Zyxel GS2200-24 Руководство пользователя онлайн [257/332] 810932

Chapter 34 Maintenance

GS2200-8/24 User’s Guide

257

34.2.3 Reboot System

Reboot System allows you to restart the Switch without physically turning the power off. It also

allows you to load configuration one (Config 1) or configuration two (Config 2) when you reboot.

Follow the steps below to reboot the Switch.

1 In the Maintenance screen, click the Config 1 button next to Reboot System to reboot and load

configuration one. The following screen displays.

Figure 167 Reboot System: Confirmation

2 Click OK again and then wait for the Switch to restart. This takes up to two minutes. This does not

affect the Switch’s configuration.

Click Config 2 and follow steps 1 to 2 to reboot and load configuration two on the Switch.

34.3 Firmware Upgrade

Use the following screen to upgrade your Switch to the latest firmware.

Make sure you have downloaded (and unzipped) the correct model firmware and version to your

computer before uploading to the device.

Be sure to upload the correct model firmware as uploading the wrong

model firmware may damage your device.

Click Management > Maintenance > Firmware Upgrade to view the screen as shown next.

Figure 168 Management > Maintenance > Firmware Upgrade

Type the path and file name of the firmware file you wish to upload to the Switch in the File Path

text box or click Browse to locate it. Select the Rebooting checkbox if you want to reboot the

Switch and apply the new firmware immediately. (Firmware upgrades are only applied after a

reboot). Click Upgrade to load the new firmware.

After the firmware upgrade process is complete, see the System Info screen to verify your current

firmware version number.