extractor

operation, immediately switch the juice extractor o󰀨 by

setting the power switch (6) to the «0» position, after

the auger (3) stops rotating, move the power switch (6)

to the «R» position and hold it, the auger (3) reverse

rotation function will be activated. After a few seconds

release the power switch (6), disconnect the power

cord plug from the electrical outlet, turn the feeding

chute (1) with the lter element (2) counterclockwise

until the «▲» mark matches the «

» mark on

the top of the motor unit, and remove them (g. 1),

eliminate the cause of the auger (3) slow rotation.

Having eliminated the cause, install the feeding chute

(1) with the lter element (2) and continue using the

juice extractor.

• Once the juice container (7) has lled up, turn the

Juicer o󰀨 and pour the juice into a suitable container,

place the juice container (7) under the juice spout (5).

• Keep the juice container (8) full, turn o󰀨 the juicer

and remove the juice from the container (8).

Note: for your convenience, place an appropriately-

sized bag into the pulp container (10) to remove the

pulp together with the bag.

• Once you nish using the Juicer, turn it o󰀨 by setting

the power (6) to «0», and unplug it from the mains.

OVERHEATING PROTECTION

• Exceeding the operating temperature will trigger the

overheating protection and the Juicer will turn o󰀨.

• Should the Juicer turn o󰀨 on its own, set the power

(6) to «0» and unplug it from the mains.

• Depending on the room temperature, the electric

motor can take from 20 to 50 minutes to cool down,

Brayer 1701BR Руководство по эксплуатации онлайн [9/44] 794925

Содержание

Похожие устройства