Home
Главная
Brayer
Пылесос
BR4209
Инструкция по эксплуатации Страница: 10

Brayer BR4209 Инструкция по эксплуатации онлайн [10/44] 811653

• Pull the lock (21) of the upper lid (22) and open the

lid (22) (pic. 7)

• Remove the separator (20) (pic. 7), turn the HEPA

lter (19) clockwise and remove it (pic. 8).

• Remove dust and garbage from the separator (20)

(pic. 8).

• Wash the separator (19) under a warm water jet and

then dry it.

• Wash the HEPA lter (19) under a warm water jet and

dry it (pic. 8).

• Do not wash the parts in a dishwashing machine.

• Dry the HEPA lter (19) thoroughly.

• Do not dry the HEPA lter (19) with a hairdryer or

similar appliances.

• Wash the dust bin ask (23), wipe it and dry.

• Install the HEPA lter (19) in the separator (20) and

turn it counterclockwise as far as it will go.

• Insert the separator (20) into the ask (23).

• Close the lid (22) until the lock (21) catches.

• Install the assembled dust bin (11) back to its place,

make sure that the dust bin (11) is xed properly.

• Remove the outlet lter grid (18), turning it clockwise

and remove the outlet lter (17) (pic. 9).

• Wash the outlet lter (17) and the grid (18) under a

lukewarm water jet. Do not wash the outlet lter (17)

and the grid (18) in a dishwashing machine.

• Dry the outlet lter (17) and the grid (18).

• Install the outlet lter (17) back to its place.

• Install the grid (18) back to its place, turn the grid (18)

counterclockwise as far as it will go.

Vacuum cleaner body

• Clean the vacuum cleaner body with a soft, slightly

damp cloth, and then wipe it dry. Provide that no

liquid gets inside the vacuum cleaner body.

• Do not use solvents or abrasives for cleaning the

vacuum cleaner body and the attachments.

• Do not immerse the vacuum cleaner body, the power

cord and the power plug into water or any other

liquids.

OVERHEATING PROTECTION

• If the electric motor gets too hot during the operation,

the overheating protection system will be set o󰀨.

• If during cleaning the vacuum cleaner has switched

o󰀨, press the on/o󰀨 button (16) and unplug the unit.

• Let the vacuum cleaner cool down for 30-40 minutes

and switch it on again. The cool-down time can

di󰀨er from the given value, depending on the room

temperature.

Attention!

Before assembling and installing the dust bin (11)

back to its place, make sure that the HEPA lter (19),

the separator (20) and the ask (23) are dry.

Cleaning the outlet lter (17)

• Switch the vacuum cleaner o󰀨 and unplug the power

cord plug from the mains socket.

Brayer BR4209 Инструкция по эксплуатации онлайн [10/44] 811653

Похожие устройства