Brayer BR4883 Руководство по эксплуатации онлайн [7/36] 795871
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR4883 Руководство по эксплуатации онлайн [7/36] 795871

Brayer BR4883 Руководство по эксплуатации онлайн [7/36] 796877
7EN
USING THE CONVECTION FAN HEATER
• Place the convection fan heater vertically on an even
dry moisture- and thermal-resistant surface, do not
place it horizontally and do not turn it over.
• Do not place the convection fan heater on soft
surfaces, such as carpets with high pile, sofas or
beds.
• The distance between the convection fan heater and
the furniture should be at least 1 m.
• To avoid mains overloading, do not switch on several
electrical appliances with high power consumption at
the same time.
• Insert the power plug into the mains socket, the light
indicator (3) will light up.
• Set the operation mode switch (4) into the necessary
position:
- «0» – the unit is o󰀨;
- « » – low power (1000 W);
- « » – maximal power (2000 W).
• Turn the thermostat control knob (5) clockwise to the
maximum position. When the desired air temperature
in the room is reached, turn the thermostat control
knob (5) counterclockwise until a distinctive click, in
this position of the thermostat the set air temperature
in the room will be maintained.
• To increase the air temperature in the room, turn the
thermostat knob (5) clockwise and counterclockwise
to decrease it.
Note: - the fan heater will not switch on if the thermostat
settings correspond to the air temperature in the room.
• After the unit operation is nished, turn the
thermostat control knob (5) counterclockwise as far
as it will go and set the operation mode switch (4) to
the position «0» and unplug the unit.
Note: - when you switch the unit on for the rst time,
some smoke or foreign odor may appear. It is normal
and not covered by warranty.
ANTIFREEZING FUNCTION
This function can be used in rooms with low
temperatures while preventing the water pipes from
freezing.
• The convection fan heater is equipped with an
antifreezing function, which switches the unit on if the
room temperature drops below +5ºC.
• To use this function, plug the power cord into a mains
socket and the light indicator (3) will light up, set the
operation mode switch (4) to the position « » or « »
and set the thermostat control knob (5) to the position
«0».
• The unit will remain switched o󰀨 until the room
temperature drops below +5ºC, then the unit
will automatically turn on and maintain the room
temperature above +5ºC.

Содержание

Похожие устройства

Скачать