Home
Главная
Brayer
Вентилятор
BR4974
Инструкция по эксплуатации Страница: 7

Brayer BR4974 Инструкция по эксплуатации онлайн [7/40] 811659

7EN

THE UNIT IS INTENDED FOR HOUSEHOLD USE

ONLY, DO NOT USE THE UNIT FOR COMMERCIAL

OR LABORATORY PURPOSES.

BEFORE THE FIRST USE

After the unit’s transportation or storage at negative

temperature, unpack it and wait for at least 3 hours

before using it.

• Unpack the unit and remove all the packaging

materials.

• Keep the original package.

• Read the safety measures and operating recom-

mendations.

• Check the delivery set.

• Examine the unit for damages, in case of damage do

not plug it into the mains.

• Make sure that specied specications of power supply

voltage of the unit correspond to the specications

of your mains. No additional settings required when

using the device in the mains with 60 Hz frequency.

• Wipe the fan body with (1) a slightly damp cloth and

then wipe it dry.

FAN ASSEMBLY

• Fan is supplied with its Base (1) disassembled. Do not

turn on the fan without the Base (1).

• Unscrew the lock ring on the lower part the body by

turning it counterclockwise (pic. 1).

• Thread the power cable through the opening between

the two halves of the Base (1) (pic. 1).

• Align the two halves of the Base (1) and join them so

that the locks would trigger (pic. 1).

• Install the base (1) on the fan body (2) and screw the

fastening nut, rotating it clockwise (pic. 2).

• Put the power cord into the corresponding grooves

(pic. 3).

• Install the fan on the base (1) (pic. 4).

REMOTE CONTROL (13)

ATTENTION! A lithium battery is used in the remote

control. To avoid danger, do not allow children to

play with the battery. If your child has swallowed a

battery, immediately see a doctor.

Battery installation/replacing

• Press on the clamp and remove the battery holder

(20) from the remote

• control (13) body, insert a CR2025 (аre not included)

battery into the holder, strictly following the polarity

(pic. 5).

• Install the battery holder (20) into the remote control

(13).

Notes:

- if there is an isolation insert in the battery holder

(20), remove the insert;

- replace the battery in time;

Brayer BR4974 Инструкция по эксплуатации онлайн [7/40] 811659

Похожие устройства