Home
Главная
Brayer
Пылесос
BR4226
Инструкция по эксплуатации Страница: 10

Brayer BR4226 Инструкция по эксплуатации онлайн [10/48] 811656

• Remove the dustbag holder (14) with the dustbag (15)

(pic. 9).

• Take the dustbag (15) out from the holder (14).

• Place the dustbag (15) above the garbage bin, remove

the plastic clamp and clean the dustbag (15) of garbage

and dust. You can wash the dustbag (15) with warm

water and soft detergent, rinse and dry thoroughly. After

that install the plastic clamp on the dustbag (15).

• Install the dustbag (15) into the holder (14).

• Put the dustbag holder (14) with the dustbag (15)

installed into the dustbag compartment body.

• Close the dustbag compartment lid (13) and slightly

press on the lid (13) until the lock (11) clicks.

Notes:

- do not try to close the lid (13) without the dustbag

holder (14) installed, otherwise you can damage the

lock or the lid (13);

- before closing the lid (13), always make sure that

the dustbag holder (14) and the dustbag (15 or

disposable paper dustbag 29) are installed properly.

Cleaning the lters

The vacuum cleaner operation e󰀩ciency depends on the

lters (16, 23, 24) condition. Clean the lters (16, 23, 24)

at least 4-5 times a year.

Cleaning the inlet lter (16)

• Switch the vacuum cleaner o󰀨 by pressing the on/o󰀨

button (17) and unplug it.

• Open the dustbag compartment lid (13) by pressing the

lid lock (11) (pic. 8).

• Remove the dustbag holder (14) with the dustbag (15)

(pic. 9).

• Take a hold of the inlet lter (16) and remove it by

pulling upwardsc (pic. 10).

• Wash the inlet lter (16) with warm water and soft

detergent, rinse and dry the lter (16) thoroughly, then

install the lter (16) back to its place.

Notes: before installing the inlet lter (16), make sure that

it is clean and dry.

• Install the dustbag holder (14) with the installed dustbag

(15 or disposable paper dustbag 29) in place.

• Close the dustbag compartment lid (13) and slightly

press on the lid (13) until the lock (11) clicks.

Outlet HEPA lter (23) and the foam lter (24) cleaning

• Switch the vacuum cleaner o󰀨 by pressing the on/o󰀨

button (17) and unplug it.

• Remove the outlet lter grid (25) by pressing the

clamps (26) (g. 11), take the HEPA lter (23) and the

foam lter (24) out.

• Wash the HEPA lter (23), the foam lter (24) and the

grid (25) under a lukewarm water jet; do not wash the

HEPA lter (23), the foam lter (24) and the grid (25) in

a dishwashing machine.

• Dry the HEPA lter (23) and the foam lter (24).

• Do not use a hair dryer or any other similar devices to

dry the HEPA lter (23) and the foam lter (24).

Brayer BR4226 Инструкция по эксплуатации онлайн [10/48] 811656

Похожие устройства