Home
Главная
Brayer
Ручные отпариватели
BR4126
Руководство по эксплуатации Страница: 7

Brayer BR4126 Руководство по эксплуатации онлайн [7/36] 808674

7EN

• Open the water inlet lid (2). Fill the water tank (6) with

water non exceeding the MAX mark and close the

water inlet lid (2) tightly.

• Do not ll the tank (6) with carbonated water, perfume

additives, vinegar, chemical agents, etc.

• Place the steamer on a at, dry, moisture and heat

resistant surface, do not lay it horizontally and do not

turn it upside down.

• Plug the power cord into an electrical outlet, then

the indicator will light up in red, and when indicator

(3) lights up in blue, you can start working with the

steamer.

• Take the garment steamer by the handle (4) on the

same level.

• To switch the steam supply on, press and hold down

the button (5).

• To switch the steam supply o󰀨 release the button (5).

Note: for constant steam supply mode, move button

(5) to the locked position, and in order to turn o󰀨 the

constant steam supply mode, move button (5) to its

original position.

• Before general use of the garment steamer clean the

steam chamber. To do this, direct the outgoing steam

to a piece of cloth, for instance, try to smooth out a

kitchen towel.

• If during the operation the water tank (1) becomes

empty, before removing the tank (1) and relling it with

water switch the garment steamer o󰀨 by pressing the

on/o󰀨 button (8), disconnect the power plug (9) from

the mains socket.

• After the unit operation switch the garment steamer o󰀨

and remove the power plug from the mains socket and

let the garment steamer cool down.

Note: when the appliance is switched on for the rst

time, a foreign smell can appear. It is normal and is not

a warranty case.

AUTOMATIC SHUTDOWN OF THE STEAMER

• If the steamer power cord is plugged into an electrical

outlet and the steam function is not used for 8

minutes, the steamer will automatically turn o󰀨 and

light indicator (3) will ash red. To restart the steamer,

press steam button (5) and wait for operating surface

(1) to heat up, then light indicator (3) will turn blue.

• If you use the constant steam mode for more than 8

minutes, the steamer will automatically turn o󰀨 and

light indicator (3) will ash red. press steam button (5)

to restart.

USING THE BRUSH ATTACHMENT

ATTENTION! Before installing brush head (7), make

sure that the power cord is not plugged into an

electrical outlet.

• Place brush head (7) onto operating surface (1) of the

steamer.

• Open water inlet lid (2). Fill tank (6) with water up to

Brayer BR4126 Руководство по эксплуатации онлайн [7/36] 808674

Содержание

Похожие устройства