Home
Главная
Brayer
Пылесос
BR4205
Инструкция по эксплуатации Страница: 9

Brayer BR4205 Инструкция по эксплуатации онлайн [9/48] 811649

the exible hose (7) for obstruction. Remove the

obstruction, after that you can resume cleaning.

USING THE VACUUM CLEANER

• The dust bin (11) is equipped with the cyclonic lter

(24) which eliminates garbage and dust from the air,

and the foam lter (25) and the inlet lter (26) retain

the nest dust particles.

Note: provide that the HEPA lter (19) is always clean,

because the overall performance of the vacuum cleaner

depends on it.

Attention! Before switching on and using the vacuum

cleaner make sure that the cyclonic lter (24), the lters

(25, 26), the dust bin (11) and the outlet HEPA lter are

installed properly.

• Take the power plug and unwind the power cord to

the required length, connect the power plug to the

mains socket.

• The yellow mark on the power cord indicates the

maximum cord length. Do not pull out the power cord

further than the red mark.

• Press the on/o󰀨 button (13) to switch the vacuum

cleaner on.

• While cleaning you can control the suction power

using the manual suction power control (6) on the

exible hose handle (5) and by turning the suction

power control (17).

• After you nish cleaning, switch the vacuum cleaner

o󰀨 by pressing the on/o󰀨 button (13) and unplug it.

• To wind the power cord, press the button (18); keep a

hold of the winding cord with your hand.

• If you have to make a break during the cleaning,

switch the vacuum cleaner o󰀨 by pressing the button

(13) and install the brush (1) to the brush storage

(21).

ATTENTION! Before changing the attachments or

cleaning the dust bin (11), switch the vacuum cleaner o󰀨

by pressing the on/o󰀨 button (13) and unplug it.

CLEANING AND MAINTENANCE

Cleaning the dust bin (11)

• It is recommended to remove garbage and dust from

the dust bin (11) after every room cleaning.

• Switch the vacuum cleaner o󰀨 by pressing the on/o󰀨

button (13) and unplug it.

• Holding the handle (15), press the lock (14) and

remove the dust bin (11) (pic. 4).

• Place the dust bin (11) over a garbage bin.

• Press the clamp (22) and open the lower lid (23)

(pic. 5).

• Remove accumulated dust and garbage from dust

bin (11).

• Close the lid (23).

Brayer BR4205 Инструкция по эксплуатации онлайн [9/48] 811649

Похожие устройства