Home
Главная
Brayer
Кофеварка
BR1113
Инструкция по эксплуатации Страница: 12

Brayer BR1113 Инструкция по эксплуатации онлайн [12/60] 811625

2. Make sure that the steam supply is closed. To

do this turn the knob (8) « » clockwise until

bumping.

3. Make citric acid solution: 2 teaspoons of acid to 1

litre of water and pour the solution into the water

tank (13). Install the tank (13) back to its place.

4. Install the co󰀨ee lter (5) into the holder. Do not put

ground co󰀨ee into the lter (5).

5. Install the lter holder (4) into the co󰀨ee maker.

The holder (4) ledges should match the grooves on

the boiler « Insert », after that turn the lter holder

handle (3) to the right until bumping « Lock ».

6. Place a suitable cup on the grid (2).

7. Insert the power plug into the mains socket.

8. Switch the co󰀨ee maker on by pressing the on/o󰀨

button (14) « », the button (14) indicator

will light up.

9. 9. Press the button (15) «

» and ll a cup of

about 100 ml capacity with water (it is necessary

to drain the water from the boiler and ll the boiler

with citric acid solution), switch the water supply o󰀨

by pressing the button (15) «

» again.

10. 10. Wait until the button (15) indicator stops

ashing and glows constantly, then switch the water

supply on by pressing the button (15) «

» and

ll a cup of about 100 ml capacity, press the button

(15) «

» again to switch the water supply o󰀨 and

pour the water out of the cup.

11. After a while repeat the procedure described in

the paragraph 10 and ll the cup of about 100 ml

capacity again.

12. Press the steam supply button (16) «

» and wait

until the button (16) indicator stops ashing and

glows constantly. Put a suitable bowl under the tip

(10) and slightly open the steam supply by turning

the knob (8) « » counterclockwise. Carefully

turn the knob (8) « » to the maximal steam

release position «●», release the steam for about

1 minute, then close the steam by turning the knob

(8) « » clockwise until bumping and switch the

steam supply o󰀨 by pressing the button (16) «

».

13. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (14) « ». Wait for 10-15 minutes.

14. Perform the steps 10 and 11 at least 3 times.

15. Repeat the cleaning procedure for the steam

release channels described in the paragraph 12.

16. With small intervals, repeat the boiler cleaning

procedure (paragraph 10) until the citric acid

solution dissolves in the tank (13) completely.

17. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (14) « ».

18. Fill the water tank (13) with clear water until

maximal level and repeat the steps 10, 12 at least 3

times without the 10-15 minute break.

19. Switch the co󰀨ee maker o󰀨 by pressing the on/o󰀨

button (14) « ».

Brayer BR1113 Инструкция по эксплуатации онлайн [12/60] 811625

Похожие устройства