Home
Главная
Brayer
Кофеварка
BR1115
Инструкция по эксплуатации Страница: 13

Brayer BR1115 Инструкция по эксплуатации онлайн [13/80] 811624

• To make two cups of cappuccino use a big lter (20)

and press the «Cappuccino»-button (8) twice; the light

indicator «

» will light up.

Note: if you need to switch the co󰀨ee maker o󰀨

during the cappuccino making, press the button (6)

«Cappuccino» again.

• Remove the cup with the ready drink from the grid (2).

• After you nish using the co󰀨ee maker, switch the

co󰀨ee maker o󰀨 by setting the switch (11) «0/I» to the

position «0».

• Wait until the co󰀨ee maker cools down, remove the

lter holder (20) and wash the lter (21 or 22).

• If there is some milk left in the cappuccinator, remove

the cappuccinator and put it in the fridge (pic. 12). If

you used all the milk during the co󰀨ee making, it is

recommended to remove and wash the cappuccinator

(see the chapter «CAPPUCCINATOR CLEANING»).

MAKING LATTE

ATTENTION! When making latte be careful to avoid

burns by outgoing hot steam.

• Make sure that the removable tray (1) and the tray grid

(2) are installed to their places.

• Fill the tank (13) with cold water, do not exceed the

maximal level mark, install the tank (13) back to its

place.

• Take the container (18), pull it towards yourself and

remove it (pic. 1), remove the cappuccinator lid (16)

from the container (18).

• Fill the container (18) with milk, do not exceed the maximal

level mark.

• Install the cappuccinator lid (16) on the container (18) and

install the cappuccinator back to its place until the lock

clicking.

• Install one of the co󰀨ee lters (21 or 22) into the lter

holder (20) matching the ledge on the lter (21 or 22) with

the hole on the holder (20) and turn the lter (21 or 22)

counter/clockwise.

• Add the required amount of ground co󰀨ee into the lter

(21 or 22) with a measuring spoon (22) and slightly tamp

the co󰀨ee in the lter (21 or 22) with the back side of the

measuring spoon (23) (pic. 5, 6, 7).

• Install the lter holder (20) into the installation place «

» and turn the handle (4) to the right as far as it will go «

» (pic. 2, 3, 4).

• Place a cup of suitable height and capacity on the grid (2)

(see the table «CHOOSING THE APPROPRIATE CUP»).

• Note: - During preliminary heating, you can warm up the

cups that will be used for making co󰀨ee by placing them

on the tray (6).

• Direct the cappuccinator pipe (15) into the cup using

the cappuccinator pipe angle adjustment bar (14), if

necessary, change the length of the cappuccinator pipe

(15) (g. 9).

• Turn the frothed milk supply (intensity) control knob (17)

to the right (in this position it produces more frothed milk).

Turn the frothed milk supply (intensity) control knob (17) to

the left (in this position it produces less frothed milk) (pic.

10, 11).

Brayer BR1115 Инструкция по эксплуатации онлайн [13/80] 811624

Похожие устройства