Home
Главная
Brayer
Блендер
BR1204
Инструкция по эксплуатации Страница: 7

Brayer BR1204 Инструкция по эксплуатации онлайн [7/32] 811581

7EN

you can add the required ingredients into the bowl (3).

To do this, remove the measuring cup (1) from the lid

(2). After adding ingredients through the lid (2) opening,

install the measuring cup (1) back to its place.

• After you nish using the unit, set the knob (9) to the

position «0», and disconnect the power plug from the

mains socket.

• To activate the pulse mode, turn the knob (9)

counterclockwise to the «Р» position and hold it down,

the backlight (8) will illuminate.

• After completing using the pulse mode, turn the knob

(9) to the «0» position and unplug the power cord from

the mains socket.

Note: if food processing is hindered, you can add some

water, liquor or juice etc. into the blender bowl (3).

ICE CRUSHING

• Put no more than 12 ice cubes with an approximate

size of 30x25x25 mm into the bowl (3).

• Switch on the pulse mode for a few seconds by turning

the knob (9) counterclockwise to position «P» and

holding it down, set the knob (9) to position «0». If

necessary, activate the pulse mode again to obtain the

desired consistency of crushed ice.

• After you nish using the unit, set the knob (9) to the

position «0», and disconnect the power plug from the

mains socket.

CLEANING AND MAINTENANCE

• Wash the bowl (3) preliminary, to do this pour some

water into the bowl (3) and add some neutral detergent.

• Cover the bowl (3) with the lid (2) with installed

measuring cup (1).

• Insert the power plug into the mains socket.

• Turn on the pulse mode, to do this turn the knob (9)

counterclockwise to the «Р» position and hold it, the

light (8) will illuminate, set the knob (9) to the «0»

position after a few seconds of blender operation.

• When you have nished rinsing the bowl (3), unplug

the power cord from the mains socket.

• Remove the lid (2) from the bowl (3).

• Remove the bowl (3) from the motor unit (7), drain the

washing solution, wash the bowl, rinse it and dry.

• Wash the measuring cup (1), the lid (2) and the lid seal

(2) with warm water and neutral detergent, rinse and dry.

• Wipe the housing of the motor unit (7) with a soft,

slightly damp cloth and then wipe it dry.

• Do not use abrasives and solvents to clean the motor

unit body (7) and the removable parts.

• Do not immerse the motor unit housing (7), power

cord and power cord plug in any liquids, and do not

place any removable parts in the dishwasher.

REMOVING AND INSTALLING THE CHOPPING

KNIVES (5)

• To remove the chopping knives (5) turn the lock

Brayer BR1204 Инструкция по эксплуатации онлайн [7/32] 811581

Похожие устройства