Home
Главная
Brayer
Кофеварка
BR1115
Инструкция по эксплуатации Страница: 9

Brayer BR1115 Инструкция по эксплуатации онлайн [9/80] 811624

• Set the milk supply intensity control knob (17) to the

middle position.

• Install one of the co󰀨ee lters (21 or 22) into the lter

holder (20) matching the ledge on the lter (21 or 22)

with the hole on the holder (20) and turn the lter (21

or 22) counter/clockwise. Do not add ground co󰀨ee

into the lter (21 or 22) when preparing the co󰀨ee

maker for work.

• Install the lter holder (20) into the installation place «

» and turn the handle (4) to the right as far as it will

go «

» (pic. 2, 3, 4).

• Place a cup of suitable height and capacity of at least

300 ml on the tray grid (2).

• Direct the cappuccinator pipe (15) into the cup using

the cappuccinator pipe angle adjustment bar (14).

Note: You can change the length of the cappuccinator

pipe (15) by turning the pipe (15) counterclockwise, then

extend it to the required length, and x the pipe (15) by

turning it clockwise (g. 9).

• Insert the power plug into the mains socket.

• Switch the co󰀨ee maker on by setting the power switch

(11) «0/I» to the position «I», the indicator (7, 8, 9) will

light up and start ashing.

• When the co󰀨ee maker is ready for operation, the

indicator (7, 8, 9) will glow constantly.

• To switch the cleaning mode on press the

«Cappuccino»-button (8) twice. After cleaning is

nished, all the light indicators of the control buttons

(7, 8, 9) will light up.

• After you nish cleaning the co󰀨ee maker, switch the

co󰀨ee maker o󰀨 by setting the switch (11) «0/I» to the

position «0».

• Pour the water out of the cup, take the container (18),

pull it towards yourself and remove (pic. 1), remove the

cappuccinator lid (16) from the container (18), pour the

remaining water from the container (18). Slightly lift the

front part of the tray (1) and remove it, pour the water

out of it and install the tray (1) back to its place.

• Turn the lter holder handle (4) to the left and remove it

(pic. 2, 3, 4). Wait until the lter holder (20) cools down

completely and remove the installed lter (21 or 22)

turning it counter/clockwise. Wash the lter (21 or 22)

and install it into the lter holder (20).

• If necessary, clean the boiler and the cappuccinator lid

(16) several times.

• After cleaning the co󰀨ee maker is ready for operation.

CHOOSING THE APPROPRIATE CUP

• Before making co󰀨ee, please, select a cup of

appropriate capacity according to the table:

Drink Estimated amount of the ready

drink

Espresso:

оne / double

90 ml/130 ml

Cappuccino:

оne / double

150 ml/270 ml

Latte:

one / double

280 ml/400 ml

Brayer BR1115 Инструкция по эксплуатации онлайн [9/80] 811624

Похожие устройства