Home
Главная
Brayer
Кофеварка
BR1113
Инструкция по эксплуатации Страница: 8

Brayer BR1113 Инструкция по эксплуатации онлайн [8/60] 811625

cup is lled with water, press the button (15) «

» again to switch the water supply o󰀨 and pour the

water out of the cup.

• Notes: - when you switch the water supply on for the

rst time, some foreign noise of the operating pump

is possible, since air comes out of the boiler, after a

while the noise will disappear.

• Wait until the button (15) indicator stops ashing and

glows constantly, then switch the water supply on

by pressing the button (15) «

». After the cup is

lled with water, press the button (15) «

» again

to switch the water supply o󰀨 and pour the water out

of the cup.

• Depending on the cup capacity repeat this procedure

several times until the boiler is clean.

ATTENTION!

• Do not remove the lter holder (4) during co󰀨ee

making.

• Do not remove the lter holder (4) immediately after

preparing co󰀨ee as there is redundant water and

steam pressure inside the lter (4), let the co󰀨ee

maker cool down completely.

• To remove the lter holder (4) turn the handle (3) to

the left «Insert» and remove the lter holder (4).

AUTO SWITCH OFF FUNCTION

• If no actions were performed during 25 minutes

after switching on, the co󰀨ee maker will switch o󰀨

automatically.

HOW TO MAKE A GOOD ESPRESSO

• Use ground co󰀨ee for espresso co󰀨ee makers.

• Slightly tamp the ground co󰀨ee in the lter (5), you

can do it with the back side of the measuring spoon

(17 ).

• Co󰀨ee strength depends on the quality and grinding

degree of co󰀨ee beans. If co󰀨ee is pouring out too

long, this means the co󰀨ee powder is too ne or it is

tamped too strongly.

PREHEATING

• To make a cup of hot espresso, it is recommended to

preliminary heat up the co󰀨ee lter (5) and the lter

holder (4).

• Open the lid (18) and ll the tank (19) with water, or

remove the tank (19) and ll it with water, then install

the tank (19) back to its place.

• Insert the lter (5) into the holder (4).

• Install the lter holder (4) into the co󰀨ee maker. The

holder (4) ledges should match the grooves on the

boiler «Insert», after that turn the lter holder handle

(3) to the right until bumping «Lock».

• Place a suitable cup on the grid (2).

• Make sure that the steam supply is closed. To do this

turn the knob (8) « » clockwise until bumping «•».

• Insert the power plug into the mains socket.

• Switch the co󰀨ee maker on by pressing the on/o󰀨

button (14) « », the button (14) indicator will

light up.

Brayer BR1113 Инструкция по эксплуатации онлайн [8/60] 811625

Похожие устройства