Millen MDW 452 Инструкция по эксплуатации онлайн [6/120] 811291

Using your dishwasher

Before using your dishwasher:

1. Set the water softener.

2. Loading the salt Into the softener.

3. Loading the basket.

4. Fill the detergent dispenser.

Please follow the steps below for adding dishwasher salt:

1. Remove the lower basket and unscrew the reservoir cap.

2. Place the end of the funnel (if supplied) into the hole and pour in about 1.5 kg

of dishwasher salt.

3. Fill the salt container to its maximum limit with water, It is normal for a small

amount of water to come out of the salt container.

4. After lling the container, screw back the cap tightly.

Loading The Salt Into The Softener

Note

Please check the section «Water Softener» on page 30, if you need to set the water

softener.

Warning

Only use salt specically designed for dishwashers use! Only ll with salt right before

running a cycle.