Home
Главная
Brayer
Шнековые Соковыжималки
BR1701
Руководство по эксплуатации Страница: 7

Brayer BR1701 Руководство по эксплуатации онлайн [7/44] 796878

• Disassemble the Juicer and wash the parts that

come into contact with fruit and vegetables when the

Juicer is in use.

• Remove the pusher (9) from the feeding chute (1).

• Turn the feeding chute (1) with the lter element (2)

counterclockwise until the «▲» mark matches the «

» mark on the top of the motor unit and remove

them (Fig. 1).

• Remove the juice collector (4) from the motor unit

upwards (g. 2).

• Remove the auger (3) from the juice collector (4)

(g. 3).

• Wash the removed parts (1-2, 3, 4, 9), the juice cup

(7), the pulp container (8) and the cleaning brush (10)

with warm water and a neutral detergent, then rinse

and dry.

• Wipe the motor unit with a slightly damp cloth, then

dry.

JUICE EXTRACTOR ASSEMBLING

• Place the juice extractor on an even, dry and stable

surface so that an electrical outlet is always easily

accessible.

• Make sure before assembling the juice extractor

that the silicone seal on the underside of the juice

collector (4) is in place (g. 4).

Notes: the silicone seal must t tightly into its place of

installation, otherwise the juice may ow out of the juice

collector (4) during the operation and damage the juice

extractor.

• Install the juice collector (4) on the motor unit (g. 5).

• Install the auger (3) into the juice collector (4), make

sure that the auger (3) is correctly installed, it must

be mounted on the driving shaft and sink slightly into

the juice collector (4), otherwise the installation of the

lling chute (1) with the lter element (2) will not be

possible.

• Install the feeding chute (1) with the lter element (2)

on the juice collector (4), the «▲» mark must match

the « » mark on the top of the motor unit, turn the

feeding chute (1) with the lter element (2) clockwise

to «

» (Fig. 7). Make sure the feeding chute (1) with

the lter element (2) are securely xed.

• Insert the pusher (9) into the feeding chute (1).

• Place the juice cup (7) under the spout (5) and install

the pulp container (8) (g. 8).

• The juice exractor is ready for use.

TIPS

• The Juicer is not intended for extracting juice from

fruits, containing high levels of

• pectin or starch, such as bananas, papayas, gs,

avocados, and etc., bananas contain little to no juice,

only add them for the scent.

• The Juicer is not intended to process too hard high-

ber foods, such as, coconuts, quinces, rheum, and

etc.

• Use other types of kitchen appliances to process

those kinds of food.

Brayer BR1701 Руководство по эксплуатации онлайн [7/44] 796878

Содержание

Похожие устройства