Home
Главная
Brayer
Пылесос
BR4208
Инструкция по эксплуатации Страница: 9

Brayer BR4208 Инструкция по эксплуатации онлайн [9/44] 811650

USING THE VACUUM CLEANER

The dust bin (11) is equipped with the cyclonic lter (24)

which eliminates garbage and dust from the air, and the

inlet lter (25) and the foam lter (26) retain the nest dust

particles.

Note: provide that the lter (25) and the foam lter (26)

are always clean, because the overall performance of the

vacuum cleaner depends on it.

Attention!

Before switching on and using the vacuum cleaner make

sure that the cyclonic lter (24), the lters (25, 26), the

dust bin (11) and the outlet HEPA lter (19) are installed

properly.

• Take the power plug and unwind the power cord to the

required length, connect the power plug to the mains

socket.

• The yellow mark on the power cord indicates the

maximum cord length. Do not pull out the power cord

further than the red mark.

• Press the on/o󰀨 button (16) to switch the vacuum

cleaner on.

• While cleaning you can control the suction power using

the manual suction power control (6) on the exible

hose handle (5) or by turning the suction power control

knob (17).

• After you nish cleaning, switch the vacuum cleaner o󰀨

by pressing the on/o󰀨 button (16) and unplug it.

• To wind the power cord, press the button (14); keep a

hold of the winding cord with your hand.

• If you have to make a break during the cleaning, switch

the vacuum cleaner o󰀨 by pressing the button (16) and

install the brush (1) to the brush storage (15).

ATTENTION!

Before changing the attachments or cleaning the dust

bin (11), switch the vacuum cleaner o󰀨 by pressing the

on/o󰀨 button (16) and unplug it.

CLEANING AND MAINTENANCE

Cleaning the dust bin (11)

• It is recommended to remove garbage and dust from the

dust bin (11) after every room cleaning.

• Switch the vacuum cleaner o󰀨 by pressing the on/o󰀨

button (16) and unplug it.

• Hold the dust bin handle, press the clamp (13) and

remove the dust bin (11) (pic. 1).

• Place the dust bin (11) over a garbage bin.

• Press the clamp (21) and open the bottom lid (20) (pic.

2).

• Remove accumulated dust and garbage from dust bin

(11).

• Close the lid (25).

• Install the dust bin (11) back to its place and make sure

that the dust bin (11) is xed properly.

Brayer BR4208 Инструкция по эксплуатации онлайн [9/44] 811650

Похожие устройства