Home
Главная
Brayer
Соковыжималка
BR1709
Инструкция по эксплуатации Страница: 8

Brayer BR1709 Инструкция по эксплуатации онлайн [8/40] 811585

• Only put fruit and vegetables into the feeding chute

(2), when the grate lter (4) is rotating, while lightly

pushing them through with the plunger (1). Avoid

applying excessive force when pushing the plunger

(1), too much pressure can cause the grate lter (4) to

stop rotating. The slower the pace at which fruit and

vegetables are shredding, the greater the juice output

is.

• Do not use your ngers or any utensil other than

the included plunger (1) while inserting fruits and

vegetables into the feeding chute (2).

• Check whether the grate lter (4) is clogged up with

pulp regularly. If necessary, turn the Juicer o󰀨, by

setting the mode switch to «0», and unplug it from the

mains.

• Disassemble the Juicer, remove the grate lter (4),

wash the grate lter (4) in running water and reinstall it

back, reinstall the other removed parts and you will be

able to continue using the Juicer.

• Once the juice container (9) has lled up, turn the

Juicer o󰀨 and pour the juice into a suitable container.

Note: you can avoid dripping juice on the table by closing

the spout (6), after installing the juice container (9), open

the spout (6) to drain the juice.

• Watch the pulp container (10) as it lls, should the pulp

container (10) top up, turn o󰀨 the Juicer, and remove

the pulp from the pulp container (10).

Note: for your convenience, place an appropriately-

sized bag into the pulp container (10) to remove the pulp

together with the bag.

• Once you nish using the Juicer, turn it o󰀨 by setting

the mode switch (8) to «0», and unplug it from the

mains.

OVERHEATING PROTECTION

• Exceeding the operating temperature will trigger the

overheating protection and the Juicer will turn o󰀨.

• If the juicer turns o󰀨 by itself during operation, unplug

the power cord from the mains.

• • Depending on the temperature in the room, the

cooling time of the electric motor can be in the range

of 20-50 minutes, after the electric motor has cooled

down, plug the power cord into the mains and turn on

the juicer by pressing the button (11) «

».

• Should the Juicer fail to turn on, wait for some time,

if nothing changes this might indicate another defect.

In this case, please, contact an authorized service

center.

• Do not exceed the recommended operation time.

CLEANING AND CARE

• Perform cleaning of the Juicer after each use.

• Turn o󰀨 the Juicer and unplug it from the mains

before cleaning.

• Do not submerge the motor unit, power cable, or

power cable plug into water or any other liquid.

• Extract the plunger (1) from the feeding chute (2) of

the lid (3).

Brayer BR1709 Инструкция по эксплуатации онлайн [8/40] 811585

Похожие устройства