Simfer 8611SM Руководство по эксплуатации онлайн [9/35] 800273

3.4. Installation Of Inner Duct Mounting Bracket

2 xing holes are drilled on the wall with Ø 6 mm electric drill at a

suitable height and place to x the inner duct hanger plate onto the wall.

6mm drywall anchors are nailed into those holes and inner duct mounting

brackrets are pinned down.At the last step of chimney hood installation,

the inner duct is screwed on the inner duct mounting brackets.

4. MOUNTING THE CHIMNEY HOOD ON THE WALL

Lift the chimney hood body and x the hanger plates onto the wall

anchors as shown in Figure 3.

4.1. Leveling The Chimney Hood

If the chimney hood is inclined on one side, the chimney hood

can be leveled with the adjustment screws as shown in Figure 4.

Once the balancing is complete, the screws shown in Figure 5 must be

xed tightly. After this, x the body with one screw through the hole on

the body.

4.2. Mounting The Aluminum Pipe

Place the aluminum pipe on the plastic duct. Place the other end of the

pipe into the air outlet in the kitchen. (Figure 6)

Figure 4Figure 3

Figure 5 Figure 6