Lenco LBT-189 WALNUT Руководство по эксплуатации онлайн [8/166] 806886

Please check thoroughly and make sure you find the following items that

come along with this package:

1) Unit

2) Adaptor with EU-UK plug-end

3) Counterweight

4) Platter with Belt

5) 45 RPM Adaptor

6) Turntable mat

7) Instruction Manual

8) Cartridge Alignment Protractor

9) USB-PC Cable

10) 2pcs lid spare rubber

11) Anti-skating Weight

12) Line out cable

This turntable is supplied with a factory fitted and adjusted cartridge.

**The following instructions for adjusting the cartridge are provided in case

the cartridge is replaced by a different model at a later date.

Installing the Lid

Install the Lid carefully over the hinge prongs.

Turntable Platter and Belt Setup

1. Install the drive belt over the inner ring under the platter and make sure

it won’t fall off during the setup.

2. Place the platter through the turntable spindle,

then rotate the platter until you see the drive

motor pulley through the window at the top

left corner.

3. Carefully grab the drive belt and put it around

the slot of motor pulley.

4. Connect the power adapter to the turntable and power on the turntable.

5. Set the Motor Start/Stop switch to the Start position to see if the platter