Brayer BR4008 Руководство по эксплуатации онлайн [8/44] 803058
Макгруп McGrp.ru
Задайте вопрос
Зарегистрироваться

Brayer BR4008 Руководство по эксплуатации онлайн [8/44] 803058

Brayer BR4008 Руководство по эксплуатации онлайн [8/44] 803058
8
EN
• After you nish ironing, set the temperature control
knob (12) to the «MIN» position.
• Disconnect the power plug from the mains socket
and wait until the iron soleplate (11) cools down
completely.
Note: when switching the unit on for the rst time,
foreign smell can appear. It is normal.
STEAM IRONING
The iron is equipped with anti-drip valve that stops water
supply, if the soleplate (11) temperature is too low, it
prevents dripping from the soleplate (11) openings.
Steam ironing is possible only if the temperature control
knob (12) is set to the steam mode «•••» or «MAX».
• Place the iron on its base (9).
• Insert the power plug into the mains socket.
• Make sure that there is enough water in the water
tank (10).
• Turn the control knob (12) to set the required ironing
temperature in the steam mode «•••» or «MAX», the
indicator (6) will light up.
• When the temperature of the soleplate (11) reaches
the set point, the indicator (6) will go out and you can
start ironing.
• Set the necessary steam intensity with the continuous
steam «
, » supply knob (3): steam will be
released from the openings of the soleplate (11) only
if the iron is in horizontal position. To stop the steam
supply, put the iron vertically or set the knob (3) to
the position «
» (steam supply is o󰀨).
• After you nish ironing, set the temperature control
knob (12) to the position «MIN», and the continuous
steam supply knob (3) to the position «
» (steam
supply is o󰀨).
• Disconnect the power plug from the mains socket
and wait until the iron soleplate (11) cools down
completely.
ATTENTION!
If steam is not supplied during the operation, check
whether the temperature control knob (12) and the
steam supply knob (3) are set properly and whether
there is water in the water tank (10).
WATER SPRAY
• Make sure that there is enough water in the water
tank (10).
• Press the water spray button (5) to dampen the
fabrics.
BURST OF STEAM
• The burst of steam is useful for ironing folds and can
be used only in the high temperature ironing mode;
set the temperature control knob (12) to the position
«•••» or «MAX».
• When pressing the burst of steam button (4) steam
will go out of the iron soleplate (11) openings
intensively.
instr BR4008.indd 8instr BR4008.indd 8 07.10.2022 9:33:5107.10.2022 9:33:51

Содержание

Похожие устройства

Скачать