Home
Главная
Brayer
Конвекторы
BR4880
Руководство по эксплуатации Страница: 8

Brayer BR4880 Руководство по эксплуатации онлайн [8/44] 795870

Note: you can install the convection fan heater directly

on the feet (4) (pic. 1) or you can insert the wheels (5)

into the feet (4).

• Turn over the unit and place it on an even steady

surface.

Wall mounting

ATTENTION! When using the convection fan heater

in the bathroom, position the unit so that the distance

from the nearest faucet is at least 60 cm, and in no case

should splashes of water fall on the body and inside the

body of the unit.

Before drilling holes in the wall, make sure that there

is no electrical wiring or other communications at this

place.

• When mounting the unit on the wall, the distance

from all sides of the unit body to any objects should

be at least 300 mm (pic. 2), the mains socket should

be below the level of the unit body and easy to

access.

• Do not use the feet (4) with the wheels (5) when

mounting the unit on the wall.

• First mark the holes on the wall for the upper

brackets (6) (pic. 3).

• Drill two 8 mm holes in the wall to the required depth.

• Insert the dowels (pic. 3) into the drilled holes and

tighten the xing screws so that the xing screw goes

into the bracket (6).

• Align the screw caps with the holes in the upper wall

bracket (6), slide the unit to the left and lower it down,

making sure the convection fan heater hangs evenly

(pic. 4).

• Mark the places for drilling holes on the wall for the

lower brackets (6).

• Remove the unit from the wall.

• Drill 8 mm holes in the wall to the required depth for

the lower brackets (8).

• Insert the dowels into the drilled holes.

• Align the screw caps with the holes in the upper

wall bracket (6), slide the unit to the left and lower it

down, making sure the convection fan heater is xed

properly on the upper brackets (6).

• Fix the lower brackets (6) with two screws, make

sure that the convection fan heater is xed properly

on the wall (pic. 5).

USING THE CONVECTION FAN HEATER

• Place the convection fan heater vertically on an even

dry moisture- and thermal-resistant surface, do not

place it horizontally and do not turn it over.

• Use only the feet (4) or insert the wheels (5) in the

feet (4) when placing the unit on the oor.

• Do not place the convection fan heater on soft

surfaces, such as carpets with high pile, sofas or

beds.

• The distance between the convection fan heater and

the furniture should be at least 1 m.

Brayer BR4880 Руководство по эксплуатации онлайн [8/44] 795870

Содержание

Похожие устройства