Accesstyle VH180N03DR Руководство по эксплуатации онлайн [32/48] 809765

1. Before using as shown in Figure 1, rotating the dust cup to

the position which corresponding to the mark “O”ensure that

the dust cup is equipped with a lter and HEPA.

2. As shown in Figure 2, rotate the dust cup back to the position

of mark “lock” till you hear a sound of “click”.

3. As shown in Figure 3, install the tube(the side without button)

into the dust cup and xed it.

4. As shown in Figure 4, install the motor brush into the tube(the

side with button) and xed it.

5. Press the on/off button as shown in Figure 5 to start working.

Press the + button again switch to high speed, press the +

button again switch to the standard speed. (the + button is

the switch button from high speed to low speed). Finally press

the on/off button again the vacuum cleaner stop working.

6. Adhere the wall hanger rmly to wall in the height of about

1 meter from the ground and near to the socket. Place the

vacuum cleaner upright near the wall hanger and store it

securely.

7. Ensure the vacuum cleaner is not working and in the upright

standing position, connect the adapter to the socket, and

then insert the adapter into the charging port on the vacuum

cleaner. When the blue light starts ashing, it starts charging.

8. You can also disconnect the battery from the main body of

the vacuum cleaner and charge it separately. To do this, hold

down the battery extraction button located on the handle of

the vacuum cleaner and pull the battery towards you.

To install the battery back, install the battery in the

compartment until it clicks.