Home
Главная
Brayer
Соковыжималка
BR1710
Инструкция по эксплуатации Страница: 8

Brayer BR1710 Инструкция по эксплуатации онлайн [8/40] 811587

(1), too much pressure can cause the grate lter (4) to

stop rotating. The slower the pace at which fruit and

vegetables are shredding, the greater the juice output

is.

• Do not use your ngers or any utensil other than

the included plunger (1) while inserting fruits and

vegetables into the feeding chute (2).

• Check whether the grate lter (4) is clogged up with

pulp regularly. If necessary, turn the Juicer o󰀨, by

setting the mode switch (8) to «0», and unplug it from

the mains.

• Disassemble the Juicer, remove the grate lter (4),

wash the grate lter (4) in running water and reinstall it

back, reinstall the other removed parts and you will be

able to continue using the Juicer.

• Once the juice container (9) has lled up, turn the

Juicer o󰀨 and pour the juice into a suitable container.

Note: you can avoid dripping juice on the table by closing

the spout (6), after installing the juice container (9), open

the spout (6) to drain the juice.

• Watch the pulp container (10) as it lls, should the pulp

container (10) top up, turn o󰀨 the Juicer, and remove

the pulp from the pulp container (10).

Note: for your convenience, place an appropriately-

sized bag into the pulp container (10) to remove the pulp

together with the bag.

• Once you nish using the Juicer, turn it o󰀨 by setting

the mode switch (8) to «0», and unplug it from the

mains.

OVERHEATING PROTECTION

• Exceeding the operating temperature will trigger the

overheating protection and the Juicer will turn o󰀨.

• Should the Juicer turn o󰀨 on its own, set the mode

switch (8) to «0» and unplug it from the mains.

• Depending on the room temperature, the electric

motor can take from 20 to 50 minutes to cool down,

once it has cooled down, plug it into the mains and

turn the Juicer on, by setting the mode switch (8) to

«I» or «II».

• Should the Juicer fail to turn on, wait for some time,

if nothing changes this might indicate another defect.

In this case, please, contact an authorized service

center.

• Do not exceed the recommended operation time.

CLEANING AND CARE

• Perform cleaning of the Juicer after each use.

• Turn o󰀨 the Juicer and unplug it from the mains

before cleaning.

• Do not submerge the motor unit, power cable, or

power cable plug into water or any other liquid.

• Extract the plunger (1) from the feeding chute (2) of

the lid (3).

• Open the latches (7) and remove the lid (3).

• For your convenience, remove the grate lter (4)

together with the juice bowl (5), by grasping at the

juice bowl (5) and pulling it upwards.

• Wash the removed parts, juice container (9), and

pulp container (10) with warm water and a neutral

detergent, rinse and dry them.

Brayer BR1710 Инструкция по эксплуатации онлайн [8/40] 811587

Похожие устройства