Viewsonic VX1940W-4 Инструкция по эксплуатации онлайн [13/25] 97259

ViewSonic VX1940w 10

Do the following to adjust the display setting:

1. To display the Main Menu, press button [1].

NOTE: All OSD menus and adjustment screens disappear automatically after about 15

seconds. This is adjustable through the OSD timeout setting in the setup menu.

2. To select a control to adjust, pressSorTto scroll up or down in the Main Menu.

3. After the desired control is selected, press button [2]. A control screen like the one shown

below appears.

4. To adjust the control, press the up S or down T buttons.

5. To save the adjustments and exit the menu, press button [1] twice.

The following tips may help you optimize your display:

• Adjust the computer's graphics card so that it outputs a 1680 x 1050 @ 60Hz video signal to

the LCD display. (Look for instructions on “changing the refresh rate” in the graphics card's

user guide.)

• If necessary, make small adjustments using H. POSITION and V. POSITION until the

screen image is completely visible. (The black border around the edge of the screen should

barely touch the illuminated “active area” of the LCD display.)

The line at the bottom of the screen shows

the current functions of buttons 1 and 2:

Exit or select the Brightness control.