Home
Главная
Brayer
Шнековые Соковыжималки
BR1703
Руководство по эксплуатации Страница: 7

Brayer BR1703 Руководство по эксплуатации онлайн [7/44] 794927

• Disassemble the Juicer and wash the parts that

come into contact with fruit and vegetables when the

Juicer is in use.

• Remove the pusher (1) from the feeding chute (2).

• Rotate the Feeding Chute/Lid (2-3) counter-clockwise

and remove it.

• Remove the Auger (4), Mesh Filter (5), and Separator

(6) from the Juice Bowl (7).

• Rotate the Juice Bowl (7) counter-clockwise and

remove it from the Motor Unit (8).

• Wash the removed parts (2-3, 4, 5, 6, 7), the juice

cup (13), the pulp container (14) and the cleaning

brush (15) with warm water and a neutral detergent,

then rinse and dry.

• Wipe the motor unit (10) with a slightly damp cloth,

then dry.

JUICE EXTRACTOR ASSEMBLING

• Place the juice extractor on an even, dry and stable

surface so that an electrical outlet is always easily

accessible.

• Before assembling the Juicer, make sure that the

Silicone Seal (12) inside the Juice Bowl (7) has been

properly reinstalled (g. 1).

Note: the Silicone Seal (12) must be rmly xated in its

place, otherwise juice may leak from the Juice Bowl (7)

during usage and cause damages to the Juicer.

• Place the Juice Bowl (7) onto the Motor Unit (10)

and rotate it in the clockwise direction all the way in

(g. 2).

• Insert the Mesh Filter (5) into the Separator (6) (g. 3).

• Align the « » red mark on the Mesh Filter with the «

» red mark on the body of the Juice Bowl (7) and

install the Mesh Filter (5) into the Juice Bowl (7).

Make sure that the Mesh Filter (5) has been installed

properly and secured in place (g. 4).

• Install the Auger (4) into the Mesh Filter (5); the Auger

(4) should secure itself on the driving shaft (g. 5).

• Install the Feeding Chute/Lid (2-3) onto the Juice Bowl

(7), align the « » red mark on the Feeding Chute/Lid

(2-3) with the « » red mark on the body of the Juice

Bowl (7), and rotate the Feeding Chute/Lid (2-3) in the

clockwise direction all the way in (g. 6). Make sure

that the Feeding Chute/Lid (2-3) has been properly

secured.

• Insert the pusher (1) into the feeding chute (2) (pic. 7).

• Place the Juice Container (13) under the Juice Spout

(9), place the Pulp Container (14) under the Pulp

Spout (8).

• The juice exractor is ready for use.

TIPS

• The Juicer is not intended for extracting juice from

fruits, containing high levels of pectin or starch, such

as bananas, papayas, gs, avocados, and etc.,

bananas contain little to no juice, only add them for

the scent.

• Fruit with softer seeds, such as apples, grapes,

oranges, and so on, can be juiced without removing

the seeds, however, adjust the amount of fruit being

Brayer BR1703 Руководство по эксплуатации онлайн [7/44] 794927

Содержание

Похожие устройства