Home
Главная
Brayer
Парогенераторы
BR4152
Руководство по эксплуатации Страница: 10

Brayer BR4152 Руководство по эксплуатации онлайн [10/44] 803062

• If you do not press the steam button (6) « » within 20

minutes, the steam station will automatically switch

o󰀨, switch the unit on by pressing the on/o󰀨 button

(14) «

» and wait for the soleplate (5) to heat up.

STEAM CHAMBER CLEANING

• To prolong the life of the steam station and maintain

good steam performance, use the automatic

descaling function once every 2 weeks.

• Use the automatic descaling function more often in

the regions with «hard» tap water.

• The steam station will remind you about descaling

with a sound signal and a glowing indicator on the

steam chamber descaling button (13).

1. Make sure that the power plug (10) is not inserted

into the mains socket.

2. Remove the water tank (2) and ll it with water up to

maximal level «MAX» and install the tank (2) back to

its place.

Note: do not pour vinegar or any other descaling agents

into the tank (2).

3. Set the temperature control knob (7) to the position

«SHOT».

4. Connect the power plug (10) into a mains socket,

press the on/o󰀨 button (14) «

», the iron will switch

on and the light indicator (12) will ash. When the iron

soleplate (5) reaches the set temperature, the indicator

(12) will glow constantly.

5. Place the iron horizontally above the sink, press and

hold the steam chamber cleaning button (13), the light

indicator of the button (13) will ash, you will hear short

sound signals and the sound of the pump operating.

6. The duration of cleaning the steam chamber is

about 2 minutes, after the completion of the descaling

process, the light indicator of the button (13) will stop

ashing, the sound signals will stop.

• Switch the unit o󰀨 and unplug the power plug (10)

from the mains socket, wait until the iron cools down.

CLEANING AND MAINTENANCE

• Before cleaning the steam station make sure that it is

switched o󰀨 and the iron is cold and the power plug

is not connected to the mains socket.

• Wipe the steam station body (1) and the iron with a

slightly damp cloth, and then wipe them dry.

• You can remove the mineral deposit from the iron

soleplate (5) with a cloth soaked in table vinegar.

• Do not use abrasives or solvents to clean the steam

station body (1), the iron body and the soleplate (5).

• Avoid contact of the iron soleplate (5) with sharp

metal objects, as well as with metal buttons, zippers

etc.

• Do not immerse the steam station body (1), the iron,

the power cord and the power plug (10) into water or

any other liquids.

Brayer BR4152 Руководство по эксплуатации онлайн [10/44] 803062

Содержание

Похожие устройства