Atlantic 002238 Руководство по эксплуатации онлайн [28/32] 807194

45 minutes before the programmed start-up time, and will then be activated at the same time every day

of the week.

Example of use.

For example, an optimally comfortable room temperature needs to be established by 07:00.

On the first day at 07:00 turn the mode selection wheel A to the position. The device starts heating

up the room at maximum power for two hours, and then after the two hours returns to regular operating

mode.

The next day, and every following day, the device will switch on at 06:15 in heating mode at maximum

power, so as to establish a comfortable room temperature by 07:00.

To activate the 2-hour intense operation function at a time other than that set for the automatic heating

every 24 hours function, hold in the mode selection wheel a for approximately one second. Indicator

light B will come on. The heating indicator light C will be lit.

The device will operate at maximum power for two hours, and then return to regular operating mode

(same as in the ON position).

To deactivate this function before the end of the two hours, press and hold in the wheel A for

approximately one second.

To deactivate the automatic heating every 24 hours function, change the position of the mode selection

wheel a.

At the end of the initiated cycle, the device returns to regular operating mode (indicator light B will be

on until the cycle is complete).

To stop the cycle quickly, turn the wheel to the OFF position. The automatic heating every 24 hours

function will be deactivated.

Towel heating and drying: use the 24h Auto Drying and locking function. To activate the 24h Auto

Drying and locking function, turn the mode selection wheel to the position. Indicator light B will come

on.

The device will operate at medium power for 2 hours and 15 minutes, then the heating will be switched

off (but the device will remain on).

This function can be deactivated at any time by holding in the mode selection wheel A for one second.

The 24h Auto Drying and locking function will be reactivated at the same time every day of the week.

The next time the 24h Auto Drying and locking function will be activated the next day 45 minutes before

the programmed time when first activated, and the function will be activated thereafter at the same time

every day of the week.

Example of use.

For example, the towels need to be warm by 07:00.

On the first day at 07:00 turn the mode selection wheel a to the position. The device will operate at

medium power for 2 hours and 15 minutes, then the heating will be switched off (but the device will

remain on).

The next day, and every following day, the device will switch on at 06:15 in heating mode at medium

power to heat up the towels by 07:00, and will then operate in drying mode until 2 hours and 15 minutes